Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Classic Series 3 inch cup pull gives cabinets a traditional grip shape that suits many kitchen and shop layouts. The 3 inch center to center dimension sets consistent spacing between holes, which keeps multiple fronts visually aligned on runs of doors and drawers. The 3 1/2 inch overall length frames the handhold area so the pull sits proportionally across a typical drawer stile or rail. A 3/4 inch projection brings the grip out from the front just enough for fingers to catch the edge. The 1 1/2 inch width defines a stable contact area against the surface, which helps the pull feel solid when opening heavier drawers. The oil rubbed bronze finish provides a dark, classic look that coordinates with similar bronze hinges or other bronze-finished hardware. Zinc die cast construction forms the pull from a single cast piece, which creates a rigid body for repeated use.
This oil rubbed bronze cup pull uses a 3 inch center to center hole spacing, which sets the exact distance installers drill or bore through the cabinet face. The 3 1/2 inch length then extends slightly past the hole centers on each side, which leaves enough metal at the ends to cover minor layout variations. With a 3/4 inch projection, the pull stands off the face to provide finger clearance while staying close enough to fronts for a tight visual line. The 1 1/2 inch width gives the pull a balanced vertical dimension, which helps it sit neatly within standard rail heights. The specified 8-32 x 1 inch screw size defines the threaded interface to the pull, which lets installers match this thread and length when selecting fasteners for the door or drawer thickness.
This Pro Value Series cabinet pull belongs to the Classic Series collection, which positions it for traditional and transitional cabinet styles that call for a cup profile. The 3 inch center to center measurement makes it suited to runs of base cabinets, vanities, and shop cabinetry that follow common hardware spacing. Its 3 1/2 inch overall length lets the pull sit centered on standard drawer fronts, which works well where rails and stiles are not excessively wide. The 3/4 inch projection supports use on drawers near walkways, because the pull does not jut too far into the room while still leaving space for fingers. A 1 1/2 inch width allows this zinc die cast cabinet pull to sit comfortably on mid-height drawer rails, which helps designers repeat the same model across upper and lower fronts. The oil rubbed bronze finish supports projects that pair dark pulls with lighter cabinet finishes.
The 3 inch center to center layout on this SZCL10-ORB cup pull simplifies jig use, because many drilling templates are patterned around this spacing, which speeds repetitive installation on large jobs. The defined 3/4 inch projection keeps pulls at a predictable stand-off, which helps installers maintain even shadow lines across banks of drawers. Its 1 1/2 inch width gives clear top and bottom edges to reference visually, which aids in setting the pull square to the stile or rail during fastening. The 3 1/2 inch length provides enough end material to visually align with door or drawer proportions, which reduces the likelihood of pulls looking undersized on typical cabinet faces. Zinc die cast construction delivers a single-piece body, which helps the pull resist flex when users pull against full-extension slides. The specified 8-32 x 1 inch screw size defines a standard machine thread, which allows consistent fastener engagement through typical front thicknesses.
This Pro Value Classic Series 3 inch cup pull has a 3 inch center to center dimension, which sets the spacing for drilled holes and keeps alignment consistent across doors and drawers.
The Pro Value Series cabinet pull has a 3 1/2 inch overall length, which gives enough coverage across the front for a clear handhold while staying proportionate to standard cabinet rails.
This oil rubbed bronze cup pull projects 3/4 inch from the surface, which provides room for fingers to grip while keeping the profile tight to the cabinet face.
The zinc die cast cabinet pull is 1 1/2 inches wide, which sets a stable footprint on the drawer or door and supports a comfortable hand contact area.
The SZCL10-ORB cup pull has an oil rubbed bronze finish, which matches projects that use dark bronze tones for hinges and other visible cabinet hardware.
The Classic Series cup pull is made from zinc die cast material, which forms a solid metal body suited to repeated drawer and door use.
This Pro Value Classic Series 3 inch cup pull pairs a 3 inch center to center layout with a 3 1/2 inch overall length, which suits many standard cabinet fronts. Its 3/4 inch projection and 1 1/2 inch width define a compact, usable grip profile for everyday operation. The oil rubbed bronze finish and zinc die cast construction combine appearance with a solid metal feel, which supports uniform hardware selection across a full run of doors and drawers.
Sold In: 1 Each
