Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Classic Series 3 inch cup pull gives cabinets a traditional handle shape with a defined grip surface, so doors and drawers open with a familiar feel that suits classic layouts in kitchens, baths, or shop-built casework.
The satin nickel finish presents a muted metallic surface, which reduces glare yet keeps a clean, finished look that blends with other satin nickel decorative hardware on a project. This helps maintain a consistent appearance across banks of doors and drawer fronts.
The pull is part of the Pro Value Series Classic Series collection, which ties this cup pull visually to other Classic Series pieces when a job calls for uniform style from base cabinets to uppers and utility storage.
A zinc die cast material body forms the pull, creating a solid metal part with fixed dimensions that stay stable once mounted on the cabinet face or drawer front, supporting repeatable layouts on multi-unit runs.
The manufacturer part number SZCL10-SN identifies this exact satin nickel version within the Classic Series, which helps align orders and job documentation across estimating, purchasing, and installation notes.
The 3 inch center to center measurement on this Pro Value Series cup pull directly drives where mounting holes land, so installers can rely on a standard 3 inch boring pattern for new work or replacements using this spec.
With a 3-1/2 inch overall length, the pull occupies a moderate span on the drawer or door front, which helps align it proportionally on typical cabinet widths without crowding narrow panels.
The 3/4 inch projection sets how far the pull stands off the surface, creating grip space while limiting how far handles extend into walkways or adjacent cabinet openings.
A 1-1/2 inch width defines the vertical space needed, allowing layout within rail heights and stile widths while maintaining room above and below the pull for trim or panel details.
The satin nickel finish works across cabinet runs where a soft metallic tone is specified, so this pull can serve as the handle choice whenever a satin nickel handle is called out in project notes.
This Pro Value Classic Series 3 inch cup pull suits cabinet doors and drawers built around a 3 inch center to center pattern, so it aligns naturally with layouts that call for that standard spacing on residential or shop cabinetry.
The satin nickel finish pairs with other satin nickel decorative hardware, which keeps visual continuity when knobs, hinges, and pulls on the same job share that finish across base cabinets, uppers, and storage units.
Because the overall length is 3-1/2 inches, the pull fits comfortably on common drawer fronts and door rails, allowing centered placement without dominating smaller fronts or getting lost on medium-sized faces.
The 1-1/2 inch width gives the pull enough vertical presence for a clear handhold while maintaining space around it, which supports designs that use narrow rails or smaller Shaker-style frames.
The zinc die cast construction delivers a metal handle suitable for decorative hardware and moldings work, so it can be specified as part of a consistent hardware schedule within that product class.
The defined 3 inch center to center spacing allows installers to reuse drilling jigs or boring machines set for 3 inch patterns, which speeds repeat drilling on multi-piece cabinet runs using this SZCL10-SN pull.
The 3/4 inch projection gives a known stand-off distance from the cabinet face, so designers and installers can plan clearances between adjacent doors and drawers, especially where handles might align closely.
The 3-1/2 inch overall length provides a fixed reference when setting out handle positions from cabinet edges, helping maintain consistent reveals and sight lines across a row of fronts.
The 1-1/2 inch width offers a predictable vertical dimension, so installers can reference rail heights or panel break lines when centering the pull, supporting neat visual alignment across cabinets.
The satin nickel finish and Classic Series designation tie this pull to similar Pro Value Series Classic pieces, which streamlines specification when a single hardware style is carried across a kitchen, bath, or storage area.
The manufacturer part number SZCL10-SN serves as the precise identifier for this configuration, helping purchasing and installation teams match the correct satin nickel, 3 inch center to center cup pull to their cabinet drawings.
The Pro Value Classic Series SZCL10-SN cup pull has a 3 inch center to center measurement, which sets the distance between mounting holes for layout and drilling.
The Pro Value Classic Series 3 inch cup pull has a 3-1/2 inch overall length, so it covers that span on the cabinet face when centered on drawers or doors.
The satin nickel SZCL10-SN cup pull projects 3/4 inch from the cabinet surface, providing finger clearance while keeping the handle close to the door or drawer front.
The SZCL10-SN Classic Series cup pull is 1-1/2 inches wide, defining the vertical space it occupies on the cabinet rail or drawer front.
This cabinet cup pull is made from zinc die cast material with a satin nickel finish, giving it a metal body with a muted metallic surface.
The Pro Value Series Classic Series designation identifies this pull as part of the Classic Series collection, helping coordinate matching decorative hardware on the same project.
The Pro Value Classic Series 3 inch cup pull brings a 3 inch center to center layout, 3-1/2 inch length, 3/4 inch projection, and 1-1/2 inch width together in one satin nickel zinc die cast handle for cabinet projects.
When a job calls for a Classic Series look in satin nickel with standard 3 inch spacing, the SZCL10-SN part number points to this specific Pro Value Series cup pull for consistent cabinet hardware across the project.
Sold In: 1 Each
