Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is an 18 inch over-travel side-mount ball bearing drawer slide from GSlide's G-Slide series, rated 90 lb per pair, with 1 inch of travel beyond full extension and a hold-in anti-rebound detent that keeps the drawer firmly closed until pulled.
Most drawers under a countertop overhang or behind a deep face frame hit a practical limit before the contents are fully reachable. The extra inch of travel on this slide pushes the drawer box past the nominal slide length, so the rear of the drawer clears the overhang instead of hiding behind it. That makes it a natural fit for kitchen base cabinets with thick stone tops, workshop benches with overhanging work surfaces, and frameless utility cabinets where the case sides cut into usable reach. The hold-in detent adds value in the same environments: a shop drawer full of router bits or a kitchen drawer loaded with utensils stays put when shut, even when the cabinet takes a bump.
The G-Slide over-travel slide is built from cold-formed steel with a zinc electroplate finish. Zinc is the working standard for side-mount ball bearing slides in cabinet and shop applications — it protects the steel members through everyday indoor use and keeps the profile clean against a painted or melamine interior. This is not a decorative or stainless finish; it is a functional, durable coating suited to dry indoor environments.
This slide is the right call when a standard full-extension slide technically fits the cabinet but leaves the rear contents just out of reach. Cabinet shops building under worktop drawers, contractors installing base cabinetry under thick countertops, and shop owners building tool storage beneath bench overhangs will all recognize the problem this slide solves. The 90 lb per pair rating covers the majority of kitchen and utility drawer loads; for applications above that threshold, step up to a higher-rated over-travel slide. This is a standard-clearance side-mount: build the drawer box 1 inch narrower than the cabinet opening to leave 1/2 inch of clearance per side, and add series-matched rear mounting brackets if the install is in a face-frame cabinet.
The over-travel stroke extends 1 inch beyond the slide's 18 inch nominal length. A plain full-extension slide stops at roughly the cabinet face; this one pushes the drawer 1 inch past it.
No. The hold-in anti-rebound detent is a mechanical catch that holds the drawer closed and prevents it from bouncing back open after a firm push. There is no damper and no spring — the drawer does not slow down near the end of travel, and it does not pull itself shut. Soft-close is a separate, damped mechanism not present on this slide.
No. The G-Slide over-travel slide is non-handed, so both slides in the pair are identical. Order the quantity your drawer count requires without sorting left from right.
Side-mount slides in face-frame cabinets need support at the rear because the cabinet side is set back from the face frame. Add series-matched rear mounting brackets, sold separately, to carry the back end of the slide. These brackets are series-specific and do not interchange across brands.
Verify the sold-as unit at checkout — confirm whether this SKU ships as a pair or as a single slide before ordering.
When a standard slide leaves the back of a loaded drawer just out of reach, the G-Slide over-travel delivers the clearance and the staying power to keep the job moving.
Sold In: 10 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GY4340RB Mfr# GS4340 RB | GSlide Rear Mounting Bracket, GS4340 RB |
