Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series 24 inch epoxy drawer slide is a 3/4 extension self-close, epoxy coated Euro slide from the PRO 50 Series that supports up to 75 lb per pair, so it is suited to everyday drawers that carry moderate loads in cabinets. The unhanded side mount design installs on either side, which streamlines layout and stocking for shops handling multiple cabinet runs. Self closing action pulls the drawer closed at the end of travel, which helps drawers sit shut without manual pushing every time. The quiet wheel premium epoxy slide construction works in both face-frame and European applications, so one slide style can serve different cabinet construction methods in the same project. A positive stop feature halts the drawer at full extension, which helps protect the slide and prevents over-travel during repeated use. The lift out disconnect lets the drawer be removed at the slide, which simplifies shop finishing and later service work.
The slide height of 1-1/2 inch defines the vertical space required at the cabinet side, so drawer box heights can be planned to clear the runner while keeping tight reveals. Mounting space of 1/2 inch plus 1/32 minus 0 inch clearance on each side sets the side-to-side fit, so builders can size drawer boxes to 1 inch less than the cabinet opening for a consistent running clearance. Side mounting on the cabinet member uses the 32 mm mounting holes, which aligns with common line-bored patterns in Euro-style cases. Bottom and side mounting holes on the drawer member give flexibility in how the drawer box is attached, so different construction styles such as plywood or particleboard sides can be fastened securely. ANSI/BIFMA Grade 1 testing confirms the slide has been evaluated to that standard, which supports its use in demanding environments where slides cycle many times.
This PRO 50 Series side mount drawer slide serves as a standard working slide in both face-frame and European applications, which helps shops standardize hardware across kitchen, bath, and casework projects. The white epoxy coated finish pairs well with light interior cases, so the hardware does not stand out when drawers are open. With a height of 1-1/2 inch and a 24 inch length, the slide fits full-depth base cabinet drawers that need access toward the back without using full-extension hardware. Mounting space of 1/2 inch plus 1/32 minus 0 inch clearance on each side supports predictable drawer sizing, so once the opening is known, the drawer width can be repeated across a bank of cabinets. The unhanded design also means left and right locations are handled by the same part number, which reduces setup time when loading jigs or drilling templates.
The 3/4 extension travel brings most of the drawer contents into reach while leaving part of the slide engaged, which supports stability under the 75 lb rated load when drawers are pulled out. The self closing action engages near the end of the stroke, drawing the drawer snugly closed and helping drawers stay seated in busy kitchen and shop environments. Polymer wheels roll along the epoxy coated steel members, which reduces sliding friction and supports a lifetime of quiet, trouble-free performance under normal drawer use. The single captive design keeps the drawer member constrained in the runner, which helps tracking stay consistent over years of opening and closing. A positive stop at the open position prevents over-travel, which protects the slide raceways during firm pulls. The lift out disconnect lets the drawer box be removed from the slide, which simplifies sanding, finishing, and later adjustment or replacement of boxes without disturbing the cabinet member.
The PRO50 epoxy coated slide is rated at 75 lb per pair, which suits typical residential and light commercial drawer contents without overstressing the runners.
The slide uses 1/2 inch plus 1/32 minus 0 inch clearance on each side, so drawer width is sized 1 inch less than the cabinet opening for proper running fit.
The quiet wheel premium epoxy slide works perfectly in face-frame and European applications, so it can be used in both cabinet construction styles.
The 4000-24-1WT slide provides 3/4 extension, bringing most of the drawer out while keeping part of the slide engaged for stability under load.
The self closing action engages near the end of travel, pulling the drawer shut so fronts sit flush without needing to be pushed fully by hand.
The slide is made from 1.2 mm cold rolled steel with an epoxy coated white finish, giving a smooth running surface that visually matches light interiors.
The Pro 50 Series 24 inch self-close epoxy coated Euro slide combines a 75 lb rating, 3/4 extension travel, and unhanded side mount installation, so it fits many cabinet drawer runs that need dependable motion. With 1-1/2 inch height and 1/2 inch plus 1/32 minus 0 inch side clearance per side, it aligns with standard box sizing practices. The white epoxy coated steel and polymer wheel design deliver quiet travel, while the lift out disconnect and 32 mm mounting holes support efficient shop workflows. For projects using both face-frame and European applications, this single 4000-24-1WT slide specification can standardize hardware across the job.
Sold In: 25 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  DSPRO50RBN-R Mfr# EUSKT-1-R | PRO50 Series Rear Mounting Sockets, Right | ||||
Sold in: 1 Each |  DSPRO50RBN-L Mfr# EUSKT-1-L | PRO50 Series Rear Mounting Sockets, Left |
