Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 100 hinge brings Silentia soft-close and Rapido expanding-dowel mounting to full overlay doors on both face-frame and frameless cabinets, finished in nickel.
Full overlay is the configuration where a single door covers almost the entire visible face of the cabinet side, keeping partition gaps tight and the overall run looking clean. This hinge is built for that layout. The 35mm cup seats in the door, and the straight arm connects to a Salice base plate mounted to the cabinet. That plate is sold separately and should be matched to a Salice-compatible plate for this series. Because overlay comes from the arm cranking together with the plate, the plate selection locks in the final door position.
The Silentia damper is integrated into the hinge body, so there is no separate add-on to install or align. It slows the door over the last arc of travel before it meets the cabinet face, which protects both the door edge and the finish on adjacent doors in a run.
The hinge is steel with a nickel finish. Nickel reads as a warm, slightly muted silver that pairs naturally with brushed nickel pulls, stainless appliances, and light-toned hardware programs. It sits between the brightness of chrome and the softness of satin brass, which makes it a dependable neutral across a wide range of kitchen and bath palettes. The expanding-dowel cup attachment adds mechanical rigidity at the door bore, keeping the hinge seated firmly through years of daily cycling.
This hinge covers face-frame and frameless cabinets in a single part, which matters on mixed-construction projects and in shops that want to carry one concealed hinge across different build styles. The 45mm boring pattern is the standard spacing found on most production boring machines, so it slots into existing tooling without adjustment. Door thickness should run in the standard 16 to 22mm range. For doors outside that window, a thick-door or thin-door hinge is the correct pick. Designers specifying a complete hardware program and cabinet shops running volume both benefit from the consistent Nickel finish across a full run of doors.
No. The hinge clips to a base plate that mounts to the cabinet, and that plate is sold separately. Use a Salice plate matched to this series. Plates are brand-specific, so plates from other manufacturers will not connect to this hinge.
Rapido uses expanding dowels that press into pre-bored holes in the door rather than relying on cup screws. The dowels expand mechanically to grip the bore, giving a firm, screw-free attachment at the door side of the hinge.
Yes. The 105 degree swing gives comfortable access to cabinet contents in most kitchen, bath, and casework applications. It is the designed opening angle for this series geometry.
The right count depends on door height, width, and weight. As a general guide, doors up to about 40 inches tall typically use two hinges and taller doors use three or more. Confirm the exact count against the Salice load table for your door dimensions.
Specify this hinge when the job calls for full overlay doors that close without noise, in a nickel finish that holds its look alongside the rest of the hardware program.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 3000 Each |  UBS2XX85H9 Mfr# S2XX85H9 | Flange Cover Cap, Nickel | ||||
Sold in: 1 Each |  UBS2XX86BT Mfr# S2XX86BT | Silentia Hinge Spacers 0.6mm Height For Silentia 110 Deg Hinges | ||||
Sold in: 1 Each |  UBS2XX86AT Mfr# S2XX86AT | 1.2mm Spacer for Silentia Series Hinges | ||||
Sold in: 1 Each |  UBS2XX86KT Mfr# S2XX86KT | Silentia Hinge Spacers 1.8mm Height For Silentia 110 Deg Hinges | ||||
Sold in: 1 Each |  UBD1A6ACGSN Mfr# D9A6AC3SN | Silentia Hinge Cup Depth Gauge 12 mm | ||||
Sold in: 1 Each |  UBD2ABACGSN Mfr# D2ABACGSN | Silentia Hinge Cup Depth Gauge 15.5 mm | ||||
Sold in: 1 Each |  UBS1E637XY Mfr# S1E637XY | Salice Series 100 & 700 Hinge Stop Device S1E637XY |
