NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR2130SMB1OUF1 to RSR2130SMB1OUF1.

Omega National 30 Inch Red Oak Signature Hood Use

Omega National 30" Red Oak Signature Hood describes a 30 inch wide unfinished red oak wall mount wood range hood system that creates a matching wood focal point above the cooktop in a kitchen run. The 30 inch width pairs this hood with typical 30 inch cooking zones so the wood hood centers over standard base cabinet layouts. The straight flat valance design forms a clean front profile that ties in with simple cabinet door styles without extra shaping. The wall mount configuration places the hood directly on the wall above the range so the installer builds a traditional upper cabinet style layout around it. The wood construction in unfinished red oak allows the hood to be finished on site to coordinate with existing red oak cabinetry. The Signature series identity groups this model with matching widths in the same line, which supports consistent style across multiple hood sizes on a project.

Wood Range Hood Details That Support Jobs

• The complete turn-key wood range hood system description means hood, liner, hanging hardware, and a choice of ventilation and chimney sizes are part of the design concept, so installers can plan a coordinated hood assembly around one matched system.
• The 30 inch width, as stated in the product name and description, positions this hood for 30 inch wide cooking areas, which helps layout work when aligning upper cabinets and setting base cabinet spacing in standard kitchen designs.
• The unfinished red oak material allows on-site staining or finishing to match red oak cabinetry, which lets shops and installers use the same hood body across projects while still matching different red oak finish schedules.
• The straight wall mount range hood style creates a clear vertical mounting surface on the wall, helping layout, stud location, and integration with adjacent wall cabinets in typical kitchen runs.
• The made in the USA statement ties this hood to domestic manufacturing origin, which matters on projects that specify U.S.-made wood components as part of their material requirements.
• The wood range hood belonging to a Signature series with 30, 36, 42, and 48 inch widths supports jobs where multiple hood sizes are required while holding the same design language across the line.

Wall Mount Installation And French Cleat Hanging

The description of simple installation featuring a patented French cleat hanging method means the hood body is designed to hang from a cleat, so installers can level and secure the cleat first and then lift the hood onto it. This style of hanging method shifts the fine leveling work to the cleat stage, which helps when working alone or in tight spaces. The straight wall mount configuration means the hood sits flush against the wall, which streamlines alignment with wall cabinets and simplifies marking reference lines. The turn-key system note, referencing hood, liner, hanging hardware, and ventilation and chimney options, indicates that the hood structure and liner are engineered to cooperate with the hanging approach so the wall mount workflow stays coordinated from cleat through final positioning.

Applying This Omega National Hood In Kitchens

Where This 30 Inch Wood Range Hood Fits Best

The category listing as a wood range hood in kitchen and bath cabinet accessories places this hood in upper cabinet runs above cooktops or ranges, so it becomes part of the built-in cabinet layout rather than a separate appliance look. The 30 inch width matches common 30 inch cooking appliances, which helps keep reveals even when flanking the hood with wall cabinets of planned sizes. The wall mount configuration means it installs on standard framed or suitable kitchen walls instead of within an island, which aligns with most straight-run or L-shaped layouts. The unfinished red oak construction positions this hood for projects using red oak doors, face frames, or trim, allowing shops to finish the hood and cabinets together for color consistency along the wall.

Design And Liner Details That Support Workflow

The description of silver metallic liners featuring a cut-out to accommodate Broan NPRHVBB20SM 390 CFM and NPRHVBF10SM 250 CFM ventilators means the liner is preconfigured for these two Broan ventilator models, reducing layout work for cut openings. That compatibility directs ventilator selection toward NPRHVBB20SM or NPRHVBF10SM units, which simplifies specifying blower performance while staying within the liner design. The note that ventilators are not included states that the blower units are specified separately, which allows designers to choose between the 390 CFM or 250 CFM Broan options for different ventilation needs. The chimney shown in the photo being sold separately means the visible chimney section is ordered on its own, so installers can adjust chimney selection to ceiling height or design requirements while keeping the 30 inch Signature hood body constant. The availability of hoods in 30, 36, 42, and 48 inch widths gives shops one product family that covers multiple appliance sizes, helping maintain the same style whether the plan calls for a 30 inch range or a larger unit on higher-end jobs.

Common Questions About This Omega National Hood

Select This 30 Inch Hood For Red Oak Runs

The Omega National 30" Red Oak Signature Hood pairs a 30 inch wall mount wood hood body with a silver metallic liner designed for specific Broan ventilators, giving installers a coordinated starting point. The unfinished red oak construction suits projects where the hood finish must track with red oak cabinet finishing schedules. The patented French cleat hanging method supports straightforward wall mounting and leveling. For jobs that call for a 30 inch wood range hood in red oak, this model aligns wood species, mounting style, and liner compatibility in one coordinated system.