Pro Value Series 22" 3/4 Extension Self-Close Epoxy Coated Euro Slides PRO 50 Series, Unhanded Side Mount White - 4000-22-1WT

Pro Value Series 22 Inch Epoxy Drawer Slide

Pro Value Series 22 inch epoxy drawer slide is a side mount drawer slide designed for cabinet builders who need predictable, repeatable performance. The slide is part of Baer Supply's PRO50 epoxy coated series, rated at 75 lb, so it supports typical residential or light commercial drawer loads without overbuilding the casework. The 3/4 extension travel gives access to stored items while keeping part of the drawer supported inside the cabinet, which helps the drawer run steadily under load. A self closing action pulls the drawer shut at the end of travel, helping drawers seat consistently in face-frame and European applications. The slide uses a quiet wheel epoxy design, so the moving parts run smoothly along the coated steel. An unhanded layout allows the same member to be used on either side, which simplifies layout and reduces sorting on the bench.

Key Slide Details For Real-World Cabinet Work

• The PRO50 epoxy coated design protects the 1.2 mm cold rolled steel members, so the slide resists corrosion and keeps a smooth running surface during normal shop, kitchen, or office use.
• A 75 lb rating means the slide is built to handle everyday drawer contents, so typical kitchen, bath, or office drawers can be loaded confidently without overspecifying heavier hardware.
• The 22 inch length matches common cabinet depths, which helps drawers align with standard carcass dimensions when laying out face-frame or frameless cabinet projects.
• Single captive construction keeps the drawer member engaged with the cabinet member, so drawers track consistently and are less prone to jumping the slide during use.
• Quiet polymer wheel construction supports a lifetime of quiet, trouble-free performance, so the rolling action stays smooth and reduces noise in finished installations.
• The epoxy coated white color presents a clean, neutral look inside cabinets, so the hardware blends with typical light interiors on utility and residential projects.

Side Mount Slide Fit, Space, And Mounting Pattern

This side mount drawer slide uses 1/2 inch plus 1/32 inch or minus 0 inch clearance on each side, so the cabinet opening can be sized accurately for consistent drawer fit. The slide stands 1-1/2 inches high, which matters when coordinating drawer box heights with openings and cross rails. Bottom and side mounting holes on the drawer member give options for how the slide is fastened to the box, supporting different shop preferences. On the cabinet member, 32 mm mounting holes provide a regular pattern that works smoothly with system drilling, so layout aligns with established European construction methods as well as face-frame builds that follow a consistent grid.

Using PRO50 Epoxy Coated Euro Slides In Practice

Where This 22 Inch Slide Fits Best

This PRO50 epoxy coated 22 inch slide is a side mount drawer slide suited to both face-frame and European cabinet applications, so it works across a wide range of shop standards. The 22 inch length pairs well with full-depth bases and utility cabinets, allowing drawers to use the interior space efficiently. With 1/2 inch side clearance and 1-1/2 inch slide height, cabinet and drawer dimensions can be planned so the slides sit properly on stretchers, nailers, or panel sides without interference. The white epoxy coated finish coordinates well with light-colored cabinet interiors, so the hardware does not visually dominate open drawers in kitchens, bathrooms, or office installations. As an unhanded slide, it can be used on either left or right, which simplifies stocking only one part for both sides of the drawer run.

Details That Support Repeatable Drawer Results

The self closing action on this slide helps drawers return consistently to the closed position, which supports clean reveals and aligned fronts across a bank of cabinets. A positive stop in the mechanism defines the end of travel, so drawers stop at the same point every time without relying on door or face adjustments. The lift out disconnect allows the drawer to be removed from the cabinet member when needed, which simplifies fitting, finishing, or later adjustments on site. The quiet polymer wheel running on epoxy coated 1.2 mm cold rolled steel creates a stable track, so the slide glides smoothly over time with less chance of metal-on-metal noise. ANSI/BIFMA Grade 1 testing and approval provide a performance benchmark, so shops can reference standardized test results when choosing hardware for demanding environments.

Common Questions About This PRO50 Drawer Slide

Selecting This Slide For Your Next Cabinet Run

The PRO50 epoxy coated 22 inch side mount drawer slide pairs a 75 lb rating with 3/4 extension, self closing action, and ANSI/BIFMA Grade 1 testing, so it fits well where consistent drawer performance matters. With 1/2 inch side clearance, 1-1/2 inch height, and 32 mm cabinet mounting holes, it integrates cleanly into both face-frame and European projects. The white epoxy coated finish, unhanded layout, and polymer wheel design support efficient shop workflow. Put this 4000-22-1WT slide to work wherever a practical, value-focused epoxy euro slide is the right choice.