Pro Value Series 16" 3/4 Extension Self-Close Epoxy Coated Euro Slides PRO 50 Series, Unhanded Side Mount White - 4000-16-1WT

Pro Value Series 16 Inch Epoxy Drawer Slide Use

Pro Value Series 16 inch epoxy drawer slide is a side mount drawer slide that supports drawers in cabinets where a 16 inch length is required, helping installers match common cabinet depths. The PRO50 epoxy coated slides are rated at 75 lb, so they handle many everyday drawer loads while staying within tested limits. Their self-closing action pulls the drawer shut at the end of travel, which helps drawers seat consistently without manual pushing. The slides use a quiet wheel premium epoxy design, so the drawer travel is smoother in normal cabinet use. These slides are unhanded, allowing the same part to work on either side to simplify inventory on the job. The color is white, so the hardware blends with light-colored cabinet interiors where a neutral finish is preferred. As part of Baer Supply's PRO50 line, these slides provide value-focused epoxy coated performance.

Key Slide Details That Support Daily Work

• The PRO50 epoxy coated slides carry a 75 lb rating, so drawers can hold typical contents while staying within the slide design limits for performance.
• The 16 inch length supports cabinets built around that depth, helping installers match slide length to carcass dimensions without trimming.
• The self-closing action at the end of travel pulls the drawer fully shut, which helps achieve consistent front alignment in repeated use.
• The single captive design keeps the drawer member engaged in normal travel, supporting controlled movement along the slide path.
• The lift out disconnect lets the drawer be removed from the cabinet slide, which helps with cabinet finishing, transport, or service access.
• The quiet wheel premium epoxy construction reduces running noise during opening and closing, improving perceived quality in finished work.

Mounting And Clearance Details For 16 Inch Slides

These side mount drawer slides use a mounting space of 1/2 inch plus 1/32 inch minus 0 inch clearance on each side, so cabinet and drawer widths can be laid out around that known gap for proper fit. The slides provide 3/4 extension, so most of the drawer box becomes accessible without the slide running to full extension length. Bottom and side mounting holes on the drawer member create layout options when attaching to different drawer box designs. The cabinet member uses 32 mm mounting holes, supporting layouts based on the 32 mm system for consistent hole spacing. The slide height is 1-1/2 inches, so the side of the drawer box needs that minimum vertical space at the mounting line. The unhanded side mount design means one model serves both left and right positions.

How These PRO50 Euro Slides Fit Into Projects

Where This 16 Inch Euro Slide Is Used

This product is a side mount drawer slide in the Drawer Slides & Accessories category, under Slides, Epoxy Coated Euro, so it fits projects that call for epoxy coated Euro style side mounts. The slides work in both face-frame and European applications, so they can be used in framed kitchens as well as frameless cabinet runs. With a mounting space of 1/2 inch plus 1/32 inch minus 0 inch clearance each side, the slides match drawer and opening designs built on that side gap, helping maintain consistent reveals. The 16 inch length works with cabinet depths where that slide length suits the interior, keeping the drawer box proportioned to the case. Their 3/4 extension travel lets drawers open far enough for everyday access in many kitchen, bath, or shop cabinets where full extension is not required. The white epoxy coated finish fits installations where a white interior or light casework is used.

Why These Slide Details Support Repeatable Results

The PRO50 epoxy coated 75 lb rated slides are ANSI/BIFMA tested and approved to Grade 1 requirements, so their performance characteristics have been measured against that standard for loading and operation. The polymer wheel is designed for a lifetime of quiet, trouble-free performance, which supports long-term smooth action under normal loads. Quiet wheel premium epoxy construction helps limit running noise, supporting consistent operation across many open and close cycles. The self-closing action combined with a positive stop helps drawers return to the same closed position, reducing variation in front alignment over time. The lift out disconnect provides a defined method to separate drawer and cabinet members, which simplifies finishing, jobsite access, and later adjustments. Material is 1.2 mm cold rolled steel with an epoxy coated surface, giving a steel structure with a coated finish suited to typical interior cabinet environments where steel strength and coated surfaces are useful. The unhanded design reduces part variation when ordering for multiple cabinets, so a single part number, 4000-16-1WT, covers both sides. Height of 1-1/2 inches keeps the slide profile relatively compact along the drawer side, helping it integrate with a range of drawer box constructions without excessive side height.

Common Questions About PRO50 16 Inch Drawer Slides

Select This 16 Inch Slide For PRO50 Epoxy Projects

The Pro Value Series 16 inch 3/4 extension self-close epoxy coated Euro slides, part number 4000-16-1WT, provide a white, unhanded, side mount option built from 1.2 mm cold rolled steel. With a 75 lb rating, ANSI/BIFMA Grade 1 approval, 1/2 inch plus 1/32 inch minus 0 inch side clearance, and 32 mm mounting holes on the cabinet member, these PRO50 slides align with common cabinet layouts. Use this model when a 16 inch, white epoxy coated, self-closing Euro style side mount slide fits the cabinet depth and drawer design.