Domi Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 3mm

Domi Cam Adjustable Mounting Plate For Salice Hinges

Domi Cam adjustable wing mounting plate is a hinge mounting plate from Salice America that supports precise mounting of compatible Salice hinges, so cabinet doors can be aligned accurately during installation or adjustment on the job. This hinge mounting plate is part of the hinge mounting plates product class, which means it provides the critical interface between the cabinet side and the hinge arm for Salice systems. The plate has a 3mm specification that defines the mounting height in the hinge stack, allowing installers to match the intended door positioning within a Salice layout. As a wing style mounting plate, it presents a broad bearing surface on the cabinet side, which helps distribute loads across the mounting area in typical cabinet constructions. The plate design works with the described Salice hinges to create an adjustable connection, so small corrections can be dialed in after doors are hung.

Key Mounting Plate Details That Support Work

• This two cam adjustable hinge mounting plate provides cam height adjustment of plus or minus 2 mm, so installers can shift the door position up or down to compensate for cabinet reveals and minor drilling tolerances.
• The same two cam system delivers cam depth adjustment from -0.5 mm to +2.8 mm, letting the hinge arm move closer to or farther from the cabinet side to fine-tune door overlay and close gaps between doors or against the case.
• The mounting plate is constructed of stamped steel or die-cast steel with nickel plating to resist corrosion, so it maintains its function and surface condition when used in typical cabinet and furniture environments.
• Cabinet side fastening uses pre-mounted Euro screws, which speeds installation in cabinets drilled for Euro system holes and provides a repeatable interface that aligns with industry-standard 32 mm cabinet construction.
• The hinge mounting plate carries a lifetime warranty, so installers and shops can rely on its continued performance as part of long-term cabinet assemblies in residential or commercial projects.
• The plate is described as compatible with all Salice hinges in the listed series, which enables a single mounting solution to be used across multiple hinge families in a shop that standardizes on Salice hardware.

Mounting And Adjustment Details For Installers

This Salice hinge mounting plate uses pre-mounted Euro screws on the cabinet side, so it fastens directly into Euro system holes drilled in cabinet sides during manufacturing, saving layout time on site. The 3mm mounting plate specification sets the base height for the hinge assembly, which defines how the door sits relative to the cabinet side when matched to Salice hinge data. Two cam height adjustment of plus or minus 2 mm lets installers shift the door vertically after mounting, which helps align multiple doors across a run of cabinets. Cam depth adjustment from -0.5 mm to +2.8 mm lets the hinge arm move in or out relative to the cabinet, so overlay and reveal can be tuned to the desired look and functional clearance.

Using This Hinge Mounting Plate In Cabinet Work

Where This Salice Mounting Plate Is Applied

This hinge mounting plate is identified for series 100, 200, 400, F, M, universal hinges, and Silentia+ from Salice America, so it fits into cabinet projects that use those specific Salice hinge lines. As a hinge base plate in the hinges and hinge base plates category, it serves wherever a cabinet side connection is needed between the case and a Salice hinge arm. The plate is described as compatible with all Salice hinges, which means it can be used in a shop that runs multiple Salice hinge models while keeping a consistent mounting interface on cabinet sides. The Domi Cam adjustable wing mounting plate functions within Salice hinge systems in both standard and Silentia+ applications, so soft-close or conventional variants in these series share the same mounting solution at the cabinet side.

Why Its Two Cam Adjustments Help Alignment

The two cam adjustment system on this mounting plate provides separate cam height and cam depth control, so installers can correct for drilling variances and casework irregularities without re-drilling hinge holes. With cam height adjustment of plus or minus 2 mm, the door can be nudged up or down to align with adjacent fronts, which is especially useful when multiple doors share a common reveal line. The depth adjustment range from -0.5 mm to +2.8 mm allows the hinge arm to shift in relation to the cabinet side, supporting fine overlay changes and helping doors sit flush in face or frameless cabinet designs. Because the mounting plate is constructed of stamped steel or die-cast steel with nickel plating to resist corrosion, these adjustments remain repeatable under normal cabinet service conditions, supporting consistent results over the life of the installation. Using one hinge mounting plate for series 100, 200, 400, F, M, universal hinges, and Silentia+ also simplifies setup in production, because the same adjustment approach applies across these Salice hinge lines.

Common Questions About This Salice Mounting Plate

Selecting This Plate For Salice Hinge Projects

The Domi Cam adjustable wing mounting plate with 3mm specification and pre-mounted Euro screws lets Salice hinge users combine a consistent base height with field-adjustable cams, so door alignment can be controlled rather than improvised. Its construction of stamped steel or die-cast steel with nickel plating to resist corrosion provides a durable mounting point within cabinet cases, supporting the performance of series 100, 200, 400, F, M, universal hinges, and Silentia+. For shops standardizing on these Salice hinge lines, choosing this hinge mounting plate creates a unified mounting and adjustment approach across projects.