GSlide 10-Pair Box 24" Hold-In/Anti-Rebound Side Mount Over-Travel 90 lb Ball Bearing Drawer Slide, Zinc, GS4205 24

Over-Travel Ball Bearing Slide For Drawers Behind Deep Overhangs

This is a 24 inch side-mount ball bearing drawer slide from the GSlide G-Slide series, built with 1 inch of over-travel past full extension and a hold-in anti-rebound detent that keeps the drawer from bouncing back open. Rated 90 lb per pair, it handles the kitchen utility drawer, shop bench pull-out, or any installation where a standard full-extension slide falls just short of giving you the access you need.

Key Features

• 1 inch over-travel past full extension — the drawer clears a countertop overhang or deep face frame so the full interior is reachable.
• Hold-in anti-rebound detent — a mechanical catch keeps the drawer firmly closed and stops it from bouncing back open after a firm push.
• 90 lb weight rating per pair — carries a loaded kitchen or shop drawer through daily use.
• Steel ball bearings in full-length raceways — smooth, consistent travel under load across the full range of motion.
• Non-handed design — both slides in the pair are identical, fitting either side without sorting on the bench.
• Zinc finish on cold-formed steel — standard indoor corrosion protection for a side-mount slide that lives beside the drawer box.

Where the Extra Inch Makes the Difference

A plain full-extension slide brings a drawer out to the cabinet face — but when a countertop lip, a thick face frame, or an appliance garage sits in the way, the back of the drawer stays out of reach. The G-Slide's 1 inch over-travel pushes the drawer past the cabinet opening so the rear contents are genuinely accessible, not just technically unobstructed. That extra inch also matters on 24 inch deep drawers under standard kitchen countertops, where the overhang is exactly the obstacle a full-extension slide cannot clear. It is also a practical choice for bench drawers in a shop where a tool tray needs to come all the way out without the user reaching around a frame rail.

Construction and Finish

The slide is cold-formed steel with a zinc finish — the working standard for side-mount ball bearing slides in indoor cabinetry. Zinc provides reliable corrosion resistance for a dry interior environment. The hold-in anti-rebound detent is a mechanical feature built into the slide members: it is not a spring-close and not a damper. The drawer stays wherever it is put — open or fully closed — until intentionally moved. The 1/2 inch side clearance requirement per side is the same as every other slide in this segment, so the G-Slide drops into an existing drawer-box layout without reworking the box width.

Who Reaches for This Slide

Cabinet shops specifying drawers under standard countertops with tile or stone overhangs will find the 1 inch over-travel closes the gap that a full-extension slide leaves behind. Contractors replacing slides in an existing face-frame kitchen — where the frame itself eats into usable travel — can use this slide to restore full rear access without rebuilding the cabinet. Homeowners and designers working on handle-less kitchens with thick slab fronts that extend past the counter will also benefit: the drawer front can project further and the box still clears the opening completely. This slide sells as a pair, non-handed, so one SKU covers both sides of the drawer.

Full Access Where Standard Slides Fall Short

When the cabinet opening and the countertop overhang conspire to keep the back of the drawer out of reach, the 1 inch over-travel on the G-Slide resolves the problem without a cabinet rebuild — the right slide for the job, ordered as a pair and installed the same day.