NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR2630SMB1CUF1 to RSR2630SMB1CUF1.
Omega National 30 inch cherry range hood defines this unit as a 30 inch wide, wall mount, raised panel wood range hood in cherry from Omega National Products, which gives a cabinetmaker a clear, furniture-style focal point sized for standard cooktop layouts. The product is described as a complete turnkey wood range hood system with hood and liner from the Omega National wood range hoods line, so a shop can specify one coordinated solution instead of piecing together a hood shell and a separate metal liner. The raised panel, arched design identified in the description creates a traditional profile, which suits kitchens built around framed cabinets and classic molding details. The wall mount configuration places the hood directly over a cooking surface on a wall, keeping the installation approach consistent with common upper cabinet runs above ranges.
The web description states that this wood range hood uses a patented French cleat hanging method, which means the installer lifts the hood body onto a mating cleat rather than holding it in place for through-fastening, simplifying wall mount work and helping position the unit accurately. The wall mount configuration defined in the product name places the hood directly against the wall above the range, so the mounting pattern aligns with standard wall stud layouts often used for upper cabinets. Because the system is sold as a wood range hood with a fitted liner, the installer can set the hood shell and liner as a coordinated pair, tying the carpentry work for the wood shell to the mechanical connection for the vent opening.
The product name identifies this unit as an Omega National 30 inch cherry Signature arched raised panel wall mount range hood, so it is intended for use in kitchen projects that call for a 30 inch wide focal hood above a cooking surface on a wall. The raised panel and arched styling referenced in the name supports designs built around traditional cabinet doors and crown profiles, which helps the hood visually integrate with cherry face frames and doors across the run. Because the category and product class both list wood range hoods, this piece functions as part of the finished cabinetry, letting the hood read as furniture-grade millwork rather than a separate appliance shell. The 30 inch width noted in multiple descriptions lines up with a common range size, so it fits into layouts where a 30 inch base range cabinet sits below and 30 inch wall space has been left between adjoining uppers.
The web description calls this a complete turnkey wood range hood system with hood and liner plus a choice of ventilation and chimney sizes, giving designers a wood shell and metallic liner while allowing selection from specified Broan ventilators and separate chimney components for vertical runs. The silver metallic liner is described as having a cut-out that accommodates Broan NPRHVBB20SM 390 CFM and NPRHVBF10SM 250 CFM ventilators, so the opening is preconfigured for these two models, which reduces layout work when pairing the hood with either airflow option. The same description notes that ventilators are not included and that the chimney shown is sold separately, so the mechanical contractor can select from the NPRHVBB20SM or NPRHVBF10SM ventilators and appropriate chimney sizes while the cabinet shop focuses on installing the wood hood and liner assembly. The web description also states that the product is made in the USA, which matters for projects that specify domestic wood hood manufacturing as part of their material standards.
The R2630SMB1CUF1 unit is an Omega National 30 inch cherry Signature arched raised panel wall mount wood range hood system with a Broan compatible silver metallic liner, intended for kitchen wall installations.
The patented French cleat hanging method lets the installer hang the hood body onto a mating cleat, which simplifies lifting, supports the weight during positioning, and helps achieve consistent alignment on the wall.
The silver metallic liner has a cut-out that accommodates Broan NPRHVBB20SM 390 CFM and NPRHVBF10SM 250 CFM ventilators, so the opening is matched to those two specified Broan units.
The web description states that hoods are available in 30, 36, 42, and 48 inch widths and in five unfinished wood species, supporting different span requirements and wood programs across kitchen projects.
The category and product class list it as a wood range hood, meaning the exterior hood shell is a wood component intended to coordinate with kitchen cabinets and trim work.
The web description specifies that this Omega National wood range hood system is made in the USA, which supports projects requiring domestically manufactured wood components.
This Omega National 30 inch cherry range hood system pairs a cherry Signature arched raised panel wood shell with a Broan compatible silver metallic liner, so a shop can specify one coordinated hood-and-liner solution for a 30 inch wall location. The patented French cleat hanging method described in the web details supports practical wall mounting during installation, and the liner cut-out is configured for Broan NPRHVBB20SM and NPRHVBF10SM ventilators, simplifying the ventilator interface. For kitchen projects calling for a 30 inch, wall mount, made in the USA wood range hood in cherry, this R2630SMB1CUF1 system offers a defined option that fits common range widths and traditional cabinet programs.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSRCHT30MUF1 Mfr# RCHT30MUF1 | 30" Wall Mount Trimmable Chimney for Signature Series Range Hood Covers, Maple | ||||
Sold in: 1 Each | RSRCHT30HUF1 Mfr# RCHT30HUF1 | 30" Wall Mount Trimmable Chimney for Signature Series Range Hood Covers, Hickory | ||||
Sold in: 1 Each | RSRCHT30CUF1 Mfr# RCHT30CUF1 | 30" Wall Mount Trimmable Chimney for Signature Series Range Hood Covers, Cherry | ||||
Sold in: 1 Each | RSRCHT30QUF1 Mfr# RCHT30QUF1 | 30" Wall Mount Trimmable Chimney for Signature Series Range Hood Covers, Alder | ||||
Sold in: 1 Each | RSRCHT30OUF1 Mfr# RCHT30OUF1 | 30" Wall Mount Trimmable Chimney for Signature Series Range Hood Covers, Red Oak |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSRHVB600SSV Mfr# RHVB600SSV | Broan Select Stainless Steel Range Hood Ventilator, 600 CFM | ||||
Sold in: 1 Each | RSDPRHVB400SS Mfr# RHVB400SS | 21-3/8" Broan Select Stainless Steel Range Hood Ventilator, 400 CFM | ||||
Sold in: 1 Each | RSRHVB400SS Mfr# RHVB400SS | 21-3/8" Broan Select Stainless Steel Range Hood Ventilator, 400 CFM | ||||
Sold in: 1 Each | RSDPRHVBF300SS Mfr# RHVBF300SS | Broan Select Stainless Steel Range Hood Ventilator, 260 CFM | ||||
Sold in: 1 Each | RSRHVBF300SS Mfr# RHVBF300SS | Broan Select Stainless Steel Range Hood Ventilator, 260 CFM |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RS903720007 Mfr# 903720007 | Replacement Charcoal Filter for Broan 260/400/600 CFM Ventilator |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Kit | RS90360DUC1 Mfr# 90360DUC1 | Interior Ductwork Kit for Broan 260/400/600 CFM Ventilator |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSRCH30QUF1 Mfr# RCH30QUF1 | 30" Wall Mount Standard Trimmable Chimney for Signature Series Range Hood Covers, Alder | ||||
Sold in: 1 Each | RSRCH30OUF1 Mfr# RCH30OUF1 | 30" Wall Mount Standard Trimmable Chimney for Signature Series Range Hood Covers, Red Oak | ||||
Sold in: 1 Each | RSRCH30HUF1 Mfr# RCH30HUF1 | 30" Wall Mount Standard Trimmable Chimney for Signature Series Range Hood Covers, Hickory | ||||
Sold in: 1 Each | RSRCH30CUF1 Mfr# RCH30CUF1 | 30" Wall Mount Standard Trimmable Chimney for Signature Series Range Hood Covers, Cherry | ||||
Sold in: 1 Each | RSRCH30MUF1 Mfr# RCH30MUF1 | 30" Wall Mount Standard Trimmable Chimney for Signature Series Range Hood Covers, Maple |