Salice 700 Series Soft-Close Hinge For Cabinets
Salice 700 Series soft-close hinge uses Silentia+ to control the decelerating action, so you can tune door closing to suit standard or special doors and get consistent motion. This concealed cabinet hinge has a 110 degree opening angle, which allows wide access to the interior while maintaining a European concealed look on the job. The hinge is designed for full overlay applications up to 21 mm overlay, letting doors cover the cabinet side properly for both face-frame and frameless layouts where that overlay is needed. A 13.5 mm hinge cup boring depth gives a predictable mortise depth, which simplifies drill setup and keeps runs repeatable. The hinge supports door thickness up to 25 mm, so it works on thicker doors without binding during the soft-close cycle.
Key Salice Silentia Features That Speed Cabinet Work
- Silentia+ soft-close adjustment switch lets you delay the decelerating action, so even special or heavier doors can be tuned for the ideal closing strength without swapping hardware.
- The 110 degree opening angle provides wide access into the cabinet, which helps during installation, hinge adjustment, and daily use where full interior reach is important.
- Edge bore distance (K) from 3 mm to 6 mm offers flexibility in drilling layouts, allowing you to match common shop patterns across different cabinet lines.
- Support for up to 21 mm overlay helps you hit your overlay targets on both face-frame and frameless cases, keeping reveals consistent across a run.
- Design for door thickness up to 25 mm allows use on thicker doors, so you can keep the same hinge family across a range of cabinet constructions.
- The integrated soft close motion gives a uniform closing action regardless of door size, reducing slam and improving feel without changing your basic drilling pattern.
Hinge Mounting, Boring, And Adjustment Details
This Salice Silentia full overlay hinge is a screw-on type, so it fastens directly to the door for a familiar installation process in cabinet shops. The 13.5 mm hinge cup boring depth and standard 45 mm x 9.5 mm Salice boring pattern create a known drilling setup, which helps jigs and CNC programs align across different projects. Edge bore distance (K) from 3 mm to 6 mm provides flexibility to position the cup relative to the door edge, supporting both face-frame and frameless layouts that fall in that range. Parallel side adjustment allows you to fine-tune door position along the cabinet side, which helps pull in consistent gaps and reduce time spent chasing reveals.
Where This Salice C7P6AE9 Hinge Fits Best
Using The Hinge On Face-Frame And Frameless Jobs
Salice Silentia full overlay face-frame;frameless hinges in this 700 Series model provide one solution for both cabinet construction styles, so shops can standardize on a single concealed cabinet hinge family. Support for up to 21 mm overlay lets doors cover the cabinet side properly whether you are hanging them on face-frame or frameless boxes within that overlay range. Door thickness up to 25 mm gives room to work with thicker fronts that might be used in higher-end cabinetry, while still keeping the 13.5 mm hinge cup boring depth for drilling consistency. The 110 degree opening angle is well suited for typical kitchen and casework layouts, giving good access without overextending into adjacent doors.
Compatibility with all series 200 mounting plates means this Salice C7P6AE9 hinge can work with existing Salice 200 plate inventories, helping maintain continuity in mounting heights and screw positions across projects. The standard 45 mm x 9.5 mm Salice boring pattern lines up with common shop tooling, letting the same templates or CNC programs handle multiple door styles. Integrated soft close motion and the Silentia+ switch combine to give uniform closing action regardless of door size, with the ability to adjust decelerating strength when heavier or special doors need a different feel. Parallel side adjustment then lets you refine alignment after doors are hung, which can reduce rework and speed final fit on site or in the shop.
Common Questions About Salice Silentia 700 Hinges
What type of cabinet hinge is the Salice C7P6AE9?
Salice C7P6AE9 is a European concealed long arm hinge in the Salice 700 Series, so it stays hidden when the door is closed and suits modern cabinet construction.
How does the Silentia plus soft-close switch help?
The Silentia+ switch on this hinge delays the decelerating action, letting you adjust soft-close strength so even special or heavier doors close at a controlled rate.
What opening angle does this Salice hinge provide?
The hinge provides a 110 degree opening angle, giving wide access to shelves and interiors while keeping the door clear enough for typical cabinet layouts.
What boring pattern and cup depth does it use?
The hinge uses a 13.5 mm hinge cup boring depth and a standard 45 mm x 9.5 mm Salice boring pattern, which simplifies drilling setups and jig selection.
Which mounting plates work with this Salice hinge?
This hinge is compatible with all series 200 mounting plates, so existing Salice 200 plate systems can be used across different cabinets and overlay needs.
What cabinet door sizes and overlays does it support?
The hinge supports door thickness up to 25 mm and overlay up to 21 mm, which covers many standard full overlay cabinet applications within those ranges.
Selecting This Hinge For Soft-Close Cabinets
Salice 700 Series soft-close hinge with Silentia+ gives you a concealed hinge that combines 110 degree opening, up to 21 mm overlay, and door thickness up to 25 mm in one part number. Compatibility with all series 200 mounting plates and the standard 45 mm x 9.5 mm Salice boring pattern lets you align this hinge with existing Salice layouts. For cabinet runs where consistent soft-close motion, European concealed styling, and a known drilling setup are priorities, this Salice C7P6AE9 hinge offers a practical way to keep installations uniform.
