Domi Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 9mm

Domi Cam Mounting Plate For Salice Hinges

Domi cam adjustable wing mounting plate describes a hinge base plate designed to work with all Salice hinges, so it ties directly into existing Salice hinge lines on your cabinet runs. The plate is part of the Salice America hinge mounting plates class, so it matches that manufacturers geometry and system layout. A 9mm plate height positions the hinge arm in a known overlay range, which helps maintain a consistent reveal across a bank of doors. The plate is identified by manufacturer part number BARGR99/16, giving a precise reference when matching or repeating jobs. This model is described as screw-on, so it fastens by screws into the cabinet side for a secure mechanical connection. The product is also described as using a cabinet side fastening method with pre-mounted Euro screws, so it is set up for Euro-style system holes in cabinet sides.

Key Mounting Plate Details For Cabinet Work

• The plate is described as a premium two cam adjustable hinge mounting plate, so the built-in cams give fine tuning at the plate without loosening the main screws, which speeds door alignment on site.
• Construction is listed as stamped steel or die-cast steel with nickel plating, so the metal body carries load while the nickel plating resists corrosion in everyday kitchen or shop environments, supporting long-term hinge performance.
• Two cam adjustment provides cam height adjustment of plus or minus 2 mm, so you can move the door up or down slightly at the plate to align reveals between adjacent doors on a run.
• The same two cam system provides cam depth adjustment of -0.5 mm to +2.8 mm, so you can pull the door closer to or farther from the cabinet, which helps dial in side gaps and soft-close action.
• The cabinet side fastening method is described as pre-mounted Euro screws, so the plate is ready for system 32 style cabinet sides where Euro screws bite into the panel, giving a repeatable mounting position.
• The product carries a lifetime warranty, so the manufacturer backs the hinge mounting plate for long-term service, which supports confidence when standardizing on this hardware in production work.

Two Cam Adjustment And 9mm Plate Setup

The 9mm specification on this Salice hinge mounting plate establishes the plate height, so every plate sets the hinge arm at the same distance from the cabinet, which keeps overlay and door positions predictable. The premium two cam adjustable design provides height adjustment of plus or minus 2 mm, so a small turn on the cam moves the door up or down instead of shifting the whole plate. The same cam system delivers depth adjustment ranging from -0.5 mm to +2.8 mm, so you can nudge the door closer in or slightly out from the cabinet face to get margins and soft-close behavior where you want them.

Hinge Plate Use Across Salice Hinge Series

Mounting Plate For Multiple Salice Hinge Lines

This Salice America hinge mounting plate is stated as being for series 100, 200, 400, F, M, universal hinges, and Silentia+, so one plate pattern can be used across a wide list of Salice hinge families on the job. Being compatible with all Salice hinges in that list simplifies hinge planning because the same 9mm plate can serve for standard, compact, and Silentia+ applications where these hinge series are specified. The plate sits in the hinge base plates category, so it fills the role of the cabinet-side interface that the hinge arm clips or fastens to during installation. Using a single identified part, BARGR99/16, for these hinge series makes reorders and service replacements straightforward when matching an existing installation.

Two Cam Adjustments For Consistent Cabinet Results

The premium two cam adjustable hinge mounting plate uses one cam for height and one for depth, so each door can be fine tuned without shifting the screw positions in the cabinet side, which helps preserve the integrity of Euro screw holes over time. The height cam adjustment of plus or minus 2 mm provides enough travel to straighten a door edge that is slightly high or low relative to a face frame or adjacent door, supporting a clean visual line on completed cabinets. Depth cam adjustment from -0.5 mm to +2.8 mm allows the door to sit slightly closer to or farther from the cabinet, which is especially useful when balancing overlay with gasket lines or adjacent panels. Because the plate is constructed of stamped steel or die-cast steel with nickel plating, the cams operate in a rigid metal body, so the small adjustments you set at install stay stable during normal cabinet use. When combined with the cabinet side fastening using pre-mounted Euro screws, these cams provide a controlled, repeatable method for dialing in fit on production runs and field installations.

Common Questions About This Salice Mounting Plate

Choose This Plate For Salice Cabinet Projects

The Salice America Domi cam adjustable wing mounting plate with 9mm height, two cam adjustment, and nickel-plated stamped or die-cast steel construction offers a defined setup for projects using listed Salice hinges. Pre-mounted Euro screws on the cabinet side fastening method match system-style cabinet construction, while the cam height and depth adjustments give you practical on-site tuning. For work that specifies Salice series 100, 200, 400, F, M, universal hinges, or Silentia+, this hinge mounting plate provides the cabinet-side base that supports consistent layout and repeatable hardware choices job after job.