3-3/8 Inch Profile Height and a Self-Closing Ramp Built Right In

This Grass Zargen drawer side and slide kit pairs a 3-3/8 inch white epoxy steel side profile with an 18-1/2 inch self-closing slide in one integrated unit. It is part of the Zargen 6036 drawer system and is designed for cabinet shops and builders who need a complete, engineered side-and-runner assembly rather than a loose box plus a separate slide.

Key Features

• 3-3/8 inch side height keeps the profile low for standard utility and kitchen drawers without sacrificing structural depth.
• 18-1/2 inch length suits typical base cabinet drawer depths found in most kitchen and bath layouts.
• 100 lb weight capacity supports a full load of cookware, utensils, or shop supplies without deflection.
• 3/4 extension opens the drawer to approximately three-quarters of its full depth, giving solid access to front and mid-drawer contents.
• Self-closing ramp mechanism pulls the drawer shut over the final inch — a positive, spring-assisted close, not a damped soft-close.
• White epoxy finish on the steel profile blends into painted interiors and matches Zargen system accessories in white.

Where This Side-and-Slide Combination Earns Its Place

The Zargen system bundles the drawer side and the running hardware into a single component, which cuts layout time and eliminates the compatibility question you get when spec-ing a separate box and slide. That integration makes it practical for production runs: base cabinet drawers in kitchens, utility rooms, and shop casework where the 3-3/8 inch profile height covers most standard drawer-depth requirements. The 18-1/2 inch length is the right call for 21 inch nominal cabinets when the back wall and rear hardware consume the remaining depth. The 3/4 extension brings the front two-thirds of the drawer fully accessible — enough for everyday reach-in use — while keeping the hardware cost below full-extension alternatives.

Steel, White Epoxy, and the Self-Closing Close

The side profile is formed steel finished in white epoxy, the same durable coating used across the Zargen program. White epoxy holds up to the humidity and cleaning cycles common in kitchen environments and presents a clean face inside painted or white-laminate cabinet boxes. The self-closing ramp is a mechanical close: as the drawer reaches the last inch of travel, the ramp engages and pulls it home. That is a positive, spring-style close — reliable and consistent — but it is not a damped soft-close. Buyers who need a damped, whisper-close action should look at Zargen configurations with integrated soft-close damping. The 100 lb capacity rating applies to this drawer side and slide assembly.

Shops and Installers This Kit Is Built For

Cabinet shops running painted or white-interior production lines get the most from this SKU. The white epoxy finish matches without a touch-up step, and ordering a single integrated side-and-slide component simplifies the cut list for each drawer opening. Installers retrofitting older face-frame or frameless cabinets with a like-for-like Zargen replacement also find the self-closing action and 100 lb capacity a dependable baseline. The 3/4 extension suits applications where the drawer does not need to clear a countertop overhang or reach the very back of a deep box — a workable trade-off in utility and secondary storage drawers.

The Right Profile, Ready to Run

When the job calls for a white-interior drawer that closes on its own and handles a solid working load, this Zargen 3-3/8 inch side-and-slide assembly delivers those three things in one component — with no separate slide to spec, source, or align.