Deltana solid brass cabinet hinges come in an array of fine finishes with ball tip finials as standard, so these hinges provide a coordinated look on cabinet jobs where visible tips matter. The hinge size of 2 inches by 1.5 inches defines a compact footprint that suits smaller cabinet doors where space around the stile is tight. The mounting type of full mortise means the leaves sit flush into the cabinet and door edge, supporting a cleaner line on face-frame installations. The square corners on the hinge simplify layout because the mortise can be cut with straight chisel or router passes without rounding. The hinge thickness of 0.093 inch gives a substantial leaf profile that supports consistent movement on typical cabinet doors. The free swinging design allows the hinge to move without built-in stops, which is useful when the door travel is controlled elsewhere in the cabinet design.
The full mortise mounting type on this hinge means both leaves are set into the door and cabinet edges so the barrel projects while the leaves sit flush, which helps doors close to the frame in semi-concealed applications. The square corners allow mortises to be cut to the exact 2 inch by 1.5 inch outline, helping reduce fitting time when repeating the same hinge layout across multiple doors. The specified thickness of 0.093 inch gives a reliable gauge for setting cutting depth, supporting even reveals from door to door. The #7 x 3/4 inch wood screw specification matches common cabinet stock thickness, offering solid engagement without extending through typical door or frame material.
This hinge is identified as a semi-concealed hinge in the product class, so it works in cabinet projects where part of the hardware is meant to show at the barrel and finials while most of the leaf is recessed. The 2 inch by 1.5 inch size suits many cabinet doors where a smaller hinge is appropriate and wide architectural butt hinges are unnecessary. Being part of the full mortise hinges category connects it to face-frame and cabinet work where the stile can accept a mortise. The antique brass finish aligns with traditional or warm-toned cabinetry, so the visible ball tip finials complement pulls and knobs in similar finishes.
The solid brass construction stated in the web description defines the base material, which is useful in interior cabinet environments where brass is commonly chosen for its metal characteristics and finish options. The free swinging description signals that the hinge operates through its full range without detents or hold positions, supporting straightforward door movement where other components define stops. As a Deltana Enterprises, Inc. product, the hinge sits within a line of cabinet hardware that uses coordinated finishes and forms, which benefits projects that repeat the same visual language across multiple rooms or banks of cabinets.
The specified hinge dimensions of 2 inches by 1.5 inches give a clear pattern for jigs or templates, which helps installers repeat mortises accurately on production runs of cabinet doors. The thickness of 0.093 inch translates directly into the depth setting on routers or mortising tools, so once the tool is set, each hinge pocket can be cut to the same depth for consistent alignment. The full mortise mounting type standardizes the relationship between barrel position and door edge, which supports predictable reveals around the door when multiple hinges are placed on tall fronts.
The square corners eliminate the need to radius the mortise, so straight bit router passes or chisel cuts can follow the leaf outline, reducing cleanup on each pocket. The #7 x 3/4 inch wood screw specification informs drill bit choice for pilot holes, helping reduce splitting in cabinet frames while still providing holding strength. The combination of semi-concealed product class and full mortise construction means the hinge can be laid out so that only the barrel and decorative ball tip finials remain visible, which maintains a clean cabinet face while still showcasing the antique brass finish where the hinge projects.
The Deltana CH2015U5 is a solid brass cabinet hinge described as a free swinging full mortise hinge, so it operates freely while the leaves are recessed into the door and cabinet edges.
The hinge is described as 2 inches by 1.5 inches, giving it a compact footprint suited to many cabinet doors where smaller hardware is appropriate.
The hinge has a full mortise mounting type, meaning both leaves are set into mortises in the door and cabinet so the barrel projects while the leaves sit flush.
The hinge has square corners, so mortises can be cut with straight edges to match the leaf outline, which can speed layout and reduce corner cleanup work.
The web description specifies #7 x 3/4 inch wood screws, which guides pilot hole size and expected penetration into typical cabinet door and frame material.
The hinge is listed with an antique brass finish and ball tip finials as standard, adding a traditional decorative touch where the barrel and tips remain visible on cabinets.
The CH2015U5 hinge combines a 2 inch by 1.5 inch leaf size, 0.093 inch thickness, and full mortise mounting to support consistent cabinet door alignment on semi-concealed applications. Solid brass construction with an antique brass finish and ball tip finials gives a coordinated look wherever the barrel is visible. The specified #7 x 3/4 inch wood screws and square corner leaves simplify mortise layout and fastening choices for repeat installations. For cabinet work that needs a compact, semi-concealed full mortise hinge in antique brass, this Deltana model aligns well with that requirement.