Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Hettich Actro 5D is a 250mm soft-close, full-extension undermount drawer slide built for frameless cabinets. This left-hand runner uses a ball-bearing carriage and carries 88 lb per pair, making it a capable concealed slide for shorter drawer runs in modern cabinetry.
At 250mm, this is one of the shorter lengths in the Actro 5D line, suited to spice drawers, shallow base cabinet inserts, bathroom vanity drawers, and utility pull-outs where a standard 18 or 21 inch slide would run past the back of the box. Frameless cabinet construction is required — the slide mounts directly to the interior side panel without face-frame clearance. The 88 lb per pair capacity is the working number for everyday loading; match that against the intended drawer contents before selecting.
Steel members with a zinc finish give the runner corrosion resistance for indoor service. The ball-bearing carriage is the distinguishing build detail of the Actro line at this price point: steel balls in retainers roll between formed raceways rather than on nylon rollers, which sustains smooth travel as the drawer ages and the load cycles accumulate. The undermount position keeps the hardware fully concealed beneath the drawer box, so the interior reads as clean wood regardless of finish choice.
Cabinet shops running Hettich Actro 5D hardware through frameless production lines will stock this left-hand 250mm runner to cover their shortest drawer applications. Installers specifying handle-less modern kitchens reach for the Actro line when soft-close and clean sightlines are both required. The 5D front adjustment is particularly useful on production runs where aligning many drawer fronts quickly reduces labor. For 3/4 inch drawer sides or face-frame construction, a different model in the Actro family applies — this SKU is engineered for 1/2 to 5/8 inch (12.7 to 16mm) drawer sides in frameless boxes.
This is a single left-hand runner. Order the matching right-hand 250mm Actro 5D runner alongside it to make one working pair for a drawer.
It is engineered for drawer sides between 1/2 inch and 5/8 inch (12.7 to 16mm). The box must also be built to Hettich's published specification for the Actro 5D series, including the correct nominal length, box-width formula, bottom recess, and rear notch.
This version is for frameless cabinets. Face-frame installations require a different configuration or the appropriate series-specific rear mounting brackets — check the Actro 5D face-frame offerings for that application.
The 5D designation indicates the front locking device provides adjustment in five directions — typically height, side, tilt, depth, and a fifth axis — so the drawer front can be trued after the drawer is installed. Note that adjustment range and axis specifics live in the Hettich installation guide for this series.
Front locking devices for the Actro 5D are series-specific Hettich components. Confirm whether they are included with this bulk runner SKU or need to be ordered separately before placing your install order.
Match this 250mm left-hand Actro 5D runner with its right-hand counterpart, build the drawer box to Hettich's specification, and the soft-close full-extension result installs cleanly into any frameless cabinet that calls for a compact concealed runner.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  HT9257060 Mfr# 9257060 | Hettich Actro 5D 250 mm Soft-Close Full Extension 88 lb Undermount Drawer Slide, Right Hand, Zinc, 9257060 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set |  HT9257268 Mfr# 9320333 | Actro 5D Left/Right 4-Way Adjustable Locking Device Set |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set |  HT9257706 Mfr# 9257706 | Hettich Actro 5D Depth Adjuster, Gray, 9257706 |
