Domi 2-Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 0mm, BARGL09F16

Domi 2-Cam Adjustable Wing Mounting Plate Use

Domi 2-cam adjustable wing mounting plate is a Salice America hinge mounting plate designed for installers who need precise cabinet door alignment across multiple jobs. This hinge mounting plate belongs to the hinge mounting plates class, so it provides the interface between cabinet and Salice hinge for stable door support. The 0mm plate height sets the hinge at a neutral position, which helps maintain consistent reveals when working with standard cabinet layouts. Being classified under hinges and hinge base plates ties it directly into common cabinet door installation workflows where repeatable positioning is critical. The manufacturer part number BARGL09F/16 identifies this specific plate when matching it to drawings, job specs, or reorders. Sold through Wurth Baer Supply, it fits into a professional woodworking environment that relies on consistent hardware sourcing.

Key Mounting Plate Details For Daily Work

• The plate is described as a premium two cam adjustable hinge mounting plate, which gives installers separate cam controls for height and depth so they can fine tune door alignment without shifting the cabinet.
• The mounting plate is constructed of stamped steel or die-cast steel with nickel plating to resist corrosion, so it holds up in typical shop and kitchen environments where metal is exposed to handling and moisture over time.
• Two cam adjustment provides cam height adjustment of plus or minus 2 mm and cam depth adjustment of -0.5 mm to +2.8 mm, giving clear adjustment ranges for correcting door gaps and flushness after the hinge is mounted.
• The cabinet side fastening method is pre-mounted Euro screws, which speeds installation because the screws are already positioned for driving into the cabinet side.
• The plate carries a lifetime warranty, which supports long-term projects where hardware performance is expected to match the service life of the cabinetry.
• This mounting plate is for series 100, 200, 400, F, M, universal hinges, and Silentia, so it can be used across a broad set of Salice hinge lines on one project.

Installation And Adjustment Setup Details

The Salice America mounting plate uses a screw-on, or screw-in, method on the cabinet side, described as cabinet side fastening with pre-mounted Euro screws, so installers drive the existing screws instead of locating new positions. The 0mm mounting plate height defines a neutral offset between door and cabinet, which helps when following standard drilling patterns for Salice hinges. Two cam adjustment with plus or minus 2 mm in height and -0.5 mm to +2.8 mm in depth lets installers move the door in controlled increments instead of slotting or redrilling holes. The plate sits within the hinges and hinge base plates category, so its geometry is designed for predictable engagement with Salice hinge arms in common cabinet constructions.

Using This Salice Hinge Mounting Plate On Jobs

Where This Hinge Mounting Plate Fits Best

This Salice hinge mounting plate is identified as a Domi 2-cam adjustable wing mounting plate, which positions it for cabinet doors using compatible Salice hinges that need fine post-install alignment. Its role as a hinge mounting plate in the hinges and hinge base plates category means it connects the cabinet side to Salice hinge arms for series 100, 200, 400, F, M, universal hinges, and Silentia, so one plate can serve multiple hinge series in the same shop. The 0mm plate height keeps the door position near the reference drilling plane, which is useful when following Salice boring layouts across multiple cabinets. Because the plate is constructed of stamped steel or die-cast steel with nickel plating to resist corrosion, it suits cabinetry located in kitchens, baths, or workrooms where metal components see regular use and contact with ambient humidity.

How Adjustment Range Supports Repeatable Results

The two cam adjustable design provides cam height adjustment of plus or minus 2 mm, letting installers raise or lower the mounted door relative to the cabinet without moving the base plate, which saves time during final fit. The same two cam system also provides cam depth adjustment from -0.5 mm to +2.8 mm, so the door can be brought closer to or farther from the cabinet face to correct for minor drilling or carcass variations. Having separate height and depth cams on a single hinge mounting plate helps installers achieve consistent reveals and flush fronts across a full run of cabinets while using standard drill setups. The cabinet side fastening method using pre-mounted Euro screws means the base plate location is fixed once installed, and all subsequent adjustments happen through the cams, which reduces rework and preserves the cabinet material. When used with series 100, 200, 400, F, M, universal, and Silentia hinges, this adjustment capability lets one mounting plate support different hinge models while maintaining a familiar adjustment workflow. The lifetime warranty tied to this Salice America mounting plate supports long-term cabinet installations where repeated adjustments may occur over the life of the project.

Common Questions About This Salice Mounting Plate

Selecting This Plate For Salice Hinge Runs

Choose the Domi 2-cam adjustable wing mounting plate when a Salice hinge mounting plate with defined cam ranges and 0mm height fits your cabinet layout. Its compatibility with series 100, 200, 400, F, M, universal, and Silentia hinges supports standardized hardware across projects. The stamped or die-cast steel body with nickel plating, combined with cabinet side fastening using pre-mounted Euro screws, suits professional shops that value fast mounting and durable adjustment. Ordering by BARGL09F/16 through Wurth Baer Supply helps keep this specific hinge mounting plate consistent across jobs and reorders.