Hettich Actro 5D 420mm Soft-Close Full Extension Undermount Drawer Slides, Ball Bearing Right hand Zinc - 9257074

Hettich Actro 5D 420mm Drawer Slide Use

Hettich Actro 5D 420mm drawer slide is a full extension undermount runner designed for combining with a wooden drawer, so the mechanism stays out of sight while the drawer opens fully for clear access to stored contents during everyday use. This runner is a soft-close system, which slows the drawer in the last part of travel so it closes gently and helps reduce slamming in busy kitchen, bath, or shop environments. The runner is rated to a load capacity described as load classes XS (10 kg), L (40 kg), and XL (70 kg), giving installers clear guidance on how the system supports different drawer weight ranges in cabinet projects. Load capacity to EN 15338, Level 3 connects this runner to a recognized standard, which signals that the hardware performance is tested for typical furniture use. The runner length of 420mm matches common cabinet depths, helping align drawer design with standard carcass dimensions.

Key Actro 5D Runner Details For Projects

• This runner is described as a full extension runner for combining with a wooden drawer, which lets the drawer travel its entire length so stored items are accessible from the front and back without needing extra reach.
• The optional Push to open Silent opening system works with this runner, so drawers can be opened by a front tap instead of pulls, which is useful where handle-free fronts or clean design lines are planned.
• Soft-close functionality is built into the runner, so the closing stroke is controlled and damped, which supports quieter cabinet operation in residential or commercial furniture where noise control matters.
• Tool-less height adjustment up to plus 3 mm, side adjustment up to plus or minus 1.5 mm, tilt adjustment up to plus 4 mm, and radial adjustment up to plus or minus 1.5 mm allow fine-tuning drawer position so fronts align neatly in the face frame or frameless layout.
• The runner is made from galvanized steel, which provides a zinc coating on the steel body so the surface resists typical indoor moisture and wear in cabinet environments over ongoing use.

Actro 5D Undermount Runner Mounting And Setup

This product is classified as an undermount drawer slide, so it supports the drawer from below, which keeps the sides clean for wooden drawer construction and allows the runner to be concealed once installed. The tool-less height adjustment up to plus 3 mm helps installers raise the drawer front slightly after mounting, which is useful when aligning multiple drawers across a cabinet run. Side adjustment up to plus or minus 1.5 mm lets the drawer be shifted left or right on the runner, which helps maintain even gaps between fronts and adjacent doors. Tilt adjustment up to plus 4 mm gives additional control over the drawer front angle, which is important when correcting minor racking or achieving a consistent reveal. Radial adjustment up to plus or minus 1.5 mm supports fine fit at the connection point, which helps drawers run smoothly along the full extension.

Using The 88lb Actro 5D Runner In Work

Where This 420mm Undermount Runner Fits

The SAP description "ACTRO 5D RUNNER 88LB 420MM RH" identifies this model as a 420mm right hand runner with an 88lb class, which ties the hardware to medium-to-heavier duty drawers in furniture projects. Being a full extension runner for combining with a wooden drawer means it fits applications where the cabinet depth corresponds with the 420mm length, so the drawer can travel fully out without overextension. The product class "Undermount Drawer Slides" places this runner in installations where the hardware is mounted beneath the drawer box, which supports projects aiming for a concealed slide look. Load classes XS (10 kg), L (40 kg), and XL (70 kg) show that the runner system is structured to cover different drawer weight bands, so the same Actro 5D concept can be used across small, medium, and larger drawers in a coordinated furniture line.

Why Actro 5D Adjustments Support Clean Results

The tool-less height adjustment up to plus 3 mm is built into the Actro 5D runner, letting installers raise the drawer front relative to the runner without separate tools, which helps bring fronts into level across a bank after the cabinet is already anchored. Side adjustment up to plus or minus 1.5 mm is provided on the runner, so minor case or drawer width variation can be balanced by shifting the drawer sideways for consistent reveals. Tilt adjustment up to plus 4 mm allows the front angle to be tuned, which is particularly valuable when tall fronts or high-gloss finishes make any misalignment immediately visible. Radial adjustment up to plus or minus 1.5 mm gives another dimension of fine control at the coupling area, helping the drawer engage the undermount runner accurately and reducing the chance of rub or binding along the full extension travel. With soft-close functionality combined into this adjustable runner, the final result is a drawer movement that can be aligned, balanced, and then closed quietly in everyday operation.

Common Questions About Hettich 9257074 Runner

Selecting This Actro 5D Runner For Drawers

The SAP description and web description define this product as the ACTRO 5D RUNNER 88LB 420MM RH, a full extension undermount runner for wooden drawers with soft-close and multiple adjustments. The load capacity to EN 15338, Level 3 and stated load classes XS (10 kg), L (40 kg), and XL (70 kg) show how it is positioned for various drawer weights in furniture projects. When a 420mm undermount drawer slide is needed for a wooden drawer, this Hettich Actro 5D model provides a concealed mounting style with height, side, tilt, and radial adjustments to support precise drawer alignment in finished cabinetry.