Salice 200 Series Soft-Close Silentia Full Overlay Face-Frame;Frameless Thick Door Hinge Nickel, 94° Screw-On - C2PBAE9

Salice 200 Series Soft-Close Hinge For Thick Doors

Salice 200 Series soft-close hinge gives you a concealed cabinet hinge with a fully integrated Silentia+ soft-close mechanism inside the hinge cup, so the damping stays protected and out of sight on finished installations. The hinge works at 94 degrees of opening, which suits typical cabinet applications where you need access without the door projecting excessively past adjacent surfaces. The design supports full overlay on face-frame and frameless cabinets with thick doors, allowing generous coverage of the cabinet side while using a single hinge type across different constructions. It is suitable for doors up to 1-1/4 inch thick while maintaining minimal gaps between doors, helping you keep reveals tight even on heavy, thick door designs. Large overlays up to 24 mm are possible, which helps when covering wider face-frames or frameless sides without redesigning your cabinet layout.

Key Hinge Details That Support Cabinet Projects

• The Silentia+ integrated soft-close mechanism is operated by twin silicone-oil dampers, so door motion is controlled at the hinge and closing remains consistent for everyday use in busy environments.
• The soft-close mechanism is completely hidden within the hinge cup, so the cabinet interior stays clean-looking and there is no exposed damper hardware to collect dust inside the opening.
• The hinge is suitable for doors up to 1-1/4 inch thick while maintaining minimal gaps between doors, allowing you to spec thicker fronts without opening up the reveals between adjacent doors.
• Large overlays possible up to 24 mm mean you can cover more of the cabinet side or face-frame, which is useful when aligning doors across runs with different cabinet widths.
• The all steel hinge is nickel plated for corrosion resistance and is permanently self lubricating with environmentally safe lubricants, supporting smooth door action over time in typical cabinet environments.

Hinge Mounting And Practical Fit Details

This Silentia 94 degree cabinet hinge has a cup depth of 15.5 mm, which matches standard European-style boring setups while still housing the built-in soft-close components. The hinge cup edge drilling distance range of 3 mm to 9 mm lets you position the cup closer or farther from the door edge, helping you tune overlays and gaps on different cabinet constructions. Patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw lets you shift the door horizontally without tilting it, which speeds alignment across multiple doors in a run. The hinge is designed to work with Salice mounting plates, so you can pair it with the plate style that matches your face-frame or frameless installation approach.

Using This Concealed Hinge In Cabinet Builds

Where This Soft-Close Hinge Works Best

This concealed cabinet hinge is part of the Silentia Series 200 thick door soft-close hinges, so it is suited to installations where thicker doors are specified and a soft-close action is required. The full overlay capability on face-frame and frameless cabinets allows it to serve in applications where doors need to cover most of the cabinet side, which is common on modern styling with clean faces. Because the hinge supports large overlays up to 24 mm, it works well when you have face-frames of varying widths and still want a consistent overlay line across the run. The 94 degree opening angle provides enough door swing for everyday cabinet access while helping control how far the door projects into walkways or adjacent fixtures.

Why These Hinge Details Support Consistent Results

The Silentia+ integrated soft-close mechanism with twin silicone-oil dampers operates in any door position, so closing behavior stays constant whether a door is lightly or firmly pushed shut. The cup depth of 15.5 mm gives you a known boring dimension that fits common CNC and line-boring patterns, which helps reduce setup changes between different hinge types. The hinge cup edge drilling distance of 3 mm to 9 mm offers flexibility in door design, allowing small adjustments to the boring pattern to refine overlay and reveal on custom jobs. Parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw lets you fine-tune door alignment after mounting, which reduces rework when lining up multiple doors and drawers on a project. The all steel nickel plated construction with permanent self lubrication using environmentally safe lubricants keeps the moving parts protected and operating smoothly, which is important where doors are opened frequently throughout the day.

Common Questions About This Salice Silentia Hinge

Select This Hinge For Thick Soft-Close Doors

The Salice thick door soft-close hinge combines a 94 degree opening angle, suitability for doors up to 1-1/4 inch thick, and large overlays up to 24 mm, giving you flexibility across face-frame and frameless jobs. With 15.5 mm cup depth, 3 mm to 9 mm edge drilling distance, and parallel side-to-side adjustment via the hinge arm screw, it fits standard European boring patterns while still allowing precise alignment. Pairing with Salice mounting plates at Wurth Baer Supply lets this concealed hinge serve in a wide range of cabinet projects where integrated soft-close and tight reveals are required.