Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Fulterer 5011 is a 28 inch over-travel side-mount ball bearing drawer slide rated 225 lb per pair, finished in zinc, with a hold-in detent that keeps the drawer closed until pulled. Designed for heavy shop drawers, utility stations, and workbench applications where the load exceeds the standard cabinet class and the drawer needs to clear an overhang at full open.
A standard full-extension slide stops at the cabinet face. This slide goes further — the drawer travels past the slide's nominal length, which matters when a worktop overhang or deep face frame would otherwise block access to the back of the drawer. Pair that with a 225 lb per-pair rating and you have a slide built for the kinds of drawers that standard kitchen hardware cannot handle: a shop drawer full of hand tools, a utility station loaded with hardware bins, or a workbench pull-out that needs to stay clear while both hands are busy. The hold-in detent stops the drawer from creeping open on an uneven floor or bouncing back after a solid close — a practical feature in any working shop environment.
Cold-formed steel members carry the load on full-length ball-bearing raceways built for the heavy-duty class. The zinc finish provides standard indoor corrosion resistance and is the appropriate choice for shop, garage, and dry utility spaces. This is a functional working finish on hardware that sits beside the drawer box — not a decorative surface and not rated for wet or outdoor exposure. For that application, select a stainless option instead.
Cabinet shops building workbenches, shop furniture, or utility cabinets with heavy pull-out drawers will find the 225 lb rating and over-travel action a natural fit. Contractors fitting out garages, service areas, or commercial utility stations get a slide that handles real working loads without stepping up to an industrial rail system. The 3/4 inch side clearance per side is wider than the standard 1/2 inch clearance on lighter cabinet slides — the drawer box must be sized accordingly: build it 1-1/2 inches narrower than the cabinet opening to leave the correct gap on each side. In face-frame cabinets, rear mounting brackets are required; these are sold separately and are series-specific.
No. The hold-in detent is a mechanical catch that keeps the drawer closed and stops it from bouncing back open — there is no damper and no spring assist. The drawer simply stays where it is pushed until intentionally pulled open.
The slide is over-travel, meaning the drawer member extends past the 28 inch nominal slide length. The exact travel distance beyond full extension is not stated in the source data; confirm the over-travel dimension with the product specification sheet if your application requires a precise number.
The heavier-duty profile of this slide is wider than a standard 100 lb cabinet slide. The 3/4 inch side clearance per side is specific to this SKU — build the drawer box 1-1/2 inches narrower than the cabinet opening to fit correctly.
No. The slide is non-handed — both pieces in the pair are identical and fit either side of the drawer.
It can, but face-frame installation requires rear mounting brackets to support the back of the slide. Brackets are sold separately and must match this series — do not substitute brackets from other slide lines.
When the drawer is loaded, the floor is not perfectly level, and the countertop overhangs the opening, this zinc-finished over-travel slide keeps the work moving — 225 lb of capacity, a detent that holds, and travel that clears the overhang so nothing has to be moved to reach the back of the drawer.
Sold In: 6 Set
