Deltana solid brass cabinet hinges give a free swinging action that lets cabinet doors move smoothly, which helps doors open and close without binding on face-frames. These semi-concealed hinges fit full mortise applications, so the leaf sits neatly cut into the cabinet and door edge for a clean installation. The hinges are made from solid brass, which provides a substantial feel that supports cabinet doors in everyday use. Ball tip finials are standard on these hinges, adding a finished look at the hinge ends that suits traditional and detailed cabinetry. The unlacquered polished brass finish exposes the raw brass surface, so the hinge can age naturally as cabinets see regular use and handling. The 2 inch by 1.5 inch size suits smaller cabinet doors where compact hardware keeps reveals tight. The square corners on the leaves match square mortises, which helps maintain crisp, accurate hinge pockets.
The 2 inch by 1.5 inch hinge size defines how much edge length is supported on cabinet doors, which helps plan mortise length and door spacing on smaller cabinet layouts. Full mortise mounting means both leaves sit flush in cut recesses, so the barrel projects from the edge while the leaf surfaces stay even with the wood. The .093 inch thickness sets the depth of those mortises, which guides how deep to cut so the hinge does not hold the door off the face-frame. Square corners on the leaves call for square-corner mortises, which suits straight cuts with a chisel for installers who work to tight lines. The #7 x 3/4 inch wood screws match the hinge holes, so the fasteners seat properly in the countersinks and support firm clamping of the leaves to the cabinet.
This hinge is part of the Deltana solid brass cabinet hinges line, so it is suited to cabinet door applications that need a smaller 2 inch by 1.5 inch footprint. As a semi-concealed hinge in the full mortise category, it fits face-frame cabinetry where most of the leaf is hidden in the mortise while the barrel remains visible along the door edge. The solid brass construction aligns with fine cabinet hardware, making it a match for built-ins and furniture-style cabinets that use brass details. The unlacquered polished brass surface sits in the unlacquered brass family, so it can develop a natural appearance as it reacts to handling and environment in occupied spaces. Ball tip finials at the hinge ends complement this style, giving a traditional profile where the hinge barrel is visible between the frame and door.
The free swinging design allows the door to move without spring tension, which lets installers check reveals visually while adjusting door position before final screw tightening. Full mortise mounting, defined clearly in the product data, sets a known relationship between the barrel centerline and the door edge, which supports consistent overlay or inset patterns across a run of cabinets. The .093 inch hinge thickness offers a predictable mortise depth, so cutting all pockets to that depth helps doors sit flush and reduces the need for later planing. Six screw holes in the hinge leaf give multiple fastening points, which spreads pull forces across the stile and can reduce the chance of hinge movement after repeated use. The specified #7 x 3/4 inch wood screws work with typical cabinet material thicknesses, giving thread engagement that supports door weight without requiring oversize fasteners. The square corners on the leaves align with straight-edged mortising, which helps installers use simple jigs or hand tools while still producing consistent, repeatable hinge seats across multiple doors.
The CH2015U3-UNL is a Deltana solid brass cabinet hinge in the semi-concealed, full mortise hinge category, which suits face-frame cabinet doors needing mortised leaves.
These Deltana solid brass cabinet hinges are described as 2 inch by 1.5 inch, so they support a compact hinge footprint suited to smaller cabinet doors and tight face-frame layouts.
This cabinet hinge uses a full mortise mounting type, meaning both leaves sit recessed into the cabinet and door edges for a flush fit around the hinge area.
The hinge is specified with #7 x 3/4 inch wood screws, so this size matches the hinge holes and provides appropriate thread engagement in common cabinet materials.
The Deltana unlacquered brass hinge has a thickness of .093 inch, giving a defined mortise depth and a solid brass section for cabinet door mounting.
The hinge uses ball tip finials as standard, so the hinge barrel ends show a rounded detail that matches traditional and decorative cabinet hardware styles.
The Deltana CH2015U3-UNL combines solid brass construction, a 2 inch by 1.5 inch format, and full mortise mounting, giving cabinetmakers a defined hinge geometry for smaller face-frame doors. At Wurth Baer Supply, this hinge sits within a broader hardware range for woodworking, so it can align with other project components drawn from the same source. The unlacquered polished brass finish and ball tip finials provide a traditional visible profile at the barrel, while the .093 inch thickness, six screw holes, and #7 x 3/4 inch screws support practical, repeatable installation on cabinet jobs.