Hettich Actro 5D Drawer Slide For 250mm Drawers

Hettich Actro 5D drawer slide is a full extension undermount runner designed for combining with a wooden drawer, so the slide stays hidden while the drawer travels fully out for clear access. The runner offers a soft-close function, which slows and pulls the drawer shut, reducing slamming in everyday cabinet use. This model is the 250mm length version, matching shorter drawer depths where space is limited. The runner is rated as an 88 lb load class L, providing capacity for typical residential or light commercial storage. Load capacity is tested to EN 15338, Level 3, which defines its performance under standardized cycle and weight conditions. The runner is designated as right hand, so it fits the right side of the drawer system in the Actro 5D configuration. Construction in galvanized steel provides corrosion-resistant surfaces for normal shop or kitchen environments.

Key Actro 5D Undermount Runner Advantages

• The full extension runner design lets the drawer travel its complete length, giving access to items at the back without removing the drawer during normal use.
• The soft-close function lets the drawer close quietly, which helps control noise and reduces impact on the drawer front and cabinet over repeated openings.
• The runner is intended for combining with a wooden drawer, allowing a wood box design while keeping the hardware beneath the drawer for a cleaner cabinet interior.
• The load class L rating at 88 lb supports typical storage loads, so medium-weight contents can be handled within the range designed for this runner.
• Load capacity to EN 15338, Level 3 means the runner has been tested to a recognized standard, which supports predictable performance in regular cabinet duty cycles.
• The galvanized steel construction provides a zinc-coated surface, which resists typical indoor moisture and helps the moving parts operate smoothly over time.

Installation And Adjustment For Precise Drawer Fit

This Actro 5D undermount drawer slide uses a tool-less height adjustment up to plus 3 mm, so the drawer front can be raised relative to the cabinet without separate tools during fitting. Side adjustment up to plus or minus 1.5 mm lets the installer shift the drawer sideways on the runner, which helps align reveals between fronts across a run of cabinets. Tilt adjustment up to plus 4 mm allows the drawer front angle to be fine-tuned, supporting consistent gap from top to bottom. Radial adjustment up to plus or minus 1.5 mm lets the drawer position be tuned in depth-related alignment, aiding smooth closing and soft-close engagement. These built-in adjustments create a flexible fit-up process when working with wooden drawer boxes and varying cabinet conditions.

Using This 88lb Full Extension Runner In Projects

Where This Undermount Slide Works Best

This 88 lb full extension runner with 250mm length suits shorter wooden drawers where full access is still important. The undermount configuration keeps the hardware beneath the drawer, which is useful when a clean interior appearance is preferred in cabinets. Its rating as load class L means it is aimed at applications in the 40 kg range within the Actro 5D family, fitting many everyday storage drawers. The runner integrates soft-close, which is valuable in kitchen, bath, or workroom cabinets where controlled closing supports a quieter workspace. Use with wooden drawers allows the cabinetmaker to apply standard wood box construction while relying on the Actro 5D runner to manage movement and load.

Why Actro 5D Adjustments Support Accurate Results

The tool-less height adjustment up to plus 3 mm lets small vertical changes be made quickly at installation, which is important when aligning drawer fronts with doors or adjacent drawers. Side adjustment up to plus or minus 1.5 mm gives room to correct for cabinet or drawer width variations, helping create even side gaps without reworking the box. Tilt adjustment up to plus 4 mm affects how the drawer front sits relative to the cabinet face, so the installer can fine-tune top-to-bottom reveals after the runner is mounted. Radial adjustment up to plus or minus 1.5 mm influences how the drawer meets the cabinet in the closing direction, which helps coordinate smooth soft-close action and front flushness. Together, these adjustments support repeatable alignment across multiple drawers built around the Hettich Actro 5D runner system.

Common Questions About Hettich 9257060 Runner

Selecting This Actro 5D Runner For Your Drawers

The Hettich Actro 5D 250mm soft-close full extension undermount drawer slide combines an 88 lb load class L rating with EN 15338 Level 3 testing, which supports dependable movement in wooden drawers. Its tool-less height, side, tilt, and radial adjustments provide flexibility to dial in drawer front alignment across a cabinet run. The galvanized steel construction and right hand designation define its material and position in the slide set. For projects that call for a 250mm undermount runner with soft-close performance and detailed adjustment capability, this Hettich Actro 5D runner offers a focused solution.