Zargen 6036 Drawer Side Slide with 100lb Capacity, 3/4 Extension, Self-Closing, 3-3/8", White Epoxy, 20
Description
Zargen 6036 Drawer Side Slide For Fast Builds
Zargen 6036 drawer side slide with 100lb capacity gives you an integrated Euro drawer slide and metal side panel system that supports heavy everyday loads, so shop-built drawers handle regular use in kitchen, office, or commercial cabinetry projects.
The system is described as cost effective, which helps control hardware costs on multi-drawer runs where consistency and repeatability matter. It lets users assemble and install a drawer in two minutes, which speeds production when building banks of drawers on larger cabinet jobs.
Automatic production capable design significantly reduces the number of steps required to make a drawer, helping streamline machining and assembly processes in a busy shop. Cabinet member design allows for use in 32mm cabinet construction, supporting accurate line boring layouts commonly used in system-based cabinet manufacturing.
Drawer material thickness is 1.3mm in a white epoxy finish, giving a slim, metal drawer side profile with a light-colored, coated surface that coordinates with typical white casework interiors and resists contact wear in normal cabinet environments.
Key Grass Zargen Features That Save Time
- The integrated Euro drawer slide and metal side panel system reduces separate component handling, so installers work with one coordinated assembly instead of separate slides and sides.
- Automatic production capable construction reduces the number of steps required to make a drawer, which supports high-volume cabinet production lines and consistent drawer construction from unit to unit.
- The built in self-closing feature automatically closes the drawer within a range of 2-5/8 inches, so drawers pull themselves shut in the final travel, helping fronts sit back against the cabinet face.
- The system allows drawer fronts to be easily adjusted in three ways - height adjustment plus or minus 2mm, side-to-side adjustment plus or minus 1.5mm, and angle adjustment plus or minus 1mm - giving installers fine control to align reveals.
- Standard system is 7/8 extension, so drawers open to expose most of the interior, which suits many base and wall cabinet layouts where full access to the rear is not critical.
- Using item number GF6200, the slide system becomes fully extendable and existing drawers do not have to be altered, which simplifies upgrading access on installed drawers without rebuilding the drawer box.
Installation, Fit, And 3/4 Extension Details
The cabinet member design allows use in 32mm cabinet construction, so the slide interfaces with line-bored system holes, supporting precise vertical alignment across stacked drawers in frameless cabinetry runs.
The standard system is 7/8 extension, often called 3/4 extension, meaning the drawer projects far enough for good visibility of stored items while keeping some length supported inside the cabinet, which benefits stability under heavier loads.
Using item number GF6200, the slide system becomes fully extendable, allowing drawers to travel farther out for better access to the back. Because existing drawers do not have to be altered, this extension change fits into retrofit work on previously assembled boxes.
The system allows drawer fronts to be easily adjusted in three ways: height adjustment plus or minus 2mm, side-to-side adjustment plus or minus 1.5mm, and angle adjustment plus or minus 1mm, so installers dial in even gaps around fronts after the casework is set.
How This Grass Zargen Drawer System Works
Where This 3-3/8 Inch Metal Drawer Side Fits
The drawer side height is 3-3/8 inches, giving a mid-height metal drawer wall that suits general-purpose storage where contents need containment without excessive side height. This dimension works well for many kitchen, bath, or shop drawer layouts.
Cabinet member design for 32mm cabinet construction means the hardware aligns with system holes in side panels, which matches common European frameless cabinet methods and supports consistent drawer spacing across wide case runs.
Drawer material thickness of 1.3mm provides a metal wall that is slim enough to maximize interior width while still forming a defined side profile for drawer bottom and back panel engagement. This geometry supports stable box assembly using the specified components.
The white epoxy finish on the drawer material creates a coated metal surface in a neutral color tone, which coordinates with light-colored interiors and offers a smooth sidewall for sliding contact with stored items during daily opening and closing.
Why Self-Closing And Adjustment Improve Results
The built in self-closing feature automatically closes the drawer within a range of 2-5/8 inches, pulling the box into its final seated position so drawer fronts settle consistently against the cabinet front plane after a gentle push.
Height adjustment plus or minus 2mm at the drawer front lets installers shift fronts up or down slightly, which is useful for matching top and bottom reveals between adjacent units, especially when floors or walls introduce minor irregularities.
Side-to-side adjustment plus or minus 1.5mm allows fine left-right positioning of the drawer front, helping equalize gaps between neighboring fronts and side panels for a uniform grid appearance across multiple drawer stacks.
Angle adjustment plus or minus 1mm gives control over the front tilt, so installers can correct situations where one corner sits proud or tight, resulting in cleaner alignment where multiple horizontal drawer lines meet across a run.
The system is described as allowing users to assemble and install a drawer in two minutes, which supports streamlined workflow in both shop and on-site environments, reducing labor time per opening while using a consistent assembly process.
Automatic production capable design that significantly reduces the number of steps required to make a drawer fits well with jigs, boring patterns, and repetitive setups, helping shops maintain predictable cycle times and reduce handling during large projects.
Common Questions About This Zargen 6036 Slide
What load can the Zargen 6036 drawer side slide handle?
The Zargen 6036 drawer side slide has a 100lb capacity, so it supports heavier everyday contents in cabinets, helping drawers perform under typical kitchen, bath, or office loading.
How far does this Zargen drawer system extend?
The standard system is 7/8 extension, so it is effectively a 3/4 extension slide that brings most of the drawer out while keeping some length supported inside the cabinet.
Can this Zargen drawer slide be upgraded to full extension?
The system becomes fully extendable when using item number GF6200, allowing greater drawer travel for access to the rear without altering existing drawers.
How does the self-closing feature on this drawer slide work?
The built in self-closing feature automatically closes the drawer within a range of 2-5/8 inches, drawing the drawer front into position for a consistent closed alignment.
What adjustment range is available on the drawer front?
The system provides height adjustment plus or minus 2mm, side-to-side adjustment plus or minus 1.5mm, and angle adjustment plus or minus 1mm, giving precise control over front alignment.
What are the key size and finish details of this drawer side?
The drawer side height is 3-3/8 inches, material thickness is 1.3mm, and the finish is white epoxy, providing a mid-height metal side in a light, coated surface.
Selecting This Grass Zargen Slide For Your Project
This Grass Zargen drawer system combines a Zargen 6036 drawer side slide, 100lb capacity, 3/4 extension operation, and a built in self-closing feature, so it supports fast drawer assembly with front adjustment suited to precise, repeatable cabinet installations.
