Domi Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 0mm

Domi Cam Adjustable Wing Mounting Plate Use

Domi Cam Adjustable Wing Mounting Plate is a Salice America hinge mounting plate designed to support precise door alignment on cabinet installations. This hinge mounting plate belongs to the hinge mounting plates class, so it works as the interface between the cabinet and the hinge arm during construction or retrofit work. The 0mm plate height keeps the door position aligned with the design layout when a zero-offset base plate is required for the job. Nickel-plated stamped steel or die-cast steel construction resists corrosion, which helps the plate stay functional in typical cabinet environments over years of use. The plate uses a screw-on fastening approach, so it fixes solidly to the cabinet side. Because it is identified as a Domi cam adjustable wing mounting plate, it supports installers who want a repeatable adjustment method across multiple Salice hinge series.

Key Mounting Plate Details For Cabinet Work

• This Salice America hinge mounting plate is part of the hinge mounting plates product class, so it provides a stable base for hinging cabinet doors where a dedicated plate is required between the carcass and hinge arm.
• The mounting plate is constructed of stamped steel or die-cast steel with nickel plating, which helps the component resist corrosion and maintain smooth adjustment in normal woodworking and cabinet shop environments.
• The plate uses a 0mm height, so it holds the hinge arm at a zero-offset position relative to the cabinet side, which is useful when a flush or planned overlay position depends on a flat mounting reference.
• Two cam adjustment is built into the plate, providing cam height adjustment of plus or minus 2 mm and cam depth adjustment from -0.5 mm to +2.8 mm, allowing controlled fine-tuning of door reveal and in-out positioning after installation.
• The cabinet side fastening method uses pre-mounted Euro screws, which speeds mounting on cabinet sides drilled for Euro patterns and helps deliver consistent plate positioning from cabinet to cabinet.
• This hinge mounting plate is specified for series 100, 200, 400, F, M, universal hinges, and Silentia, so it serves as a common base when working across these Salice hinge families on a project.

Installation And Adjustment Details For Fit

This hinge mounting plate uses pre-mounted Euro screws as the cabinet side fastening method, so it fits directly into cabinet side panels prepared with Euro screw holes, saving layout time on repetitive casework. The 0mm height means the plate positions the hinge arm without additional lift from the cabinet surface, which is important when overlay or gap dimensions are built around a zero-height base plate. Two cam adjustment built into the plate delivers cam height adjustment of plus or minus 2 mm and cam depth adjustment from -0.5 mm to +2.8 mm, allowing the installer to tweak door gap and in-out position while the door is hanging. Because the plate is nickel-plated stamped steel or die-cast steel, the adjustment mechanism operates on a rigid, corrosion-resistant base that supports repeatable settings.

Using This Salice Hinge Mounting Plate On Projects

Where This Hinge Mounting Plate Is Applied

This hinge mounting plate is identified as a Domi cam adjustable wing mounting plate from Salice America, so it is intended for use wherever Salice hinge systems are specified in cabinet construction or remodeling. The plate is listed as a hinge mounting plate in the hinges and hinge base plates category, which means it is used on cabinet sides as the dedicated connection point for hinge arms. It is designed for series 100, 200, 400, F, M, universal hinges, and Silentia, so one plate style can be used across those hinge families in a shop or on site. The 0mm height supports layouts where the cabinet design expects the hinge to sit directly at the cabinet side level, helping maintain consistent reveals across a run of doors.

Why The Two Cam Adjustments Support Accuracy

The plate provides two cam adjustment, so installers have both cam height adjustment of plus or minus 2 mm and cam depth adjustment from -0.5 mm to +2.8 mm available on each hinge position. This dual adjustment function means door alignment can be refined both vertically and in depth after the hinges are mounted, which is valuable when working with long doors or banks of doors where reveals must line up visually. Because the plate body is made from stamped steel or die-cast steel with a nickel-plated finish, the cams operate against a solid, corrosion-resistant surface, which supports smooth adjustments over time. The use of pre-mounted Euro screws on the cabinet side fastening method fixes the plate consistently in the drilling pattern, so the cams handle fine corrections rather than gross repositioning work. Together, the 0mm height specification, dual cam ranges, and Euro screw mounting give installers control of overlay, gap, and in-out position while keeping the workflow centered on predictable hardware geometry.

Common Questions About This Hinge Mounting Plate

Selecting This Plate For Salice Hinge Layouts

The Domi Cam Adjustable Wing Mounting Plate from Salice America combines a 0mm height, two cam adjustment, and pre-mounted Euro screw fastening, so it fits projects built around Salice series 100, 200, 400, F, M, universal hinges, and Silentia. Using this nickel-plated stamped steel or die-cast steel plate on cabinet runs lets you work from a consistent base geometry while still having plus or minus 2 mm height and -0.5 mm to +2.8 mm depth cam adjustment on every hinge position. For cabinet shops and installers needing a hinge mounting plate that supports precise alignment across these Salice hinge families, this BARGR09/16 plate is set up for that role.