Domi Cam Mounting Plate For Precise Door Setup
Domi Cam Adjustable Wing Mounting Plate is a hinge mounting plate for cabinet doors that ties Salice hinges solidly to the cabinet side while giving you precise cam-based adjustment. This hinge mounting plate is constructed of stamped steel or die-cast steel with nickel plating, so it provides a stable base and resists corrosion in typical cabinet environments. The two cam adjustable design delivers cam height adjustment of plus or minus 2 mm and cam depth adjustment of -0.5 mm to +2.8 mm, so you can fine tune door position in both directions after the hinge is installed. The cabinet side fastening method uses pre-mounted Euro screws, which speeds installation on system-drilled casework and keeps positioning consistent across multiple cabinets. As a Salice America hinge mounting plate in the hinge base plates class, it is built to work as part of a complete Salice hinge solution and is backed by a lifetime warranty.
Key Mounting Plate Details For Daily Work
- This hinge mounting plate is constructed of stamped steel or die-cast steel with nickel plating, providing a rigid interface that holds hinge alignment and resists corrosion over long-term cabinet use.
- Two cam adjustment provides cam height adjustment of plus or minus 2 mm and cam depth adjustment of -0.5 mm to +2.8 mm, letting you move doors in small controlled steps to correct reveals and flushness.
- The cabinet side fastening method uses pre-mounted Euro screws, so the plate locates quickly in 32 mm system holes and speeds repetitive installations on production cabinet runs.
- This hinge mounting plate is designed for series 100, 200, 400, F, M, universal hinges, and Silentia+, covering a wide range of Salice hinge lines with one part in the shop.
- A lifetime warranty supports this Salice America mounting plate, giving long-term backing on a component that sits at the core of every hinge installation.
Salice Hinge Mounting Plate Fit And Setup
This Salice hinge mounting plate works as the base connection between the cabinet side and Salice hinges, so the stamped or die-cast steel body and nickel plating keep the hinge anchored and stable as doors are opened repeatedly. The 6 mm Euro screw design ties directly into system-drilled holes, which helps maintain consistent hinge placement from cabinet to cabinet when you follow a 32 mm layout. Because the plate offers cam height adjustment of plus or minus 2 mm, you gain vertical movement at the mounting point instead of slotting screws, which keeps the plate locked in position after adjustment. The cam depth range from -0.5 mm to +2.8 mm lets you shift the door in and out at the plate, helping align the door face with adjacent fronts or trim without re-drilling.
Using This Plate In Salice Hinge Projects
Where This BARGR69/16 Hinge Plate Is Applied
The BARGR69/16 hinge mounting plate is used on cabinet sides as part of hinges in the series 100, 200, 400, F, M, universal hinges, and Silentia+ families, so one plate can support many door styles built around Salice hardware. Because it is classified as a hinge mounting plate within hinge base plates, the part is sized and formed specifically to pair with corresponding Salice hinge arms instead of acting as a general-purpose bracket. The 6 mm Euro screw format means this plate suits cabinet construction that follows a Euro-style drilling pattern, allowing direct installation into pre-bored holes. Nickel plating on the stamped or die-cast steel base also helps the plate hold up in interior cabinet spaces where humidity changes are common, so door alignment work done at install is supported over time.
Why Two Cam Adjustment Supports Clean Results
The two cam adjustable design on this Salice hinge mounting plate gives you dedicated height and depth control at the plate, so you do not rely solely on hinge-arm slotted holes to correct door position. With cam height adjustment of plus or minus 2 mm, you can raise or lower the door relative to the cabinet quickly, which speeds lining up multiple fronts on tall pantry runs or banks of drawers. Cam depth adjustment from -0.5 mm to +2.8 mm changes how far the door sits relative to the cabinet face, helping flush door faces with face frames or neighboring panels without moving the cabinet. Because these adjustments are built into the cams on the plate, the settings are repeatable and less prone to drift than ad hoc slotting, which supports fewer callbacks for alignment complaints. Using this hinge mounting plate with the specified Salice hinges keeps the adjustment range at the plate coordinated with the hinge arm geometry, helping the whole hinge system work as intended.
Common Questions About This Salice Mounting Plate
What type of product is the Domi Cam Adjustable Wing Mounting Plate?
The Domi Cam Adjustable Wing Mounting Plate is a hinge mounting plate in the hinge base plates class, so it serves as the cabinet-side base for Salice hinges on doors.
How does the two cam adjustment help cabinet door alignment?
The two cam adjustment on this mounting plate provides height and depth movement, so you can shift doors up, down, in, or out at the plate to tighten reveals and achieve flush faces.
What adjustment range does this hinge mounting plate provide?
This hinge mounting plate offers cam height adjustment of plus or minus 2 mm and cam depth adjustment of -0.5 mm to +2.8 mm, giving fine control to correct alignment without re-drilling.
Which Salice hinge series work with this mounting plate?
This Salice America mounting plate is for series 100, 200, 400, F, M, universal hinges, and Silentia+, so it supports many Salice hinge programs with a single part number.
How is the mounting plate fastened to the cabinet side?
The mounting plate uses pre-mounted Euro screws on the cabinet side, so it seats directly into Euro system holes and speeds repeatable positioning on casework.
What does the nickel-plated steel construction contribute in use?
The stamped or die-cast steel body with nickel plating provides strength for the hinge interface and resists corrosion, helping the door alignment remain stable over extended service.
Select This Plate For Euro-Style Salice Hinges
The Domi Cam Adjustable Wing Mounting Plate from Salice America combines 6 mm Euro screw fastening with two cam height and depth adjustment, so it fits smoothly into system-drilled cabinet work while still giving the tuning range needed for clean reveals. With coverage for series 100, 200, 400, F, M, universal hinges, and Silentia+, plus nickel-plated stamped or die-cast steel construction and a lifetime warranty, this BARGR69/16 hinge base plate is suited to shops standardizing on Salice hinges. Put this hinge mounting plate to work wherever you want Euro-style drilling, adjustable doors, and a single Salice plate solution across many hinge lines.
