Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Fulterer 5015 is a 36 inch over-travel side-mount ball bearing drawer slide rated 225 lb per pair, with a hold-in anti-rebound detent that keeps the drawer closed until pulled. It is designed for shop, utility, and commercial drawers where a loaded box needs to clear a worktop overhang and stay shut when you close it.
A 36 inch over-travel slide solves two problems at once: reaching the back of a deep drawer and keeping it closed when the job is rough. In a shop setting, a drawer full of hand tools or hardware can easily push past the 100 lb standard cabinet class, and a slide that only reaches the cabinet face leaves the rear of the drawer out of reach under a workbench overhang. The over-travel action on the 5015 carries the box past the face so the back of a 36 inch drawer is reachable without leaning in. The hold-in detent then keeps it closed on a busy bench where drawers can get bumped — no spring assist, no damping, just a reliable mechanical catch that releases with a normal pull.
The 5015 is cold-formed steel with a zinc electroplate finish. Zinc is the working standard for heavy-duty side-mount ball bearing slides: it provides indoor corrosion resistance without adding a decorative look that would be out of place in a shop or utility cabinet. This is not a stainless finish and is not rated for wet or outdoor environments. The slide sits beside the open drawer box and is visible in use — the zinc finish blends into most painted or unpainted cabinet interiors without standing out.
Cabinet shops building shop furniture, work stations, and utility casework reach for this slide when the load exceeds what a standard 100 lb kitchen slide handles. Contractors fitting out commercial spaces — service counters, workroom storage, institutional casework — use it where deep drawers sit under overhanging tops and must close reliably in daily use. The 3/4 inch side clearance requirement per side is wider than the 1/2 inch nominal on standard cabinet slides, so drawer box sizing needs to account for that before building. The non-handed design means one part number covers both sides, which keeps ordering straightforward on multi-drawer projects.
Past full extension — the over-travel action carries the drawer member beyond the slide's 36 inch nominal length so the box clears the cabinet face. The exact over-travel distance is not stated in the product specification; measure your overhang before ordering if that clearance is critical.
Neither. The hold-in anti-rebound detent is a mechanical catch that holds the drawer closed and prevents it from rebounding after a firm close. There is no spring to pull the drawer shut and no damper to slow it — push the drawer closed and the detent holds it there until you pull it open.
The 5015's heavy-duty profile is wider than a standard cabinet slide, requiring 3/4 inch of side clearance per side. Build the drawer box 1-1/2 inches narrower than the cabinet opening — not the 1 inch reduction used for standard slides — to fit correctly.
No. The slide is non-handed, so both pieces in the pair are identical. Order one pair per drawer regardless of which side each slide mounts on.
The slide mounts to the side of the cabinet interior. In face-frame construction the cabinet side is set back from the front frame, so rear support — mounting brackets for this series — is needed at the back of the slide. Confirm the correct rear bracket for the 5015 with your supplier before building.
When the drawer is deep, the load is real, and the top overhangs the face, the Fulterer 5015 covers all three needs in one zinc-finished, non-handed pair — over-travel reach, 225 lb capacity, and a hold-in detent that keeps the job tidy between uses.
Sold In: 4 Set
