Thick Door Engineering And Full Overlay Fit

This Salice 200 Series Logica hinge is built specifically for thick cabinet doors, delivering full overlay positioning with integrated Silentia soft-close on both face-frame and frameless cabinets.

Key Features

• Thick door construction provides the cup geometry and arm clearance that standard hinges cannot deliver on oversized door stock.
• Silentia soft-close damps the door over the final degrees of travel so it settles quietly without impact.
• Full overlay straight arm positions the door to cover nearly the entire cabinet side, leaving a narrow reveal.
• Toolless Logica mounting clips the hinge to the base plate without a screwdriver, speeding up installation.
• 94 degree opening angle is the engineered swing for thick doors, sized to clear the cabinet face as the door opens.
• Works on face-frame and frameless cabinets when paired with the appropriate matching base plate, sold separately.

Designed for Doors That Exceed the Standard Thickness Window

A standard concealed hinge is engineered for doors in the 16 to 22mm range. Push past that window with thicker door stock and a standard hinge cup will not seat correctly, and the arm geometry will not clear the cabinet face as the door swings. This hinge solves that problem directly. The 35mm cup bores into the thick door at a 13.5mm depth, and the arm geometry is matched to the mass of the door rather than forcing a standard-spec hinge to do a job it was not sized for.

The 94 degree opening angle is intentional. A thick door needs a tighter swing arc to clear the cabinet front without binding, and this hinge delivers exactly that clearance. It is the correct engineering for the application, not a compromise.

The hinge arm clips to a Salice base plate mounted to the cabinet. That plate is a separate purchase and must be a Salice plate matched to your cabinet construction, face-frame or frameless. Plates from other brands will not connect to this hinge.

Steel, Nickel Finish, and a Quiet Close That Holds Up

The hinge is plated steel finished in nickel. Integrated Silentia soft-close is built into the hinge body, so no add-on damper is needed. It slows the thick door through the final closing arc, taking repeated impact off the door, the frame, and the finish. On heavier door stock, where a slamming close puts more stress on the cabinet, that damping matters more than it does on a lightweight panel.

Three-way adjustment is available after mounting: height adjusts plus or minus 2mm, and side adjusts plus 4.5mm or minus 1.5mm, letting you bring doors to an even reveal once the cabinet is in place.

Where This Hinge Belongs

Specify this hinge when a project calls for full overlay doors on thick door stock and a soft close is part of the spec. It suits cabinet shops building furniture-grade pieces with heavier door profiles, designers specifying a premium feel on thick shaker or raised-panel doors, and contractors replacing hinges on existing thick door installations. It runs on both face-frame and frameless boxes, so it covers mixed job sites without needing two separate SKUs for the same door thickness.

For doors in the standard 16 to 22mm range, a standard concealed hinge is the right pick. This one is built for the applications where that range is not enough.

Common Questions

The Right Hinge for Thick Doors That Need to Close Quietly

When the door profile goes beyond what a standard concealed hinge can handle, this Salice thick door hinge keeps the install on spec with full overlay geometry, integrated Silentia soft-close, and toolless mounting that works on face-frame and frameless cabinets alike.