Dowel-Mount Thick Door Hinge for Full Overlay Cabinets

This Salice Series 200 Silentia hinge is built specifically for thick doors, delivering integrated soft-close on full overlay doors in both face-frame and frameless cabinets, with a press-in dowel mount for production-ready installation.

Key Features

• Thick door geometry supports doors heavier and deeper than the standard 16 to 22mm range where a conventional hinge would not seat correctly.
• Integrated Silentia soft-close slows the door over the final degrees of closing so it settles quietly without slamming.
• Full overlay straight arm positions the door to cover nearly the entire cabinet side, leaving only a narrow reveal.
• Dowel mount presses into pre-bored dowel holes in the door for fast, screw-free cup attachment in CNC and production environments.
• Works on face-frame and frameless cabinets when paired with the matching Salice base plate, sold separately.
• Three-way adjustment dials height, side, and depth after hanging so doors line up evenly across a run.

Where Thick Doors Need a Purpose-Built Hinge

A standard concealed hinge is engineered for doors in the 16 to 22mm range. Push a deeper, heavier door onto one and the cup does not seat right, the arm geometry is off, and the door will not close square. This hinge is designed from the start for thick doors, with a deeper 35mm cup at 13.5mm depth and arm geometry matched to the added mass. The 94 degree opening is the intended angle for this application: it gives the door the clearance it needs to swing without binding against the cabinet front. That restricted swing is not a shortcoming but the correct engineering for a thick door.

The 45mm boring pattern matches the hole spacing on a production-bored door. The cup presses in on pre-mounted dowels rather than screws, so there is nothing to drive once the door is positioned on the CNC. The hinge arm then clips to a Salice base plate mounted on the cabinet. That plate is a separate purchase and must be a Salice plate matched to this series. Plates from other brands will not connect to this arm.

Steel Construction and a Quiet Close in Nickel

The hinge is plated steel finished in nickel. Silentia soft-close is integrated directly into the hinge body, so there is no separate damper to add or forget. For thick doors that see daily use, that built-in damping protects the door and the cabinet box from repeated impact, which is where the finish and the joinery pay off over time. Height adjusts plus or minus 2mm and side adjusts plus 4.5mm or minus 1.5mm after installation, enough to bring a row of thick doors to an even reveal without removing them.

The Right Fit for High-Volume and Custom Work

This hinge is a practical specification for cabinet shops and contractors running thick-door jobs on face-frame or frameless boxes. The dowel mount is the detail that matters most in a production setting: bored doors drop onto the dowels and the cup is seated, no screwdriver needed at the door. Designers specifying thick-panel cabinet fronts get the same full overlay geometry and quiet close they would expect from a standard door hinge, sized to the application. For standard-thickness doors in the 16 to 22mm range, use a standard Series 200 hinge instead.

Common Questions

Thick Doors That Close Quietly and Hang Square

Specify this hinge when the job calls for full overlay thick doors with integrated soft-close, a production-ready dowel mount, and three-way adjustment that keeps every door in the run aligned.