Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Deltana solid brass cabinet hinges give a cabinet project a full mortise, semi-concealed hinge that suits detailed work where appearance matters as much as function. These hinges use a solid brass construction, which provides the characteristic brass look buyers expect on higher-end cabinet doors. The hinge size of 2 inches by 1.5 inches suits smaller cabinet doors where a compact leaf profile is preferred. A polished brass PVD finish on the hinge presents a bright brass appearance while using a process designed for surface durability in normal cabinet environments. Ball tip finials are standard on these hinges, so the visible ends create a more finished, traditional hinge look when the cabinet door is open. As a Free Swinging Full Mortise hinge in the semi-concealed hinge class, this part supports typical cabinet door movement without built-in closing force, keeping the motion straightforward for everyday cabinet use.
The mounting type listed as Full Mortise means both the cabinet door and frame receive mortises to house the hinge leaves, so the leaves sit flush with the wood surfaces when installed. Square corners on the hinge give the mortise layout a simple rectangular shape without radius corners, aligning with straight-bit routing or hand-chisel work. The hinge uses six holes in the leaf pattern to accept #7 x 3/4 inch wood screws, giving a defined fastener size and length for anchoring into typical cabinet materials. A thickness of 0.093 inch on the hinge leaf informs how deep the mortise must be cut to keep the hinge leaf flush while supporting smooth movement of the knuckle. As a Free Swinging Full Mortise hinge, this design allows the cabinet door to swing on the knuckle without spring action, which suits applications where separate catches or latches handle door retention.
This hinge is identified as a Semi-Concealed Hinge in the Full Mortise Hinges category, so part of the hardware seats into the mortise while the knuckle and ball tip finials remain visible. That classification suits cabinet doors where the installer wants a more refined hinge appearance than a fully exposed surface hinge, but still values the traditional knuckle and finial detail along the door edge. Because the product is described as a cabinet hinge, it fits applications centered on cabinet doors rather than large architectural doors. The 2 inch by 1.5 inch size keeps the hardware scaled to smaller doors and lighter cabinet fronts common in kitchen, bath, and furniture-style cabinets. Ball tip finials supplied as the standard tip treatment give the hinge a classic detail at the top and bottom of the knuckle, which visually ties into other traditional cabinet hardware choices.
The full mortise mounting type and square corners together give installers clear geometry for door and frame preparation, which supports repeatable hinge placement across multiple openings. A leaf thickness of 0.093 inch defines the mortise depth, so repeated cuts at that depth help the hinge leaves sit flush and keep gaps consistent along the door edge. The six-hole hinge layout, matched with #7 x 3/4 inch wood screws, standardizes drilling and fastening steps from hinge to hinge, simplifying jigs and spacing. Deltana solid brass cabinet hinges described as coming in an array of fine finishes signal that this model fits into a broader finish family, which helps when aligning CH2015CR003 polished brass hinges with other Deltana hardware on the same project. The manufacturer part number CH2015CR003 ties directly to this 2 inch by 1.5 inch PVD polished brass version, which helps purchasing and installation teams call out the exact hinge needed for repeat orders.
The CH2015CR003 is a Deltana solid brass cabinet hinge classified as a Free Swinging Full Mortise hinge, so it suits mortised cabinet door installations where a traditional swinging action is desired.
The hinge measures 2 inches by 1.5 inches, which fits smaller cabinet doors where a compact hinge footprint is preferred on both the door and frame.
The full mortise mounting requires cutting pockets in both door and frame so the 0.093 inch thick leaves sit flush, keeping only the knuckle and ball tips prominently visible.
This hinge has a polished brass PVD finish, providing a bright brass appearance designed to coordinate with other polished brass cabinet hardware on a project.
The hinge is specified with #7 x 3/4 inch wood screws for the six hinge holes, which guides drilling and fastening choices in typical cabinet materials.
Ball tip finials are standard on this hinge, so the visible tips at the knuckle ends create a traditional decorative detail that matches classic cabinet styling.
The Deltana solid brass cabinet hinges in model CH2015CR003 combine a 2 inch by 1.5 inch size, full mortise mounting, and polished brass PVD finish, aligning with cabinet projects that call for compact brass hinges. Square-corner leaves, six screw holes, and #7 x 3/4 inch wood screw specification all contribute to predictable layout and fastening steps on doors and frames. When a cabinet run is planned around polished brass hardware with traditional ball tip finials, this Free Swinging Full Mortise hinge gives a defined option that matches that look while fitting the semi-concealed hinge category. Use this hinge specification when the project requirements call for this exact Deltana part number and size.