Hettich Actro 5D 550mm Drawer Slide Use

Hettich Actro 5D 550mm drawer slide is a full extension undermount runner designed for combining with wooden drawers, so the runner stays hidden while the drawer travels its full length for clear access to stored items. The soft-close function gently controls closing, which reduces slamming in everyday cabinet use. The runner is specified as left hand, so it serves as the left-side component in the Actro 5D undermount system for accurate sided installation. Load classes XS (10 kg), L (40 kg), and XL (70 kg) show that the runner series is engineered for a range of drawer weights, giving planners a clear framework when matching drawer size and contents to the system capacity. Load capacity to EN 15338, Level 3 indicates the runner series is tested against a recognized furniture hardware standard, which supports use in demanding cabinet environments where consistent performance matters.

Key Actro 5D Runner Details For Projects

• The full extension design lets the drawer open over its entire nominal 550mm length, which exposes the rear of the drawer for easier access in kitchen, bath, or commercial casework layouts.
• The undermount configuration positions the runner beneath the wooden drawer, which keeps the hardware out of sight and supports clean cabinet lines while still providing guided movement.
• The soft-close function moderates the final closing stroke, which helps drawers settle quietly against the cabinet front in regular use.
• Tool-less height adjustment up to plus 3 mm supports fine vertical alignment between fronts, which speeds on-site adjustments without removing the runner from the cabinet.
• Side adjustment up to plus or minus 1.5 mm supports lateral tuning of the drawer front, which helps create even reveals across a run of cabinets.
• Tilt adjustment up to plus 4 mm provides additional front angle control, useful when aligning tall drawer fronts so edges stay parallel with adjacent fronts.
• Radial adjustment up to plus or minus 1.5 mm adds another axis of fine tuning, helping drawers travel smoothly when the cabinet or drawer has minor dimensional variation.
• Galvanized steel construction provides a coated metal runner body, suitable for typical indoor cabinet environments where basic corrosion resistance is beneficial.

Installation And Adjustment On Wooden Drawers

This Actro 5D undermount drawer runner is designed for combining with wooden drawers, so the slide attaches below the drawer box rather than to the side. Tool-less height adjustment up to plus 3 mm allows vertical tuning of the drawer front after the runner is mounted, which shortens installation time during cabinet hanging and trim-out. Side adjustment up to plus or minus 1.5 mm lets the installer shift the drawer laterally, helping to correct small case tolerances that affect front gaps. Tilt adjustment up to plus 4 mm and radial adjustment up to plus or minus 1.5 mm give further control over the drawer position, which is useful when dialing in smooth travel and precise front alignment in multi-drawer configurations.

Using The 9257083 Actro 5D Runner In Work

Where This Actro 5D Undermount Drawer Runner Fits

The ACTRO 5D RUNNER 88LB 550MM LH designation identifies a 550mm long Actro 5D runner with a load class of 40 kg, which suits medium-duty drawers within the Actro 5D family. Because the runner is specified for combining with wooden drawers, it is intended for projects using wooden drawer boxes where an undermount, concealed slide is preferred. The left hand configuration defines its placement on the left side of the cabinet opening within a paired installation, which is important when laying out hardware for multi-drawer banks. Load capacity to EN 15338, Level 3 positions the runner series for furniture and cabinet use where the slide is subjected to repeated openings, a scenario common in residential and commercial casework.

Why Actro 5D Adjustments Support Precise Results

The Actro 5D runner provides tool-less height adjustment up to plus 3 mm, so installers can raise the drawer front slightly after mounting to achieve clean alignment along a stack of fronts. Side adjustment up to plus or minus 1.5 mm lets the drawer front shift left or right on the runner interface, which helps correct small dimensional differences between cabinet openings. Tilt adjustment up to plus 4 mm influences the angle of the drawer front relative to the cabinet, allowing the top and bottom gaps to be matched visually. Radial adjustment up to plus or minus 1.5 mm helps refine how the drawer box engages the runner, supporting smoother movement when the cabinet or box is slightly out of square. Together, these adjustment ranges give installers more control when working to tight visual tolerances in modern cabinetry.

Common Questions About This Hettich Drawer Runner

Selecting This Runner For Your Drawer Build

This Hettich Actro 5D undermount full extension slide brings soft-close action, 550mm length, and multi-axis adjustment to wooden drawer projects, which supports clean alignment and smooth operation. The left hand configuration and 40 kg load class give installers clear parameters when planning runner positions and drawer sizing. With construction in galvanized steel and performance aligned with EN 15338, Level 3 for the series, this runner fits well into residential or commercial cabinet work where consistent drawer travel is important. For projects needing concealed undermount hardware and fine front adjustment, this 9257083 Actro 5D runner offers a detailed set of functional characteristics to match against drawer and cabinet layouts.