GSlide 10-Pair Box 26" Hold-In/Anti-Rebound Side Mount Over-Travel 90 lb Ball Bearing Drawer Slide, Zinc, GS4205 26

Over-Travel Ball Bearing Drawer Slide That Stays Closed When You Need It

This 26 inch GSlide G-Slide series over-travel ball bearing drawer slide is built for drawers that need to clear a countertop overhang or deep face frame and then stay put. The slide extends 1 inch past full travel, and a hold-in anti-rebound detent keeps the drawer from bouncing back open after it is shut. Sold as a pair, zinc-finished steel, side mount, non-handed.

Key Features

• 1 inch over-travel carries the drawer past the cabinet face, clearing countertop overhangs so the rear contents are fully reachable.
• Hold-in anti-rebound detent keeps the drawer closed once pushed shut, stopping it from rebounding back open.
• 90 lb weight capacity per pair handles a loaded utility or kitchen drawer without strain.
• Steel ball bearing construction delivers smooth, consistent travel across the full slide length.
• Non-handed design means both slides in the pair are identical, with no left/right sorting required at installation.
• Zinc finish provides standard indoor corrosion protection on steel members.

Where the Extra Inch Makes the Difference

A standard full-extension slide stops at the cabinet face. With 1 inch of over-travel, this slide carries the drawer front past the face, so the back of a 26 inch drawer is reachable even when a countertop overhang or thick face frame would otherwise block access. That extra inch is the detail that separates a frustrating reach from a clean pull-out. The hold-in detent works in the other direction: once the drawer is pushed shut, it stays there. No drift, no rebound after a firm close. This combination of over-travel opening and stay-closed closing suits worktop drawers, shop benches, and any run of cabinets where the drawer sits below an overhang.

Steel and Zinc Built for Daily Use

The slide members are cold-formed steel with a zinc finish, the standard pairing for side-mount ball bearing slides in indoor cabinet and shop applications. Zinc plating protects the steel through years of dry, indoor service. The ball bearings run in full-length raceways for smooth, even travel whether the drawer carries a light load or approaches the 90 lb capacity. This is not a decorative or stainless finish; it is a functional, durable coating suited to the work environment a 26 inch shop or kitchen drawer lives in.

The Right Fit for Overhang and Bench Drawer Applications

Choose this slide when two conditions are both true: the drawer opens under something (a countertop, a face frame overhang, a workbench top) and the drawer must not creep back open on its own. Woodworking shops, utility rooms, and kitchens with deep upper-cabinet overhangs are the natural home for this combination. The 1/2 inch side clearance per side is standard for this mount position, so drawer boxes built for any comparable side-mount ball bearing slide will fit without modification. In face-frame cabinets, rear mounting brackets are required to support the back of the slide; those brackets are sold separately and are series-specific.

A Working Slide for Drawers That Live Under an Overhang

The GSlide G-Slide 26 inch over-travel slide solves the two problems that come with overhang drawers at once: the extra inch of travel clears the obstruction on the way out, and the hold-in detent keeps the drawer exactly where you put it on the way in.