Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 20 inch over-travel side-mount ball bearing drawer slide from Fulterer, rated 225 lb per pair, finished in zinc, and built for drawers that carry serious weight beneath overhanging countertops or behind deep face frames. The hold-in detent keeps the drawer closed and prevents bounce-back after a firm push shut.
A standard kitchen slide handles a pots-and-pans drawer just fine, but it falls short in two situations: when the load pushes past 100 lb and when a counter overhang or deep face frame blocks the rear of the drawer at full open. The Fulterer 5007 is built for both conditions at once. Over-travel carries the drawer past the nominal slide length so the back of the box clears the overhang entirely, and the 225 lb per-pair rating covers loaded shop drawers, heavy-duty tool storage, and industrial pull-outs that would overwork a standard cabinet slide. The hold-in detent adds a stay-closed function that is useful in any drawer subject to vibration or rough handling, from a garage cabinet to a work van.
The zinc finish over cold-formed steel is the working standard for side-mount ball bearing slides in indoor environments. It resists the light moisture exposure common in shops and utility spaces without the cost premium of stainless, and the low-profile zinc surface stays out of sight beside the drawer box once the drawer is installed. This is not a decorative finish — it is a functional one, chosen for durability and long service life in demanding indoor applications. Note that this slide requires 3/4 inch of side clearance per side, which is wider than the 1/2 inch clearance common to standard cabinet slides. Build the drawer box accordingly before ordering.
The Fulterer 5007 suits anyone building drawers where load, geometry, or environment push past standard residential specs. Cabinet shops fitting heavy storage drawers under worktops, contractors installing utility cabinetry in garages and shops, and furniture makers working on industrial benchtops with overhanging tops will find the over-travel and 225 lb capacity directly relevant. It also works well in vehicle storage and mobile equipment where the hold-in detent prevents the drawer from creeping open. The non-handed design means one SKU covers the whole project without sorting or special ordering.
Over-travel slides carry the drawer member past the slide's nominal 20 inch length. The exact over-travel distance for this series is not specified in the available data — confirm the travel dimension with the product spec sheet before sizing the cabinet if the clearance is tight.
No. The hold-in detent is a mechanical catch that keeps the drawer closed and prevents it from bouncing back open once pushed shut. It does not spring-assist the close and it does not damp the closing motion — the drawer goes where you put it and stays there.
At the 225 lb heavy-duty class, the slide profile is wider and more robust than a standard 100 lb cabinet slide. The extra 1/4 inch per side accommodates the heavier steel members. Size the drawer box 1-1/2 inches narrower than the cabinet opening total — 3/4 inch on each side — rather than the 1 inch reduction used for standard slides.
Yes. The slide is symmetrical, so a single part number fits both the left and right side of the drawer. Order the pair quantity your drawer count requires and install them without sorting.
Side-mount slides installed in face-frame cabinets need rear support because the cabinet side is set back from the front frame. Confirm rear mounting bracket availability for this Fulterer series — brackets are series-specific and typically sold separately — before specifying this slide in face-frame construction.
When the drawer is heavy, the geometry is awkward, and the slide has to stay closed under real-world use, the Fulterer 5007 delivers all three — 225 lb capacity, over-travel clearance, and a hold-in detent — in a zinc-finished, non-handed package built for daily industrial and shop service.
Sold In: 1 Set
