
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Deltana solid brass cabinet hinges are designed as semi-concealed, full mortise hinges, so the leaf sets into the cabinet and door while leaving a clean, minimal reveal that suits cabinet work. The 2 inch by 1.5 inch size keeps the hinge compact, which helps on smaller doors or tight face-frame layouts where space around the stile is limited. The oil rubbed bronze finish gives the hinge a dark, traditional look that coordinates with other bronze cabinet hardware, so jobs maintain a consistent visual line. Ball tip finials are standard on these hinges, adding a small but visible detail at the hinge ends that can match other ball-tipped hardware in the same run. The hinge is described as free swinging, which means the leafs move without built-in springs, so the door motion feels smooth and predictable during normal cabinet use.
The full mortise mounting type means both leaves of the hinge sit in pockets cut into the cabinet and the door, so once set, the barrel lines up at the edge and keeps the reveal tight. Square corners on the hinge work with straight mortise cuts, which suits router templates or hand-cut pockets that do not use corner rounding. Screw-on installation, using the specified #7 x 3/4 inch wood screws, lets installers fasten directly into common cabinet materials while the six-hole pattern spreads the pull across the mounting area. The 2 inch by 1.5 inch size keeps the mortise footprint modest, which is useful on narrow face frames or slimmer doors where larger hinges might crowd the edge or interfere with neighboring hardware.
The CH2015U10B hinge is identified as a semi-concealed hinge within the full mortise hinge category, so only the knuckle and finials remain visible when the door is closed, which supports clean cabinet faces. Its 2 inch by 1.5 inch proportions suit smaller cabinet doors, such as upper cabinets or narrow base cabinets, where a compact hinge footprint is important. The solid brass cabinet hinge construction aligns with typical woodworking applications, letting these hinges integrate into wood cabinet frames and doors in shops or onsite work. The oil rubbed bronze finish coordinates with other dark cabinet components in the same project, so hinge selection can follow the chosen bronze hardware scheme. Ball tip finials as standard add a decorative detail at each hinge end, so exposed hinge barrels become part of the visual design instead of a purely functional element.
The full mortise mounting style on these solid brass cabinet hinges sets a clear requirement for mortise depth matching the .093 inch hinge thickness, which helps installers cut consistent pockets and keep the door edge flush with the frame. Square corners reduce layout steps when using square templates or straight-edge routing, because the mortise footprint mirrors the hinge outline without extra corner trimming. Six hinge holes define a predictable screw pattern, which helps when marking pilot locations and repeating the setup across multiple doors in a shop run. The specified #7 x 3/4 inch wood screws work with typical cabinet material thickness, so screw penetration matches the hinge design and supports long-term holding power. The oil rubbed bronze finish and ball tip finials stay constant across hinges in the same part number, so once a project is laid out around CH2015U10B, every hinge in that job will present the same look and proportions.
The CH2015U10B is a Deltana solid brass cabinet hinge designed as a semi-concealed, full mortise hinge, so it sets into the wood while leaving the barrel visible.
The hinge size is identified as 2 inch by 1.5 inch, which suits smaller cabinet doors and tighter face-frame layouts.
The hinge uses an oil rubbed bronze finish, giving a dark bronze appearance that coordinates with similar cabinet hardware.
The full mortise mounting sets both leaves into the frame and door edges, which helps align the door and maintain a clean reveal along the hinge side.
This cabinet hinge has square corners and six hinge holes, matching square-cut mortises and providing multiple screw points for load spread.
The hinge is specified with #7 x 3/4 inch wood screws, which align with the hinge holes and typical cabinet stock thickness.
The Deltana solid brass cabinet hinges in the CH2015U10B part number combine a 2 inch by 1.5 inch footprint, .093 inch leaf thickness, and full mortise, square-corner layout to support accurate cabinet alignment. The oil rubbed bronze finish and ball tip finials carry a coordinated style across doors, while the six-hole, screw-on design with #7 x 3/4 inch wood screws provides stable mounting in common cabinet materials. For projects built around semi-concealed, full mortise hardware, these hinges match cabinet-scale dimensions and finish requirements so installations stay consistent from one door to the next.