Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Deltana solid brass cabinet hinges provide a free swinging action for cabinet doors, so doors move smoothly during everyday use. The hinges are sized at 2 x 1.5 inches, giving a compact footprint that suits smaller cabinet doors where a full-size door hinge would be oversized. The mounting type is full mortise, so the hinge sits into a cutout in the door and frame, helping create a clean, semi-concealed look on face-frame cabinets. The hinge thickness is .093 inch, which gives a substantial leaf that resists flex as the door is cycled. The polished brass finish delivers a bright metal appearance that matches other brass hardware on the job. Ball tip finials are standard, so each hinge presents a finished architectural detail at the hinge tips that aligns with traditional cabinet styling.
The mounting type is full mortise, so the hinge fits into routed or chiseled pockets in both the cabinet door and frame, allowing the leaves to sit nearly flush with the wood surface. This style suits semi-concealed face-frame hinges where only part of the hardware is visible when the door is closed. The hinge uses a screw-on installation with #7 x 3/4 inch wood screws specified, so the screw size and length match the hinge hole pattern and thickness. Square corners on the hinge tie directly to square mortise work, which can simplify routing when using straight bits without corner rounding. With six holes in the hinge leaf, fastening spreads across the hinge body, which helps distribute load and keeps the leaf seated against the mounting surface.
The CH2015U3 hinge is identified as part of the semi-concealed hinges product class, so it is intended for cabinet applications where part of the hinge shows while the rest is mortised into the structure. The 2 x 1.5 inch footprint works well on cabinet doors where a compact hinge is preferred, such as upper cabinets or smaller base doors. Being a full mortise hinge, it integrates with face-frame construction, allowing one leaf to bed into the door edge and the other into the frame stile for a tight joint. The polished brass finish supports use on projects where brass knobs, pulls, or other brass hardware set the visual theme. Ball tip finials as standard make the hinge suited to traditional or decorative cabinet runs, where the visible tips act as small but noticeable design points. As a solid brass cabinet hinge, it brings a non-ferrous base metal to locations where brass hardware is already specified.
The hinge thickness of .093 inch provides a predictable leaf dimension, so mortise depth can be set to match that thickness and bring the door and frame edges into the same plane. With square corners, layout is straightforward when using a square template or marking off the hinge outline directly, and the corners can be cut cleanly without needing a radius match. Six holes in the hinge offer multiple fastening points, so loads from door movement are spread across the screws and leaf rather than focused at only two or three locations. The specified #7 x 3/4 inch wood screws pair screw shank size with the hinge hole design, which helps the hinge seat firmly to the wood when driven. Full mortise mounting keeps the hinge leaves largely level with surrounding material, which helps maintain consistent reveal lines along the hinge side of the door and reduces interference with adjacent cabinets or trim.
The CH2015U3 is a Deltana solid brass cabinet hinge in the semi-concealed hinges product class, so part of the hinge is visible while the rest is mortised into the cabinet.
The hinge uses a full mortise mounting type, so both leaves are set into cutouts in the door and frame, bringing the metal close to flush with the wood surfaces.
The hinge is sized at 2 x 1.5 inches, providing a compact leaf size suited to cabinet doors rather than full-size entry or passage doors.
The CH2015U3 hinge has a thickness of .093 inch, giving a substantial leaf section that helps support door loads during regular cabinet use.
This hinge is specified with #7 x 3/4 inch wood screws, matching the hinge holes to a screw size and length suited to cabinet door and frame stock.
The hinge has a polished brass finish with ball tip finials as standard, giving a bright brass look with decorative tips that suit traditional cabinet styling.
The CH2015U3 Deltana full mortise hinge pairs a 2 x 1.5 inch solid brass body with a polished brass finish, so it serves cabinet doors where brass hardware is specified. With semi-concealed, full mortise mounting, square corners, .093 inch thickness, and #7 x 3/4 inch wood screws specified, it supports accurate cabinet door alignment in a compact footprint. For cabinet runs needing ball tip finials and a consistent brass appearance, this hinge offers a clear, defined specification to work into project layouts.