Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 14 inch side-mount ball bearing drawer slide from GSlide's G-Slide series, built with 1 inch of over-travel and a hold-in anti-rebound detent so the drawer reaches past the cabinet face and stays shut once closed.
Most drawers under a standard countertop open to the cabinet face and stop. When the worktop overhangs, or when the face frame is deeper than usual, a full-extension slide gets the drawer close but not all the way clear. The G-Slide's 1 inch of over-travel pushes past that stopping point, so contents at the rear of a shallow shop drawer, an in-cabinet tray, or a utility pull-out sitting under a desk overhang are fully reachable without reaching blind. At 14 inches, this slide suits compact drawers — base cabinet pull-outs, workbench accessory trays, and built-in desk drawers — where the overhang problem shows up most on shorter runs.
Cold-formed steel members run on ball bearings seated in full-length raceways. Zinc plating is the segment's standard protective finish for indoor installations — functional, durable, and unobtrusive against the cabinet interior. This is not a decorative or stainless finish; it suits dry, indoor environments and handles routine shop and office conditions without issue.
The G-Slide over-travel slide is a practical choice for woodworkers, cabinet shops, and contractors fitting compact drawers in tight spaces where an overhang or a thick face frame would otherwise block full access. The 90 lb per pair rating is well within the standard duty class — right for loaded utility drawers, shop trays, and medium-weight storage. Shops running higher loads should step up to the 150 lb or 200 lb class options. Each slide mounts to the drawer side and cabinet interior with 1/2 inch of side clearance per side; build the drawer box 1 inch narrower than the cabinet opening. In face-frame cabinets, rear mounting brackets are needed to support the back of the slide — those are sold separately and are series-specific.
No. Fourteen inches is the closed length of the slide. Because this is an over-travel slide, the drawer member travels the full slide length plus 1 additional inch past it — so the drawer clears a standard overhang and the full interior is accessible.
It is a mechanical catch that keeps the drawer in the closed position after you push it shut. There is no spring pulling the drawer closed and no damper slowing it — the detent simply stops the drawer from bouncing back open when shut firmly. Pull the drawer normally to release it.
No. The G-Slide over-travel slide has no damper. The hold-in anti-rebound feature keeps the drawer closed once shut, but the closing action is not slowed or cushioned. For damped soft-close closing, look at the soft-close variants in this family.
No. The slide is non-handed — both pieces in the pair are identical and fit either side of the drawer, so there is nothing to sort or match at installation.
Side-mount slides need support at the rear in face-frame construction because the cabinet side is set back from the frame. Rear mounting brackets are required and are sold separately; make sure the brackets you order are compatible with the G-Slide series.
Fourteen inches of slide length, 1 inch past full extension, and a stay-closed detent — the G-Slide over-travel slide solves the overhang access problem on compact drawers without adding complexity to the install.
Sold In: 10 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GY4340RB Mfr# GS4340 RB | GSlide Rear Mounting Bracket, GS4340 RB |
