Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Hettich KA 5632 is a 26 inch full-extension side-mount ball bearing drawer slide, rated 90 lb per pair, built for deep drawer boxes where shorter slides fall short. Steel construction, zinc finish, and a standard-motion design make it a straightforward choice for pantry-depth cabinetry, workshop storage, and tall utility drawers that need the full run of the box brought out to the cabinet face.
Most kitchen and bath cabinet drawers run 18 to 22 inches deep, but pantry pullouts, tall storage units, and shop cabinets regularly push past that range. At 26 inches, this slide reaches deeper boxes without requiring a custom or heavy-duty solution. Full extension means the entire drawer contents come clear of the opening — the spice jars at the back of the pantry, the drill bits at the rear of the tool cabinet, the rolled prints at the back of the plan drawer — all reachable without reaching in blind. Standard motion keeps the action free: no damper to resist a fast pull, no spring close to fight when loading the drawer with both hands.
Cold-formed steel members carry a zinc finish that protects against the humidity and incidental moisture common in kitchens and garages through years of indoor use. Zinc is the working standard for side-mount ball bearing slides — functional, durable, and unobtrusive beside the open drawer box. This slide is not rated for wet, exterior, or washdown environments; it belongs in dry indoor installations where the finish will do its job for the long run.
The 26 inch length and 90 lb per pair rating fit the professional cabinetmaker building a pantry tower, the contractor fitting out a utility room, and the shop owner adding deep storage drawers to a workbench. Cabinet shops running high-mix production work appreciate the non-handed design — pull two slides from the same bin and install without sorting. The standard-motion action also suits retrofits into existing casework where adding a closing mechanism was never part of the plan. Build the drawer box 1 inch narrower than the cabinet opening to leave 1/2 inch of side clearance per slide, mount on the 32mm hole pattern, and the installation follows the same process as any side-mount ball bearing slide in the shop.
No — 26 inches is the closed length of the slide. Because this is a full-extension slide, travel is approximately equal to the slide length, bringing the complete drawer out to the cabinet face. Slide length and extension travel are two separate facts.
A standard pantry pullout loaded with canned goods can approach or exceed the 90 lb per pair rating quickly. Weigh the expected load before committing to this slide; for heavier pantry work, step up to a slide rated in the 150 lb class or higher.
It will, but face-frame construction sets the cabinet side back from the face, so the rear of the slide needs support. Add the appropriate rear mounting brackets for this series — brackets are series-specific and sold separately.
Yes. Standard motion means no detent, no spring, and no damper — the drawer rests wherever it stops. If you need it to stay open hands-free, this is the right behavior. If you need it to pull itself closed, look at the self-close variant instead.
Confirm the sold-as unit at checkout — verify whether the listing ships as a pair or a single slide before ordering the quantity your project needs.
When the drawer box runs deep and the contents need to come all the way out, the 26 inch KA 5632 closes the gap between what a shorter slide can reach and what the job actually demands.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set |  HT1134110 Mfr# 1134110 | KA 5632 Rear Bracket Support (100/Box) |
