Deltana Free Swinging Full Mortise Hinges, Screw-on Polished Nickel - CH2015U14

Deltana Solid Brass Hinges For Cabinet Projects

Deltana solid brass cabinet hinges give you a compact hinge solution that matches common cabinet door layouts while using a solid brass body for a sturdy feel at the hinge point, which supports long-term door function on frequently used cabinets. The 2 x 1.5 inch size keeps the hinge footprint small, so it works where you need a tight layout or smaller face frames, helping avoid interference with adjacent doors or trim. A polished nickel finish provides a bright, metal-look surface that coordinates with polished nickel knobs and pulls, simplifying finish matching across a job. Ball tip finials on the hinge pins create a traditional decorative profile at the ends of the hinge barrels, which matters when the hinge edges remain visible on semi-concealed cabinet installations. The CH2015U14 part number clearly identifies this polished nickel version, helping you reorder the exact same hinge for future work.

Key Hinge Details That Support Cabinet Work

• The solid brass construction described by Deltana provides a metal hinge body at the pivot, which supports stable movement for cabinet doors under normal residential use where repeated opening stresses the hinge knuckles.
• The full mortise mounting type lets the hinge sit into a routed pocket, which helps keep the hinge aligned with the door and frame edges and maintains a cleaner look on semi-concealed cabinet hinges.
• The 2 inch by 1.5 inch hinge size fits smaller cabinet door applications, which helps when working on compact doors, narrow stiles, or tight overlay situations where larger hinges would crowd the layout.
• The polished nickel finish creates a smooth, reflective surface, which allows the hinge leaf edges and finials to visually coordinate with polished nickel decorative hardware on the same cabinet run.
• Square corners on the full mortise hinge align with square-routed hinge pockets, which can speed installation when you are using squared bits or templates instead of rounding pockets for radius-corner hinges.
• The .093 inch hinge thickness gives the leaf a substantial profile, which helps the leaves sit firmly in the mortise and resist flexing at the joint during repeated cabinet door cycles.

Full Mortise Screw-On Hinge Installation Details

This Deltana full mortise hinge is a screw-on style, so it attaches to wood with screws rather than welds or specialty fasteners, which suits cabinet doors and frames built from common hardwoods or sheet goods. The hinge uses #7 x 3/4 inch wood screws, so it is sized for bite in typical cabinet door and frame material thicknesses without over-penetrating thin stock. Square corners on the leaves pair with straight-edged mortises, giving a crisp transition from hinge to wood that helps alignment when doors need to sit flush with surrounding cabinetry. With a full mortise configuration, part of each leaf nests into the wood, so the barrel projects at the edge where the door pivots while the leaves remain largely level with the surface, supporting smooth door swing on semi-concealed installations.

Using This Semi-Concealed Full Mortise Hinge In Practice

Where This Semi-Concealed Hinge Works Best

This semi-concealed full mortise hinge fits cabinet applications where you want most of the hinge leaf recessed while leaving the barrel and finials visible along the edge, giving a traditional look on face-frame or frameless cabinetry that accepts mortised hinges. The 2 inch by 1.5 inch footprint suits smaller doors such as upper cabinets, narrow utility cabinets, or built-in casework, where compact hardware keeps the door edges clear and reduces visual bulk at the stile. Solid brass construction supports normal cabinet usage in kitchens, baths, or general built-ins, where repeated opening and closing focuses stress at the hinge knuckles and leaves. The bright polished nickel finish helps these hinges visually blend into polished nickel cabinet hardware suites so the visible hinge parts appear coordinated with pulls, knobs, and latches across the room.

Details That Support Consistent Cabinet Alignment

The full mortise mounting style means each leaf nests into a cut pocket in the door and frame, which sets a repeatable reference plane across multiple cabinets and helps maintain consistent reveal lines from one door to the next. Square corners on the hinge leaves align with straight-edged mortises, so layout can follow squared templates or jigs for uniform pockets, reducing variation in hinge position that might otherwise affect door gaps. With a .093 inch leaf thickness, the hinge sits firmly in the mortise without feeling flimsy, which supports tight, stable screw fastening into the surrounding wood. The #7 x 3/4 inch wood screw specification keeps fasteners sized for cabinet-grade material, helping the hinge grip securely without extending through typical door or frame stock. Ball tip finials on the hinge pins finish off the visible barrel ends, so once the door is hung the hinge presents a finished appearance at both the top and bottom of the barrel, which matters when doors are at eye level or installed in built-in furniture.

Common Questions About CH2015U14 Cabinet Hinges

Selecting This Polished Nickel Hinge For Cabinets

The Deltana solid brass cabinet hinges with polished nickel finish and ball tip finials provide a compact 2 x 1.5 inch full mortise option for semi-concealed cabinet doors, so you can match traditional visible barrels to polished nickel hardware. With CH2015U14 you get a specific hinge size, finish, and solid brass construction defined by Deltana, simplifying repeat use across multiple cabinets or future projects where consistent appearance and hinge geometry are important.