Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Mulino pull 128mm describes a decorative cabinet handle from Amerock Corporation that is built for 5-1/16 inch center-to-center mounting, so it suits common drilled patterns on many cabinet and drawer fronts. The pull is part of the Mulino collection, which blends clean geometry with an assembled split-finish design, giving doors and drawers a consistent, modern look across a project. Its overall length of 6-1/4 inches provides a generous gripping area around the 128 mm screw spacing, which helps when opening wider or heavier fronts in everyday use. The Silver Champagne and Polished Chrome finish combination defines the visual character of the pull, so it can visually tie together mixed metal tones on hinges, faucets, or appliances in the same space. Constructed from aluminum, the pull offers a lightweight handle option that keeps load on the front panel fasteners modest during repeated opening and closing.
The 5-1/16 inch center-to-center measurement on this Amerock Mulino aluminum pull defines exactly where mounting holes must be bored, which supports accurate layout during cabinet or drawer fabrication. A projection of 1-9/16 inches sets the stand-off from the surface, offering predictable clearance for fingers between the pull and the door or drawer, useful when hardware is aligned in tight banks. The base width of 3/8 inch and base length of 1/2 inch concentrate the contact area at each mounting point, which helps distribute load at the fastened locations on the front. The specified M4 machine screw interface matches the tapped holes in the pull, so once the front is drilled to the 128 mm pattern, installation can follow a straightforward, repeatable fastening sequence.
The Amerock Mulino aluminum pull BP36724SC26 is identified as a handle within the Decorative Hardware & Moldings category, which positions it for use on cabinet doors and drawer fronts in woodworking projects. Its 5-1/16 inch (128 mm) center-to-center size aligns with a widely used metric boring pattern, so it can be specified across multiple cabinets in a run while holding a single drilling setup. The 6-1/4 inch overall length gives the handle enough span to sit proportionally on standard kitchen and bath doors without crowding panel edges, supporting consistent alignment across a bank of fronts. With a width of 1/2 inch through the gripping area, the pull presents a slim profile that works on narrow drawer fronts as well as taller doors, helping maintain a uniform visual line when hardware repeats. The Silver Champagne / Polished Chrome finish pairing brings both a softer metallic tone and a brighter chrome surface onto the same piece, which allows the handle to visually tie together mixed metal elements in built-in cabinetry, casework, or furniture projects.
The defined 128 mm center-to-center dimension on this Mulino pull directly supports repeatable drilling because the spacing can be programmed once into jigs or boring equipment and then applied to every door and drawer. Its 1-9/16 inch projection establishes a reliable stand-off that helps prevent knuckles from contacting the surface during use, which is especially useful on deeper drawer boxes that see frequent operation. The base length of 1/2 inch and base width of 3/8 inch concentrate each foot of the pull into a compact footprint, which simplifies layout near rail and stile intersections while still giving a stable bearing area at the fastener point. The aluminum construction keeps each handle light relative to its size, reducing cumulative weight on wide drawer fronts that may carry multiple pulls. The split Silver Champagne / Polished Chrome finish is part of the Mulino design language, so using this exact model across a project keeps the visual and dimensional details synchronized from cabinet to cabinet.
The BP36724SC26 Mulino pull has a 5-1/16 inch (128 mm) center-to-center dimension, which sets the drilling distance for mounting holes on cabinet doors and drawers.
The Amerock Mulino aluminum pull measures 6-1/4 inches (159 mm) in overall length, giving a longer gripping span around the 128 mm mounting pattern.
The Mulino 5-1/16 inch cabinet pull projects 1-9/16 inches (40 mm) from the mounting surface, creating working clearance behind the handle for fingers.
The BP36724SC26 Mulino pull is made from aluminum, providing a lightweight handle that limits load on the mounting points during repeated operation.
This Amerock Mulino pull has a Silver Champagne and Polished Chrome split finish, creating a mixed-metal appearance that coordinates with both warm and bright fixtures.
The Amerock Mulino BP36724SC26 pull uses M4 machine screws, matching the threaded holes in the handle for secure cabinet door and drawer mounting.
The precise 5-1/16 inch (128 mm) center-to-center drilling on the Amerock Mulino aluminum pull supports consistent hardware layout across doors and drawers in a run. Its 6-1/4 inch length, 1-9/16 inch projection, and 1/2 inch width give a predictable feel and clearance profile once mounted. The Silver Champagne / Polished Chrome finish pairing and Mulino collection styling align appearance and dimensions, so each BP36724SC26 pull can be specified confidently wherever this coordinated hardware look and size are required.
Sold In: 1 Each
