Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice Domi cross mounting plate defines the connection point between a cabinet and a compatible hinge, creating a fixed reference that controls how the hinge sits on the case. As a hinge mounting plate, it supports hinge installation by providing a stable base where the hinge arm locks in. This Salice America part is identified as BARGR09/20, so it can be matched directly to drawings or existing hardware. The plate is part of the Domi line of hinge mounting plates, aligning with jobs that are already using Salice Domi components. Being grouped under hinges and hinge base plates, it fits typical cabinet and casework layouts where a separate plate is needed to fasten the hinge to the cabinet side.
The 0mm height stated for this hinge base plate keeps the mounting interface as neutral as possible, which matters when door fit was set up around a 0mm reference. The mention of Euro screw in the web description indicates the plate is intended for installation into Euro-style system holes, tying directly into cabinet sides bored on a standard boring pattern. As a hinge mounting plate in the hinges category, it supports the transition between the cabinet side and the hinge arm so the hinge can operate from a solid, repeatable mounting point.
This Salice Domi cross mounting plate with Euro screw and 0mm height aligns with cabinet and casework that use Salice Domi hinge technology. Because the SAP description identifies it as DOMI SNAP CROSS MPL W/EURO SCREW,0MM, it ties directly into applications calling out that configuration. The hinge mounting plate classification points to its role on the cabinet side, where the plate is fastened to the case and the hinge engages the plate. Within the hinges and hinge base plates category, it fits work where the cabinet is already drilled for system holes and the designer specified a separate base plate rather than a direct-screw hinge. The 0mm height detail supports layouts where door position is calculated from a zero-height plate, which is common in many standard overlay and inset configurations that rely on a flat mounting reference.
The 0mm height on the Salice Domi cross mounting plate with Euro screw, 0mm height helps installers maintain consistent door alignment across multiple openings because all hinges share the same baseline. When a run of cabinets is bored for Euro-style holes, using a mounting plate described specifically with Euro screw keeps the plate aligned to that boring system. The fact that it is a cross mounting plate gives the hinge a defined platform, which supports predictable alignment when repeating the same drilling pattern. The Salice America designation and BARGR09/20 part number help shops tie the physical part back to drawings, parts lists, or software outputs, reducing confusion when matching hinges and plates from the Domi line. As a hinge mounting plate, it centralizes the hinge connection onto a known component, which can simplify replacement or adjustment by focusing work on a single reference piece on the case side.
The Salice BARGR09/20 part is a Domi cross mounting plate for hinges, so it acts as the base on the cabinet where a compatible hinge arm attaches.
The 0mm height means the hinge arm sits at the cabinet reference level, which supports layouts that are calculated around a zero-height plate for door position.
The Euro screw detail indicates the plate is intended for Euro-style system holes, so it works with cabinet sides bored on a standard system layout.
Within the Salice Domi system, this cross mounting plate provides the fixed base that a compatible hinge connects to on the cabinet.
Being a hinge mounting plate means it is intended to sit on the cabinet side and receive the hinge, centralizing door movement around this component.
The Salice America brand reference links the plate to Salice hinge systems, supporting projects that standardize on that manufacturer for cabinet hardware.
The Salice Domi cross mounting plate with Euro screw, 0mm height is suited to cabinet work that relies on Salice Domi hinges and Euro-style system boring. Its 0mm height and hinge mounting plate design support consistent door positioning based on a neutral reference. When projects specify Salice America Domi components by part number, BARGR09/20 provides a direct match for the mounting plate, helping keep hinge and base selections aligned across the job.
Sold In: 300 Each