Pro Value Series 14" 3/4 Extension Self-Close Epoxy Coated Euro Slides PRO 50 Series, Unhanded Side Mount White - 4000-14-1WT
Description
Pro Value Series 14 Inch Drawer Slide Use
Pro Value Series 14 inch drawer slide is a side mount drawer slide that supports up to 75 lb, so it handles typical cabinet storage loads in kitchens, shops, and offices without overstressing the slide. The 3/4 extension slide travel lets the drawer open far enough for practical access to stored items while keeping the mechanism compact inside the cabinet. Self closing action pulls the drawer shut at the end of travel, which helps drawers seat consistently and reduces drawers sitting partially open. The quiet wheel premium epoxy slide design keeps operation smooth and low-noise, useful in residential and commercial settings where repeated openings are common. This PRO50 epoxy coated 14 inch slide uses cold rolled steel coated with epoxy in a white finish, so it combines steel strength with a coated surface that suits white cabinet interiors.
Key Slide Details That Support Daily Work
- PRO50 epoxy coated slides are rated at 75 lb, which supports typical drawer loads in cabinetry and shop storage without overloading the slide members.
- The quiet wheel premium epoxy slide uses a polymer wheel, providing a lifetime of quiet, trouble-free performance that reduces noise during repeated drawer use.
- This 14 inch length slide matches drawers designed for that nominal depth, helping installers align drawer and cabinet dimensions with standard carcass layouts.
- Single captive design keeps the drawer member engaged in the slide, which helps drawers track properly and reduces side-to-side play under load.
- Positive stop built into the slide defines the open position, which prevents the drawer from pulling past its designed travel during normal use.
- Lift out disconnect enables the drawer to be lifted off the slide, simplifying drawer removal when cabinets need interior access or service.
Mounting And Clearance Details For Fit
This unhanded side mount slide installs on either the left or right side, so one part number serves both sides of the drawer and simplifies layout. Mounting space of 1/2 inch plus 1/32 inch minus 0 inch clearance on each side gives a defined side gap, which helps builders size drawer boxes accurately for consistent fit in the opening. The slide height of 1-1/2 inch sets the vertical envelope along the drawer side, useful when coordinating with drawer bottom grooves or adjacent hardware. Material thickness of 1.2 mm cold rolled steel gives a rigid slide structure, supporting the 75 lb rating across the 14 inch length.
Where This Side Mount Epoxy Slide Excels
Use In Face-Frame And Euro Cabinet Designs
This PRO50 epoxy coated drawer slide works perfectly in face-frame and European applications, so it can be used across a mixed shop of cabinet styles using a single slide family. 32 mm mounting holes on the cabinet member line up with system drilling patterns, which speeds layout in frameless construction and supports use with line-boring equipment. Bottom and side mounting holes on the drawer member give options for fastening along the drawer side or bottom edge, helping installers match their preferred construction method. The unhanded design allows the same slide to be installed on either side, useful when pulling parts from stock in a busy shop without sorting left and right pieces.
Details That Support Smooth Repeatable Drawer Action
The 3/4 extension travel balances access and stability, so drawers open far enough for normal reach while keeping more slide member overlap for support under load. Self closing action at the end of travel brings the drawer fully closed, which helps fronts sit flush across a run of cabinets after every use. The polymer wheel is designed for a lifetime of quiet, trouble-free performance, reducing friction along the steel track and keeping motion smooth even after many cycles. The epoxy coated white finish covers the cold rolled steel members, providing a uniform surface that works cleanly with the polymer wheel and presents a clean appearance inside light-colored cabinet interiors.
Common Questions About PRO50 14 Inch Slides
What cabinet types can this PRO50 slide be used in?
This PRO50 epoxy coated drawer slide works perfectly in face-frame and European applications, so it suits both traditional framed cabinets and frameless system-built cabinets.
How much side clearance does this drawer slide require?
This drawer slide uses 1/2 inch plus 1/32 inch minus 0 inch clearance on each side, guiding drawer box width when sizing for a specific cabinet opening.
What is the load rating for this 14 inch drawer slide?
This PRO50 14 inch drawer slide is rated at 75 lb, so it supports typical residential and light commercial drawer loads within that capacity.
How far will the drawer extend with this slide?
This slide is a 3/4 extension design, so the drawer opens roughly three-quarters of its length for access while retaining overlap for support.
How does the self closing action help cabinet alignment?
The self closing action pulls the drawer closed at the end of travel, helping drawer fronts return to a consistent flush position across a bank of cabinets.
What role does the polymer wheel play in performance?
The polymer wheel in this slide delivers quiet, trouble-free performance over its life, reducing noise and friction each time the drawer is opened and closed.
Selecting This Slide For 14 Inch Drawers
This PRO50 epoxy coated 14 inch self close slide from Pro Value Series combines a 75 lb rating, 3/4 extension, and unhanded side mounting, giving cabinetmakers a single slide that fits standard 14 inch drawers. With 32 mm cabinet member mounting holes and options for bottom and side mounting on the drawer member, it aligns well with both system construction and traditional drawer building methods. For projects calling for white epoxy coated side mount drawer slides at this length, this model provides the key dimensions and functions needed for consistent drawer performance.
