Pro Value Series 10" 3/4 Extension Self-Close Epoxy Coated Euro Slides PRO 50 Series, Unhanded Side Mount White - 4000-10-1WT

Pro Value Series 10 Inch Epoxy Drawer Slide

Pro Value Series 10 inch epoxy drawer slide is a side mount drawer slide that supports drawers in cabinet projects where a 10 inch length is required, so it suits shorter drawers in kitchen, bath, or shop storage layouts. The slide is part of Baer Supply's PRO50 epoxy coated 75 lb rated slides, which means each pair is tested to carry up to 75 pounds, supporting drawers loaded with tools, parts, or household items without overloading the slide. The drawer slide has 3/4 extension travel, so the drawer opens far enough for good access while keeping some engagement in the slide for stability during use. A self closing action at the end of travel pulls the drawer shut, which helps keep drawers closed in everyday use. The slide is epoxy coated in white, providing a finished appearance that blends with typical white cabinet interiors.

Key PRO50 Euro Slide Details For Daily Use

• Baer Supply's PRO50 epoxy coated 75 lb rated slides are ANSI/BIFMA tested/approved to Grade 1 requirements, so the load rating and performance have been verified against recognized standards for repeated use.
• The slide uses a quiet wheel premium epoxy design with a polymer wheel, giving a lifetime of quiet, trouble-free performance that reduces noise and rolling resistance when drawers are opened and closed.
• This model is an unhanded side mount slide, allowing either left or right installation from the same part and simplifying stocking and layout when setting up multiple cabinet bays.
• The 10 inch length and 1/2 inch plus or minus 1/32 inch clearance on each side define the drawer and opening sizing, which helps lay out box widths accurately for smooth sliding action.
• Height of 1-1/2 inch and material thickness of 1.2 mm cold rolled steel provide a compact but solid profile, so the slide fits common cabinet clearances while using steel construction for strength.

Side Mount Epoxy Slide Fit And Mounting Details

This side mount drawer slide is designed as a Euro style slide that works perfectly in face-frame and European applications, so it supports both framed and frameless cabinet construction in the same shop. The cabinet member has 32 mm mounting holes, aligning with the 32 mm system used on many cabinet cases, which speeds layout when drilling line-bored holes or using system hardware. The drawer member offers both bottom and side mounting holes, giving flexibility in how the slide is fastened to the drawer box so installers can adapt to existing construction. Mounting space of 1/2 inch plus or minus 1/32 inch clearance each side sets a clear requirement for the gap between drawer and cabinet sides, which helps reduce binding and keeps the drawer running smoothly.

Using This 10 Inch PRO50 Euro Slide On Projects

Where This Side Mount Euro Slide Fits Best

This Pro Value Series side mount drawer slide is categorized as a side mount drawer slide in the epoxy coated Euro slide class, so it is intended for drawer systems that use Euro style side mounting rather than under-mount hardware. With a 10 inch length, it suits shallow drawers such as upper kitchen drawers, vanity drawers, or smaller shop drawers where full-depth storage is not required. Because it works perfectly in face-frame and European applications, the same slide can support projects across traditional framed cabinets and frameless casework, which helps keep hardware consistent across a job. The white epoxy coated finish matches white interiors commonly used in residential and commercial cabinets, which keeps hardware visually unobtrusive when drawers are opened.

Details That Support Smooth Action And Repeatable Results

The 3/4 extension travel on this slide allows most of the drawer box to clear the cabinet front while still leaving some slide engagement, which promotes stability under load and reduces side play at full opening. The self closing action and positive stop work together so the drawer is pulled fully closed and then stopped at the front, which helps align fronts consistently and reduces the chance of drawers drifting open. A single captive design keeps the drawer member engaged with the cabinet member during operation, which supports smooth tracking and reduces the risk of the drawer lifting off the slide in normal use. The polymer wheel provides a lifetime of quiet, trouble-free performance, which matters in kitchens, offices, or shops where frequent drawer use can otherwise generate noise. Epoxy coated 1.2 mm cold rolled steel construction combines a protective surface with a strong steel core, supporting the 75 lb rating while resisting wear on the sliding surfaces over time.

Common Questions About This PRO50 Epoxy Drawer Slide

Select This 10 Inch PRO50 Slide For Euro Drawers

The Pro Value Series 10 inch 3/4 extension self-close epoxy coated Euro slide provides a 75 lb rated, ANSI/BIFMA Grade 1 tested option for side mount drawer projects. The unhanded design, 32 mm mounting holes, and bottom and side mounting options support consistent layout across face-frame and European applications. The white epoxy coated 1.2 mm cold rolled steel construction with polymer wheel and quiet wheel premium epoxy slide design delivers smooth, quiet travel in everyday use. For projects calling for a 10 inch Euro style side mount drawer slide from Baer Supply's PRO50 epoxy coated line, this 4000-10-1WT model aligns with that requirement.