Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Fulterer 26 inch over-travel ball bearing drawer slide brings a 225 lb weight capacity and a hold-in anti-rebound detent to side-mount installations that need more than a standard cabinet slide delivers. The zinc finish keeps the steel protected for years of indoor service, and the non-handed design means one part works on either side of the drawer.
The 225 lb capacity puts this slide well into heavy-duty territory, and the over-travel action makes it the right call whenever the drawer sits under a worktop overhang or behind a thick face frame. In a shop environment, that combination matters: a tool drawer loaded with iron and steel needs a slide that handles the weight without flexing, and the over-travel means a technician or craftsman does not have to reach past a counter edge to get to the back. The hold-in anti-rebound detent adds a practical layer for any setting where a fully loaded drawer would otherwise bounce open after a firm close — a mobile shop cart, a utility cabinet beside a table saw, or a heavy storage unit in a garage or workroom.
The slide is cold-formed steel throughout, with ball bearings running in full-length raceways between the telescoping members. That bearing arrangement is what keeps the travel smooth even when the drawer is loaded to the rated capacity. The zinc finish provides corrosion resistance suited to dry indoor environments — a functional, work-oriented finish that holds up in a shop or utility space without drawing attention. At 3/4 inch side clearance per side, the slide runs slightly wider than the half-inch standard of lighter-duty models, which reflects the heavier steel profile needed to carry a 225 lb load through repeated cycles.
This is a working slide for working drawers. Cabinet shops building shop furniture, contractors fitting out utility rooms, and homeowners putting serious storage into a garage or basement will all find the 225 lb capacity and over-travel extension useful. It is the slide to reach for when a standard 100 lb kitchen slide is clearly undersized and the installation calls for a concealed-finish steel profile that blends into any painted or utility interior. The non-handed format keeps ordering simple: count the drawers, order that many pairs.
The 225 lb rating is per pair — the two slides working together. Do not double the number by counting each slide separately.
The slide is rated as over-travel, meaning the drawer member travels beyond the slide's 26 inch nominal length. The exact over-travel distance is not stated in the source data; contact Fulterer or your sales rep for the specific extension figure if the clearance past the overhang is critical to your layout.
No. The hold-in anti-rebound detent is a mechanical catch that keeps the drawer closed once shut — it does not slow or dampen the closing motion. This is a standard-motion slide with no damper.
No. The design is non-handed, so both slides in a pair are identical. Either slide fits either side of the drawer.
Side-mount slides need rear support in face-frame construction. Add the appropriate rear mounting brackets for this slide — brackets are series-specific and sold separately. Check that the brackets are rated for use with heavy-duty Fulterer slides before ordering.
When the drawer is heavy, the installation is tight, and the finish needs to hold up to daily shop use, the zinc-finished Fulterer 26 inch over-travel slide gives you the capacity, the clearance, and the stay-closed detent to keep the work moving.
Sold In: 6 Set
