Domi Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 2mm

Domi Cam Adjustable Wing Mounting Plate Use

Domi Cam Adjustable Wing Mounting Plate is a hinge mounting plate designed for Salice cabinet hinges, so it provides the connection between the hinge arm and the cabinet side where accurate positioning matters. The plate is constructed of stamped steel or die-cast steel with nickel plating, which provides a solid metal base while resisting corrosion in typical cabinet environments. This mounting plate has a 2mm plate height, giving a defined starting point for overlay and reveal planning on doors. Two cam adjustment built into the plate delivers cam height adjustment of plus or minus 2 mm, helping fine-tune door alignment vertically. The same cam system also provides depth adjustment from -0.5 mm to +2.8 mm, which helps set the door flush with the cabinet front. The cabinet side fastening method uses pre-mounted Euro screws, speeding installation into Euro-drilled cabinet sides.

Adjustment And Material Details That Matter

• The two cam adjustable hinge mounting plate provides both height and depth adjustment, so hinge installers can tweak door position after mounting without redrilling or shifting the cabinet.
• Cam height adjustment of plus or minus 2 mm allows controlled vertical door movement, which helps correct door sag or misalignment relative to adjacent fronts.
• Cam depth adjustment from -0.5 mm to +2.8 mm lets the door move in and out relative to the cabinet, which supports clean reveals and flush door faces on fitted runs.
• Construction from stamped steel or die-cast steel with nickel plating provides a metal structure with a corrosion-resistant surface, which supports long-term use in typical kitchen or bath cabinet conditions.
• The cabinet side fastening method uses pre-mounted Euro screws, so plates can be driven directly into standard Euro system holes, saving layout time during production runs.
• This hinge mounting plate is covered by a lifetime warranty, which signals long-term support for the part in cabinet installations.

Salice Hinge Mounting Plate Installation Use

The Salice hinge mounting plate uses pre-mounted Euro screws on the cabinet side, so it is intended for cabinets drilled for Euro system screws and patterns. The 2mm plate height works as a known base thickness, which helps designers and installers size overlays and gaps across a run of doors. Two cam adjustment built into the plate lets the installer set height by plus or minus 2 mm after the hinge and door are hung, trimming out small drilling or construction variances. Depth adjustment from -0.5 mm to +2.8 mm is handled at the plate as well, allowing front alignment corrections without removing the door. By concentrating height and depth adjustment in the plate, this part supports repeatable hinge setups across series 100, 200, 400, F, M, universal, and Silentia+ hinges from Salice America.

Where This Hinge Mounting Plate Fits Work

Hinge Mounting Plate For Salice Series Hinges

This hinge mounting plate is specified as compatible with all Salice hinges, and is listed specifically for series 100, 200, 400, F, M, universal hinges, and Silentia+ hinges. That range covers many standard concealed hinge applications in cabinet production, so a shop using these Salice series can standardize on this plate style. The 2mm plate height gives a shared dimension across those installations, which helps when building door and frame programs around known hardware geometry. Because the plate is designed for Salice hinges, the hinge arm engages the plate as intended by the manufacturer, supporting proper function of opening, closing, and any integrated soft-close features in those hinge lines. Using the same plate type across several hinge series simplifies inventory and layout for cabinet runs built with Salice hardware.

Adjustment Range Supporting Consistent Door Results

The two cam adjustable hinge mounting plate delivers both cam height adjustment of plus or minus 2 mm and cam depth adjustment from -0.5 mm to +2.8 mm at the plate. Having these ranges on the plate itself means the installer can set final door position using a screwdriver at the cams instead of moving the cabinet or drilling new holes. Vertical tolerance can be corrected within the plus or minus 2 mm range to match door tops and bottoms in a bank. The depth range from -0.5 mm to +2.8 mm at the mounting plate helps pull doors in or out to sit correctly relative to the cabinet front. Because the plate is constructed of stamped steel or die-cast steel with nickel plating, these adjustments act on a stable, corrosion-resistant base, which supports maintaining those settings over time in normal cabinet use. In production shops, this adjustment flexibility on a Euro screw cabinet hinge plate reduces rework when small construction variations appear between boxes.

Common Questions About BARGR29/16 Mounting Plate

Selecting This Hinge Plate For Cabinet Runs

The Domi Cam Adjustable Wing Mounting Plate from Salice America provides a 2mm plate height, two cam adjustment, and pre-mounted Euro screw fastening, giving cabinet builders a predictable hinge base for Salice series 100, 200, 400, F, M, universal, and Silentia+ hinges. The stamped steel or die-cast steel construction with nickel plating supports performance in typical cabinet environments, and the lifetime warranty backs long-term use. For shops standardizing on Salice concealed hinges, this hinge mounting plate offers a consistent way to mount and adjust doors across many projects. Use this plate when a Salice hinge mounting plate with fine cam height and depth adjustment is needed on Euro-drilled cabinet sides.