Zargen 6436 Drawer Slide with 100lb Capacity, 3/4 Extension, 9", White Epoxy, 16
Description
Zargen 6436 Drawer Slide For Fast Euro Drawers
Zargen 6436 drawer slide with 100lb capacity gives a drawer build that supports heavy everyday loads, so shop-built drawers can handle typical residential or light commercial service without redesigning the box. The integrated Euro drawer slide and metal side panel system is cost effective, because it replaces separate slide and side components with one coordinated system. Automatic production capable design significantly reduces the number of steps required to make a drawer, which shortens assembly time on repeat cabinet runs. Cabinet member design allows for use in 32mm cabinet construction for easy and accurate installations, letting case rows line up off system holes. Drawer material thickness is 1.3mm in a white epoxy finish, creating a consistent side profile ready for front mounting in visible applications.
Key Zargen 6436 Details That Speed Production
- The integrated Euro drawer slide and metal side panel system combines slide and side in one assembly, so fabricators avoid separate side machining and save setup time on each drawer run.
- Automatic production capable design significantly reduces the number of steps required to make a drawer, helping shops push more completed drawers through edge banders and assembly cells in the same shift.
- Cabinet member design allows for use in 32mm cabinet construction for easy and accurate installations, so drill patterns stay consistent from cabinet to cabinet and drawer alignment follows the system holes.
- The system allows for drawer fronts to be easily adjusted in three ways, turning fine-tuning height, side-to-side, and angle into a simple adjustment step at install instead of reboring parts.
- Drawer material thickness is 1.3mm in a white epoxy finish, giving a metal drawer side that stays slim while providing a clean, uniform color reference for aligning fronts across a bank of drawers.
Slide Extension, Capacity, And Front Adjustment Setup
This Zargen 6436 drawer slide with 100lb capacity is specified for loads up to 100lb, so it supports typical kitchen, bath, or office drawer contents within that range. Standard system is 7/8 extension, so most of the drawer box opens while maintaining support inside the cabinet. Using item number GF6200, the slide system becomes fully extendable, which lets the drawer travel completely forward while retaining the same basic drawer construction. Built in self-closing feature automatically closes the drawer within a range of 2-5/8 inches, pulling the drawer shut over the last part of travel. The system allows for drawer fronts to be easily adjusted in three ways: height adjustment plus or minus 2mm, side-to-side adjustment plus or minus 1.5mm, and angle adjustment plus or minus 1mm, letting installers dial in consistent gaps.
How This Grass Zargen Drawer System Works In Practice
Where The Metal Side Drawer System Fits Best
The Zargen integrated Euro drawer slide and metal side panel system is designed for cabinet makers using system construction, so it drops directly into layouts based on drilling patterns and row spacing. Cabinet member design allows for use in 32mm cabinet construction, which means cases built around line-bore equipment can use these parts without custom hole schemes. Drawer systems are available in five drawer side heights: 1-11/16 inch, 3-3/8 inch, 4-5/8 inch, 5-7/8 inch, and a further size, allowing cabinet shops to match side height to the storage requirement. Cabinet maker provides drawer front, rear drawer panel, and drawer bottom, keeping the core box materials in the shop while relying on Zargen for the metal running components and sidewalls. Zargen 6436 drawer slide with 100lb capacity fits this system by carrying the load and guiding the drawer along its path.
Why Zargen Adjustments And Extension Help Alignment
The system allows for drawer fronts to be easily adjusted in three ways, so installers can use height adjustment plus or minus 2mm to bring top and bottom reveals into line across a run of cabinets. Side-to-side adjustment plus or minus 1.5mm lets each front shift slightly left or right, which is helpful when face gaps vary slightly from case to case. Angle adjustment plus or minus 1mm lets the front tilt just enough to correct for racking in the cabinet or small squareness variations, improving visual alignment. Standard system is 7/8 extension, so the drawer stays well supported inside the cabinet during opening and closing. Using item number GF6200, the slide system becomes fully extendable, allowing access to the full drawer length while retaining the same drawer box components. Existing drawers do not have to be altered, so a shop can switch extension style while keeping the same basic drawer body design already in production.
Common Questions About The Zargen 6436 Slide
What type of drawer construction does the Zargen 6436 support?
The Zargen integrated Euro drawer slide and metal side panel system supports drawer construction where the cabinet maker provides the drawer front, rear panel, and bottom, so only those three parts are machined in the shop.
How does this slide work with 32mm cabinet construction?
Cabinet member design allows for use in 32mm cabinet construction, so the slide positions off system holes and fits cases drilled on standard line-boring equipment.
What load can the Zargen 6436 drawer slide handle?
The Zargen 6436 drawer slide with 100lb capacity is rated for loads up to 100lb, which covers typical kitchen, bath, and office drawer contents within that weight range.
How far does the standard Zargen 6436 drawer extend?
Standard system is 7/8 extension, so the drawer projects most of its depth from the cabinet while keeping part of the box supported inside the case.
Can the Zargen 6436 system be converted to full extension?
The Zargen 6436 system becomes fully extendable by using item number GF6200, allowing full drawer travel while keeping the same general drawer box layout.
What front adjustments are available on this drawer system?
The system allows for drawer fronts to be adjusted with height plus or minus 2mm, side-to-side plus or minus 1.5mm, and angle plus or minus 1mm, helping align reveals and margins.
Select This Zargen Slide For System Cabinets
The Zargen 6436 drawer slide with 100lb capacity, 3/4 extension, integrated Euro drawer slide and metal side panel system, and white epoxy 1.3mm drawer sides give cabinet shops a defined approach to system drawers. Cabinet member design tuned for 32mm cabinet construction aligns with modern line-bored cases, while the three-way front adjustment allows finished fronts to be set accurately after the boxes are installed. Built in self-closing feature that automatically closes the drawer within a range of 2-5/8 inches adds a controlled closing action to the finished piece. For projects built around Grass Zargen drawer system components, this part number 22911-03 provides a consistent platform for repeatable drawer production.
