wing mounting plate with euro screw from Salice America provides the connection point between Salice hinges and the cabinet, so hinge forces transfer cleanly into the case and doors swing on a stable base. As a hinge mounting plate, it supports installation of Salice hinges in cabinet projects where a 30mm wing-style plate is required, keeping the hinge consistently located on the cabinet side. The plate is part of the Salice hinge mounting plates product class, so it ties directly into Salice hinge lines for a matched system. Its nickel-plated finish resists corrosion, so hinge settings stay serviceable in normal shop and cabinet environments. Being identified by manufacturer part number BARGRM9/16, it matches Salice documentation on layouts and drilling patterns, which supports repeatable setups across multiple jobs.
The two cam adjustable hinge mounting plates provide a cam height adjustment range of plus or minus 2 mm, so an installer can correct small vertical door reveals by turning the cam rather than relocating the plate. The same two cam system provides cam depth adjustment from -0.5 mm to +2.8 mm, allowing the door-to-cabinet gap to be tuned without redrilling, which is useful for getting even overlays on a run of doors. Cabinet side fastening with pre-mounted Euro screws ties the plate directly into Euro-style system holes, which speeds assembly and keeps all plates at a uniform depth and position. This combination of cam adjustment and Euro screw fastening gives both fine-tuning capability and predictable location during cabinet production and installation.
This hinge mounting plate is compatible with all Salice hinges, so it can be used on projects built around a uniform Salice hinge program. It is specified for series 100, 200, 400, F, M, universal hinges, and Silentia+, which means a single plate type can serve across these hinge families in the same shop workflow. Being in the hinges and hinge base plates category, it works as the cabinet-side component in a complete hinge assembly, so once it is fixed with the Euro screws, the hinge can be attached to the plate as part of standard Salice hardware practice. The 30mm sizing and wing style allow it to be integrated into cabinet layouts that follow Salice hinge drilling patterns, helping keep door reveals consistent from cabinet to cabinet.
The two cam adjustment built into the plate means installers can fine-tune both height and depth of the hinge relative to the cabinet. The cam height adjustment of plus or minus 2 mm provides enough travel to correct minor variances in cabinet construction or drilling, so door tops line up smoothly along a run. Depth adjustment from -0.5 mm to +2.8 mm lets the user move the door slightly closer or farther from the cabinet face, which is important when setting overlay, ensuring doors sit properly against adjacent surfaces. Because adjustment is done through cams rather than loosening the Euro screws, the plate remains firmly seated in the cabinet, helping maintain those settings over time. The nickel-plated stamped or die-cast steel body supports these adjustments on a rigid base, so cam movements translate accurately to door position without flex in the plate.
The BARGRM9/16 part is a wing mounting plate for Salice hinges, so it serves as the cabinet-side base that the hinge clips or fastens onto in a hinge assembly.
This mounting plate works with all Salice hinges and is specified for series 100, 200, 400, F, M, universal hinges, and Silentia+, allowing one plate style across those lines.
The two cam system provides plus or minus 2 mm height and -0.5 mm to +2.8 mm depth adjustment, so hinge position can be tuned for reveals without redrilling cabinet holes.
The mounting plate uses pre-mounted Euro screws on the cabinet side, tying directly into Euro system holes and giving consistent plate positioning across cabinets.
The plate is constructed of stamped steel or die-cast steel with nickel plating, providing a solid metal base and corrosion resistance in cabinet environments.
This Salice hinge mounting plate carries a lifetime warranty, so it is backed for long-term use in cabinet hinge assemblies.
This Salice America wing mounting plate with Euro screw, 30mm size, connects directly with series 100, 200, 400, F, M, universal hinges, and Silentia+ in one standardized setup. The nickel-plated stamped or die-cast steel body and two cam adjustment support precise, repeatable door alignment on cabinet jobs built around Salice hinges. For projects using Euro screw cabinet construction, this hinge mounting plate gives a consistent base that matches Salice part BARGRM9/16, so hinge runs can be laid out and adjusted with confidence.
Sold In: 1 Each