
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Pro Value Classic Series 3 inch pull is a zinc die cast cabinet handle in a weathered nickel finish, so it provides a classic metal feel with a muted look that suits many cabinet styles in shops, kitchens, or built-ins. The 3 inch center to center dimension defines the hole spacing, which matters when aligning with existing drill patterns on cabinet doors or drawers. The overall 4-5/16 inch length gives the hand more contact area than the screw spacing alone, which helps when opening heavier drawers. A 3/4 inch projection sets the pull off the door face enough for fingers to hook behind, while staying tight to the surface to reduce snagging on clothing in tight work areas. The 3/4 inch width balances the slim profile with enough edge surface to feel solid during repeated use.
The 3 inch center to center measurement sets the exact distance between mounting holes, which streamlines drilling jigs or re-using existing 3 inch layouts during replacements. The specified 8-32 x 1 screw size identifies the thread and length that match the pull, which matters when threading into standard cabinet door or drawer fronts of typical thickness. The 4-5/16 inch overall length helps in planning spacing between adjacent pulls, reducing crowding on smaller fronts. The 3/4 inch projection and 3/4 inch width together define the footprint on the face, which helps installers visualize clearance around edge profiles, adjacent doors, or trim details.
The 3 inch center to center spacing places this pull in a common size range for cabinet hardware, which suits many framed or frameless cabinet layouts that already follow 3 inch drilling standards. The weathered nickel finish supports use on cabinets where a softer metallic tone is wanted, such as traditional or transitional kitchens that use nickel-colored fixtures. The 4-5/16 inch overall length lets it work comfortably on both doors and medium-width drawers, giving enough grip without overwhelming narrow fronts. The 3/4 inch projection helps when cabinets sit near walls or appliances, because it offers finger room while keeping the handle closer to the face to limit interference. The 3/4 inch width makes it a practical option on face frames or narrow rails, allowing the pull to sit cleanly without running into edge profiles or panel details.
The Classic Series identity ties this pull to a defined style family, which is helpful when repeating the same look across upper cabinets, base units, and built-ins. The zinc die cast construction delivers a solid metal piece with repeatable dimensions, which supports consistent alignment from one door or drawer to the next across a row. The 3 inch center to center hole spacing simplifies jig setup because one jig can be used for each pull, saving layout time on multi-cabinet runs. The 4-5/16 inch total length makes reveals at door edges easier to keep uniform, because installers can visually balance the pull relative to stiles and rails. The 3/4 inch projection and 3/4 inch width keep the tactile feel predictable, which helps users experience the same grip and clearance whether they are at a sink base, pantry, or vanity in the same project.
The SZCL4-WN pull has a 3 inch center to center, 4-5/16 inch overall length, 3/4 inch projection, and 3/4 inch width, which together set hole spacing, reach, and face coverage.
The 3 inch center to center spacing matches a common drilling pattern, so installers can use standard jigs or existing 3 inch holes when placing or replacing this pull.
The Pro Value Classic Series 3 inch pull is made from zinc die cast material, giving it a metal body suited to frequent cabinet door and drawer operation.
The weathered nickel finish provides a muted nickel tone, helping the pull coordinate with nickel-colored hinges, faucets, or other decorative hardware in the same space.
The 4-5/16 inch overall length offers a longer gripping area than the hole spacing, which benefits users pulling wider or heavier drawers in regular use.
The 8-32 x 1 screw size indicates the thread and length that match the pull, which aligns with common cabinet door and drawer front thicknesses in many installations.
The Pro Value Classic Series 3 inch pull pairs a 3 inch center to center layout with 4-5/16 inch overall length, so it suits standard cabinet drilling patterns while giving a comfortable hand grip. The zinc die cast construction and weathered nickel finish provide a metal handle with a traditional nickel look that can coordinate across multiple cabinet runs. With its 3/4 inch projection and 3/4 inch width, this SZCL4-WN model offers practical clearance and a compact footprint that works on doors and drawers using common cabinet dimensions.
Sold In: 1 Each