Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Dierdra cabinet pull 224mm is a zinc handle with an 8-13/16 inch center to center, so it spans standard drill patterns used on many cabinet doors and drawers. The pull uses zinc material, which gives a solid metal feel during everyday opening and closing. A weathered nickel finish is applied to the zinc, so the handle presents a muted metallic look that coordinates with a range of cabinet colors. The overall length measures 9-1/2 inches, which visually balances wider drawer fronts and larger doors. A projection of 1-3/8 inches sets the gripping surface away from the cabinet face, creating finger clearance when grabbing from different angles. The 5/8 inch width runs along the front of the pull, giving a slim profile while still offering a defined edge to grab. Manufacturer part number 9811-10WN-P identifies this specific size, finish, and collection inside the Dierdra series.
This Dierdra pull uses an 8-13/16 inch center to center dimension, giving a precise reference for drilling new cabinet fronts or lining up with existing bores. The 224 mm spacing translates directly to metric layouts often seen on shop jigs and drilling templates. An overall length of 9-1/2 inches means the handle covers a wider area than the hole spread, which helps when laying out handles on larger drawer fronts. With a 1-3/8 inch projection, the handle stands off the face enough to grasp from above or below, even on thicker drawer fronts. The 5/8 inch width presents a narrow footprint, which helps maintain proportional spacing when multiple pulls are installed in a row across banks of drawers.
The Berenson Corporation Dierdra pull sits in the decorative hardware and moldings category, specifically within handles and pulls, so it is suited to cabinet and furniture front applications. Its 8-13/16 inch center to center dimension positions it for doors and drawers that benefit from a longer grip area, such as wider kitchen drawers. The 9-1/2 inch overall length gives enough visual presence for pantry fronts or tall cabinet doors without dominating the panel. With a projection of 1-3/8 inches, the pull creates hand room in front of face frames or overlay doors, which helps when multiple pulls are installed close together. The 5/8 inch width keeps the footprint lean, so it works on both narrow stile applications and broader slab fronts in the same run. A weathered nickel finish supports use across projects that call for a softer, aged metal appearance rather than a bright shine, tying together mixed finishes in a room. The zinc material under the finish provides a uniform base for each pull in the Dierdra collection, helping maintain a consistent look across every opening on the job.
The 224 mm center to center, listed as 8-13/16 inches, gives a clear dimension for aligning drilling jigs, which reduces layout variation across multiple cabinet fronts. That fixed spacing also supports direct replacement on cabinets already drilled to 224 mm, keeping existing bore locations in service. The 9-1/2 inch total length offers coverage around the bore area, helping to conceal minor scuffs or impressions from earlier hardware during a remodel. With a 1-3/8 inch projection, the pull establishes a predictable stand-off, which matters when matching adjacent hardware depths along a long run of cabinetry. The 5/8 inch width makes it easier to maintain equal margins from door edges, simplifying repeated layout on both left and right handing. The manufacturer part number 9811-10WN-P ties these dimensions, the Dierdra series identity, zinc construction, and weathered nickel finish together, so the same specification can be repeated accurately across orders and projects.
The Dierdra pull has an 8-13/16 inch, or 224 mm, center to center, so drilling or replacement can follow that exact hole spacing across cabinet doors and drawers.
The Berenson Dierdra 9811-10WN-P handle measures 9-1/2 inches overall length, giving extra coverage beyond the mounting holes on wider drawers or doors.
The weathered nickel Dierdra pull projects 1-3/8 inches from the cabinet face, creating consistent finger clearance for gripping from different angles.
The Berenson Dierdra cabinet pull has a 5/8 inch width, so it presents a narrow profile that suits both slim stiles and wider slab fronts.
The Dierdra pull is made from zinc with a weathered nickel finish, pairing a solid metal base with a muted metallic surface appearance on cabinets.
The 9811-10WN-P part number identifies this specific Dierdra size, center to center, material, and weathered nickel finish for repeat orders and consistent matching.
The Dierdra series 8-13/16 inch center to center pull combines a 224 mm mounting dimension, 9-1/2 inch overall length, and 1-3/8 inch projection, so it suits longer cabinet fronts needing a defined grip. The zinc construction with weathered nickel finish, backed by the 9811-10WN-P designation, helps keep material, size, and appearance coordinated wherever this handle is specified across a project.
Sold In: 1 Each
