Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Grass Zargen drawer side and slide kit in White gives cabinet builders a clean, factory-finished metal drawer at 550mm (21-5/8 inch) nominal length. This is a complete side-and-runner set for the Zargen drawer platform, pairing steel side profiles with integrated runners in a coordinated White finish — sized for deeper base cabinets and pantry-depth layouts.
Most kitchen base cabinets are built at 24 inches of usable interior depth, and a 550mm nominal length fills that run cleanly. The depth is well suited to pots-and-pans drawers where contents are large and heavy — the 100 lb rating means a fully loaded drawer stays controlled. It also works for pantry-style pull-outs where reaching the back matters. If your layout calls for a drawer box that nearly fills the cabinet interior front to back, 550mm is the length to specify.
The Zargen side profiles are formed steel — a single-walled metal system that replaces the wood drawer box sides the shop would otherwise cut and groove. The integrated runner is built into the profile, so there is no separate slide to mount to a wood box. The White finish is applied to the steel and coordinates with white cabinet interiors and laminated or painted drawer fronts. Because the runner is part of the side profile, the system's closing behavior and motion performance are consistent across the drawer's full load range up to 100 lb. Extension type and closing mechanism details are in the structured spec block for this SKU.
Cabinet shops building white-interior kitchens benefit from a metal drawer system because it eliminates the drawer box machining step — no grooving for the bottom, no dado for the back, no sanding raw sides. The 550mm length and White finish together suit production runs where multiple drawers in the same depth share one finish specification. For renovation contractors retrofitting drawers into existing cabinetry, this kit confirms fit with a single nominal length and finish call. Designers specifying handle-less or minimalist interiors find the White Zargen sides work behind a range of front materials without clashing. The 3-3/8 inch side height leaves room for interior organization inserts in the drawer above.
Zargen accessories — front fixings, cover caps, and gallery rails — are Zargen platform parts, but finish-matched sets look best. Use White Zargen accessories with this White kit to keep the interior consistent. Do not substitute front fixings from other drawer system brands; they are not cross-compatible.
Zargen side profiles use a bottom panel cut to the system's published formula — the bottom is not included in this kit and must be cut to the manufacturer's specification for the 550mm nominal length. Check the Grass Zargen cutting dimensions before machining the bottom.
Metal drawer systems like Zargen are primarily designed for frameless (32mm grid) cabinet construction. Use in face-frame cabinets may require additional mounting hardware; confirm the installation method with the Grass Zargen installation guide before ordering for face-frame work.
Verify the sold-as unit on this SKU before ordering — Zargen kits are typically sold as a set covering one drawer, but confirm the pack contents in the structured spec block or with your sales contact to avoid a short order.
The Grass Zargen 550mm White kit removes the wood box from the workflow and replaces it with steel profiles that are ready to install — the right call for shops where drawer box machining is the bottleneck and white-interior cabinetry is the specification.
Sold In: 1 Set