Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 12 inch over-travel side-mount ball bearing drawer slide from Fulterer, rated 225 lb per pair, with a hold-in anti-rebound detent and a bright zinc finish suited to shop, garage, and industrial drawer applications.
At 225 lb per pair, this slide handles loads that would overwork a standard cabinet slide. Shop tool drawers, heavy-duty workbench pull-outs, and storage drawers carrying iron, hardware, or dense materials are where this rating matters. The over-travel action means the drawer pushes past the cabinet face when fully opened, which is the difference between reaching the back of a loaded drawer and digging for what you need. In a workbench with a countertop lip or a deep face frame in front, over-travel turns a frustrating reach into a clean pull.
The hold-in anti-rebound detent does one job well: it stops the drawer from drifting or bouncing back after you push it shut. There is no spring, no damper, and no closing assist — the detent simply holds the drawer closed until you pull it. For a loaded shop or garage drawer that takes a firm push to close, that mechanical catch prevents the rebound that a plain free-sliding slide allows.
The bright zinc finish is an electroplated coating over cold-formed steel — the segment's standard for indoor corrosion resistance. On a slide that sits beside the drawer box in a shop or utility cabinet, the finish does its job out of sight. It is not a decorative or stainless finish and is suited to dry, indoor environments. The 3/4 inch side clearance required per side is wider than the 1/2 inch standard for lighter cabinet slides, which reflects the heavier steel profile at this load class; build the drawer box accordingly.
This slide fits a specific set of needs: a heavy drawer in an indoor shop, garage, or utility setting where over-travel gives better access and a 225 lb rating provides real working margin. It is the right choice for a woodworker building out a wall of tool storage, a shop fitting heavy-pull drawers into a workstation, or a contractor installing utility cabinets that will carry weight. The non-handed design keeps inventory simple — one slide part number covers both sides of every drawer. In face-frame cabinets, rear mounting brackets are required to support the back of the slide; confirm the bracket series matches this Fulterer slide before ordering.
No. Twelve inches is the closed length of the slide. Because this is an over-travel model, the drawer member travels past that nominal length — the actual extension exceeds 12 inches. Slide length and travel are separate specs.
No. The hold-in anti-rebound detent is a mechanical catch that keeps the drawer closed and prevents bounce-back. There is no damper and no spring assist — the drawer does not slow as it closes and is not pulled shut automatically.
This slide requires 3/4 inch of side clearance per side — more than the 1/2 inch standard for lighter cabinet slides. Build the drawer box 1-1/2 inches narrower than the cabinet opening to allow 3/4 inch on each side.
No. The slide is non-handed — both pieces in the pair are identical and fit either side of the drawer.
Yes, but face-frame installation requires rear mounting brackets to support the back end of the slide. Brackets are series-specific; confirm compatibility with this Fulterer model before ordering them separately.
When the job calls for a slide that handles real weight, clears an overhang, and keeps a loaded drawer from drifting open, this zinc-finish Fulterer over-travel slide gives you all three in a non-handed, indoor-rated package.
Sold In: 8 Set
