Omega National 30"W Hickory Signature Arched Raised Panel Wall Mount Range Hood, Broan Compatible Liner Included - R2630SMB1HUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR2630SMB1HUF1 to RSR2630SMB1HUF1.

Omega National Hickory Range Hood For Wall Installs

Omega National 30 inch Hickory range hood is a wall mount wood range hood system built around Omega National Products part R2630SMB1HUF1, so installers get a defined 30 inch width hickory hood matched to a dedicated liner for consistent layout. The arched raised panel design gives this wall mount hood a signature profile, which helps tie higher-end kitchen cabinet runs together where appearance and wood species continuity matter. As a wood range hood in the Kitchen & Bath Cabinet Accessories category, it fits into standard cabinet planning for upper runs. Being made in the USA gives shops and installers a domestically produced option when project specifications call out American-made wood components. The hood works as part of a Broan compatible ventilation setup, giving a wood-faced solution that still uses familiar Broan ventilator models behind the liner for predictable performance.

Key Hood And Liner Details That Help Jobs

• This complete turnkey wood range hood system is described as including hood, liner, hanging hardware, and a choice of ventilation and chimney sizes, so installers can plan one integrated hood solution around a single 30 inch hickory unit.
• The wall mount range hood is offered in a defined 30 inch width, which allows straightforward cabinet and appliance spacing around standard 30 inch cooking surfaces and simplifies layout in typical kitchen runs.
• Hoods are available from this line in 30, 36, 42, and 48 inch widths and in five unfinished wood species, so shops can align hood sizing and wood species across different projects while keeping design and construction consistent.
• The system uses silver metallic liners that feature a cut-out sized to work with Broan NPRHVBB20SM 390 CFM and NPRHVBF10SM 250 CFM ventilators, which lets installers select between two familiar Broan ventilator units while keeping the liner interface predefined.
• The liner is described as Broan compatible, with that specific cut-out, so the ventilator opening is already engineered for those models, reducing layout work when integrating the metal ventilator components behind the wood shell.
• The hood is part of Omega National Products wood range hoods, which ties it into a known product class for kitchen projects that require a wood-faced vent solution matching cabinet materials and styling.

Wall Mount Hood Installation And French Cleat Hanging

This 30 inch hickory wall mount range hood is designed for simple installation using a patented French cleat hanging method, so the main body of the hood lifts onto a mating cleat rather than relying on more complex bracketing. That French cleat approach provides a defined mating surface on the wall, which helps with alignment during mounting and can streamline the sequence of hanging the wood shell before tying in ventilation. Because the Web Description specifies a wall mount range hood, the system is oriented toward wall applications rather than island layouts, aiding job planning for duct routing and cabinet framing. The matching liner for this hood is part of the same system, so its dimensions and fit are coordinated with the 30 inch hood body for an integrated install. This setup creates a wood exterior with a silver metallic interior liner matched to Broan NPRHVBB20SM or NPRHVBF10SM ventilators.

Using This Omega National Range Hood In Projects

Where This Wood Range Hood System Fits Best

This Omega National wood range hood system is positioned for kitchen projects using wood range hoods, so it aligns with cabinetry where design calls for a hickory appearance at 30 inches wide. The arched raised panel style gives the hood a signature front profile, which can mirror or complement raised panel cabinet doors in a run. Because the broader line offers 30, 36, 42, and 48 inch widths, a shop can standardize on this style across different cooktop sizes while maintaining a consistent design language. The five unfinished wood species across the line give flexibility to match other cabinet woods from the same manufacturer family, important for projects where species and finish selection drive the overall look.

Details That Support Repeatable Installation Results

The patented French cleat hanging method called out in the Web Description provides a specific mounting strategy, which can help installers repeat their process from job to job with the same hood style. That cleat-based hanging creates a clear sequence: the wall cleat is set, and the hood engages onto it, which supports controlled placement of this 30 inch wall mount hood in relation to adjacent cabinets. The silver metallic liner is engineered with a cut-out for Broan NPRHVBB20SM and NPRHVBF10SM ventilators, so the opening for the ventilator is predefined, reducing field modification when using those models. Because this is presented as a complete turnkey wood range hood system with hood, liner, hanging hardware, and a choice of ventilation and chimney sizes, it allows planning around a single coordinated solution from Omega National Products, with the chimney identified as sold separately where needed.

Common Questions About This Omega National Hood

Selecting This Hood For The Right Kitchen Application

Choosing the Omega National 30 inch Hickory range hood with Broan compatible liner lets you match a hickory wood appearance to a 30 inch wall mount cooking area while relying on a defined French cleat hanging method. The system pairing of hood and silver metallic liner, with a cut-out for Broan NPRHVBB20SM and NPRHVBF10SM ventilators, supports straightforward ventilator integration. For kitchen projects needing a raised panel, arched wood range hood made in the USA within the Omega National Products wood range hoods family, this R2630SMB1HUF1 model provides a coordinated starting point.